Used Hyundai Kona intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used Hyundai Kona intake manifold?

Asking prices from 125 salvage yards in 34 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 24, 2026
Strong coverage470 priced of 587 observed2 variantsMethodology v2.1 →

Part overview

About the Hyundai Kona intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used Hyundai Kona intake manifold costs $75 to $484, with a median asking price of $211. Based on 470 priced salvage yard listings across the US, compatible across 2017–2026 (10 model years), updated Sep 24, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$211
Grade B (good)$211

Hyundai Kona intake manifold price snapshot

USD
Low
$75
Average
$207
High
$484
587 listings observed · 470 priced1mo ago· How we price·

Report incorrect price

Reporting price for Hyundai Kona Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$75–$390362 listings
Grade BStandard used$93–$48473 listings
Grade XUngraded$85–$38035 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $75–$484 overall range

Regional supply

Where the Hyundai Kona intake manifold is listed

We found priced Hyundai Kona intake manifold listings at 125 salvage yards across 34 states. California supplies the most, with 128 listings (27% of the total) from 26 yards. Location matters: yards in Indiana ask a median $150, while Michigan yards ask $295, 97% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California12826$170-19%
Texas578$195-8%
Louisiana283$243+15%
Indiana226$150-29%
Michigan218$295+40%
Georgia212$236+12%
Ohio187$230+9%
Florida179$253+20%

States with at least 10 priced listings. % is versus the $211 national median.

Replacement cost

What is the Hyundai Kona intake manifold replacement cost?

ESTIMATE
Used part
$211
Hyundai Kona median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$400–$960
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Hyundai Kona Intake Manifold

$

Current avg: $207 — we suggest $176 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

1.6L (turbo)14 listingsInterchange 2022–2024$231$149 – $330
2.0L12 listingsInterchange 2021–2025$274$216 – $350

Model-year comparison

What does a Hyundai Kona intake manifold cost by year?

$118$153$188$223$25820182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Hyundai Kona intake manifold cost?

Asking prices for a used Hyundai Kona intake manifold are unusually spread out: the top listing asks about 6 times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 1.6L (turbo), lists at a $231 median, while 2.0L commands $274, a 19% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2018 units carry the lowest median at $131, while 2023 tops the table at $246. Parts from 2017–2024 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 8 compatible years.

Against comparable vehicles, the Hyundai Kona sits 17% above the Mercedes S Class ($181), 10% below the Ram 3500 ($235), and 67% above the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other Hyundai Kona parts are priced?

Price comparisons

Compare Hyundai Kona intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Hyundai Kona intake manifold FAQ

How much is a used intake manifold for a Hyundai Kona?

The median asking price is $211 across 470 priced listings from 125 yards. Grade-A units, the cleanest stock, have a median of $211. 2018 is the cheapest model year we track, with a median of $131.

How much does it cost to replace a Hyundai Kona intake manifold?

Using a used part, a Hyundai Kona intake manifold replacement typically runs $400–$960 all-in: the median used intake manifold for this model lists at $211, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which Hyundai Kona model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Hyundai Kona intake manifold years are interchangeable?

Salvage-yard interchange data links Hyundai Kona intake manifold fitments across 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 10 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Hyundai Kona Intake Manifold Cost — From $75 to $484