Used Buick Regal intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used Buick Regal intake manifold?

Asking prices from 110 salvage yards in 23 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 11, 2026
Strong coverage359 priced of 536 observed2 variantsMethodology v2.1 →

Part overview

About the Buick Regal intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used Buick Regal intake manifold costs $30 to $215, with a median asking price of $75. Based on 359 priced salvage yard listings across the US, compatible across 2010–2021 (12 model years), updated Oct 11, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$75
Grade B (good)$106
Grade C (fair)$75

Buick Regal intake manifold price snapshot

USD
Low
$30
Average
$89
High
$215
536 listings observed · 359 priced17d ago· How we price·

Report incorrect price

Reporting price for Buick Regal Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$30–$215245 listings
Grade BStandard used$50–$18652 listings
Grade CVisible wear$51–$1007 listings
Grade XUngraded$40–$15055 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $30–$215 overall range

Regional supply

Where the Buick Regal intake manifold is listed

We found priced Buick Regal intake manifold listings at 110 salvage yards across 23 states. California supplies the most, with 141 listings (39% of the total) from 24 yards. Location matters: yards in Florida ask a median $60, while Illinois yards ask $148, 147% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California14124$71-5%
Florida4920$60-20%
Illinois183$148+97%
Texas163$96+28%
Arizona1512$96+28%
Iowa153$146+95%
South Carolina114$100+33%
Tennessee112$96+28%

States with at least 10 priced listings. % is versus the $75 national median.

Replacement cost

What is the Buick Regal intake manifold replacement cost?

ESTIMATE
Used part
$75
Buick Regal median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$265–$825
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Buick Regal Intake Manifold

$

Current avg: $89 — we suggest $76 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2020)

2.0L35 listingsInterchange 2016–2021$79$50 – $162
3.6L32 listingsInterchange 2017–2019$131$56 – $193

Model-year comparison

What does a Buick Regal intake manifold cost by year?

$37$54$71$88$105201520162017201820192020
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Buick Regal intake manifold cost?

Asking prices for a used Buick Regal intake manifold are unusually spread out: the top listing asks about 7 times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 2.0L, lists at a $79 median, while 3.6L commands $131, a 66% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $41, while 2018 tops the table at $100. Parts from 2010–2017 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 8 compatible years.

Against comparable vehicles, the Buick Regal sits 59% below the Mercedes S Class ($181), 68% below the Ram 3500 ($235), and 40% below the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other Buick Regal parts are priced?

Price comparisons

Compare Buick Regal intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Buick Regal intake manifold FAQ

How much is a used intake manifold for a Buick Regal?

The median asking price is $75 across 359 priced listings from 110 yards. Grade-A units, the cleanest stock, have a median of $75. 2016 is the cheapest model year we track, with a median of $41.

How much does it cost to replace a Buick Regal intake manifold?

Using a used part, a Buick Regal intake manifold replacement typically runs $265–$825 all-in: the median used intake manifold for this model lists at $75, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which Buick Regal model years does this price guide cover?

This guide currently has year-level pricing for 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Buick Regal intake manifold years are interchangeable?

Salvage-yard interchange data links Buick Regal intake manifold fitments across 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Buick Regal Intake Manifold Cost — From $30 to $215