Used Mercedes GLC Class control arm from a salvage yard

Vehicle-specific price guide

How much is a used Mercedes GLC Class control arm?

Asking prices from 147 salvage yards in 35 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 16, 2026
Strong coverage2,457 priced of 2,975 observed2 variantsMethodology v2.1 →

Part overview

About the Mercedes GLC Class control arm

What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →

Also known asLower Control ArmA-ArmWishbone
Price summary

A used Mercedes GLC Class control arm costs $35 to $500, with a median asking price of $100. Based on 2,457 priced salvage yard listings across the US, compatible across 2015–2024 (10 model years), updated Oct 16, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$100
Grade B (good)$75

Mercedes GLC Class control arm price snapshot

USD
Low
$35
Average
$133
High
$500
2,975 listings observed · 2,457 priced13d ago· How we price·

Report incorrect price

Reporting price for Mercedes GLC Class Control Arm

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$35–$5001,970 listings
Grade BStandard used$45–$419392 listings
Grade XUngraded$45–$35095 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $35–$500 overall range

Regional supply

Where the Mercedes GLC Class control arm is listed

We found priced Mercedes GLC Class control arm listings at 147 salvage yards across 35 states. California supplies the most, with 1,079 listings (44% of the total) from 21 yards. Location matters: yards in California ask a median $75, while North Carolina yards ask $221, 195% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California1,07921$75-25%
Florida19015$202+102%
South Carolina1463$100
Michigan12016$125+25%
Wisconsin1087$143+43%
North Carolina898$221+121%
Kentucky795$198+98%
Ohio745$150+50%

States with at least 10 priced listings. % is versus the $100 national median.

Replacement cost

What is the Mercedes GLC Class control arm replacement cost?

ESTIMATE
Used part
$100
Mercedes GLC Class median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$195–$550
median used part + labor

Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Mercedes GLC Class Control Arm

$

Current avg: $133 — we suggest $113 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2024)

Model-year comparison

What does a Mercedes GLC Class control arm cost by year?

$68$110$152$194$236201620172018201920202021202220232024
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Mercedes GLC Class control arm cost?

Asking prices for a used Mercedes GLC Class control arm are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 33% premium over grade-B stock, with grade-A medians at $100.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, Non-Interchange search using Mercedes GLC Class and similar models, lists at a $221 median, while Non-Interchange search using only Mercedes GLC Class commands $237, a 7% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $75, while 2024 tops the table at $225. Parts from 2015–2022 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 8 compatible years.

Against comparable vehicles, the Mercedes GLC Class sits 48% below the Toyota 4Runner ($193), 44% below the Mercedes S Class ($180), and level with the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used control arm: what to check

  1. Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
  2. Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
  3. Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
  4. Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
  5. Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.

Keep browsing this vehicle

What other Mercedes GLC Class parts are priced?

Price comparisons

Compare Mercedes GLC Class control arm prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Mercedes GLC Class control arm FAQ

How much is a used control arm for a Mercedes GLC Class?

The median asking price is $100 across 2,457 priced listings from 147 yards. Grade-A units, the cleanest stock, have a median of $100. 2022 is the cheapest model year we track, with a median of $75.

How much does it cost to replace a Mercedes GLC Class control arm?

Using a used part, a Mercedes GLC Class control arm replacement typically runs $195–$550 all-in: the median used control arm for this model lists at $100, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.

Which Mercedes GLC Class model years does this price guide cover?

This guide currently has year-level pricing for 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Mercedes GLC Class control arm years are interchangeable?

Salvage-yard interchange data links Mercedes GLC Class control arm fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024. Searching all 10 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Mercedes GLC Class Control Arm Cost — From $35 to $500