Used Infiniti QX60 intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used Infiniti QX60 intake manifold?

Asking prices from 217 salvage yards in 36 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026
Strong coverage528 priced of 855 observed2 variantsMethodology v2.1 →

Part overview

About the Infiniti QX60 intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used Infiniti QX60 intake manifold costs $30 to $350, with a median asking price of $100. Based on 528 priced salvage yard listings across the US, compatible across 2007–2025 (19 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$100
Grade B (good)$90
Grade C (fair)$100

Infiniti QX60 intake manifold price snapshot

USD
Low
$30
Average
$114
High
$350
855 listings observed · 528 priced7d ago· How we price·

Report incorrect price

Reporting price for Infiniti QX60 Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$30–$350351 listings
Grade BStandard used$40–$26298 listings
Grade CVisible wear$40–$1004 listings
Grade XUngraded$38–$35075 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $30–$350 overall range

Regional supply

Where the Infiniti QX60 intake manifold is listed

We found priced Infiniti QX60 intake manifold listings at 217 salvage yards across 36 states. California supplies the most, with 137 listings (19% of the total) from 20 yards. Location matters: yards in Florida ask a median $80, while Michigan yards ask $127, 59% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California13720$100
Illinois7814$102+2%
Texas7318$96-4%
Michigan6016$127+27%
Indiana5611$91-9%
Minnesota369$99-1%
Iowa327$108+8%
Florida3010$80-20%

States with at least 10 priced listings. % is versus the $100 national median.

Replacement cost

What is the Infiniti QX60 intake manifold replacement cost?

ESTIMATE
Used part
$100
Infiniti QX60 median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$290–$850
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Infiniti QX60 Intake Manifold

$

Current avg: $114 — we suggest $97 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

Non-Interchange search using Infiniti QX60 and similar models

1 listings
$350$350 – $350

Non-Interchange search using only Infiniti QX60

1 listings
$350$350 – $350

Model-year comparison

What does a Infiniti QX60 intake manifold cost by year?

$68$143$218$293$3682015201620172018201920202022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Infiniti QX60 intake manifold cost?

Asking prices for a used Infiniti QX60 intake manifold are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.

Model year matters too: 2019 units carry the lowest median at $76, while 2025 tops the table at $350. Parts from 2016–2025 are interchangeable, so if the 2019 fits your vehicle, it offers the best value across 8 compatible years.

Against comparable vehicles, the Infiniti QX60 sits 45% below the Mercedes S Class ($181), 57% below the Ram 3500 ($235), and 21% below the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other Infiniti QX60 parts are priced?

Price comparisons

Compare Infiniti QX60 intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Infiniti QX60 intake manifold FAQ

How much is a used intake manifold for a Infiniti QX60?

The median asking price is $100 across 528 priced listings from 217 yards. Grade-A units, the cleanest stock, have a median of $100. 2019 is the cheapest model year we track, with a median of $76.

How much does it cost to replace a Infiniti QX60 intake manifold?

Using a used part, a Infiniti QX60 intake manifold replacement typically runs $290–$850 all-in: the median used intake manifold for this model lists at $100, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which Infiniti QX60 model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Infiniti QX60 intake manifold years are interchangeable?

Salvage-yard interchange data links Infiniti QX60 intake manifold fitments across 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 19 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Infiniti QX60 Intake Manifold Cost — From $30 to $350