Mazda Miata intake manifold price snapshot
- Low
- $81
- Average
- $254
- High
- $495
Vehicle-specific price guide
How much is a used Mazda Miata intake manifold?
Asking prices from 32 salvage yards in 16 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 29, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Mazda Miata intake manifold
What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →
Also known asInlet Manifold
Price summary
A used Mazda Miata intake manifold costs $81 to $495, with a median asking price of $200. Based on 71 priced salvage yard listings across the US, compatible across 2006–2025 (17 model years), updated Oct 29, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$185
Grade C (fair)$125
USD
Condition comparison
Price by part grade
Grade AClean / low wear$81–$42551 listings
Grade CVisible wear$125–$1251 listings
Grade XUngraded$125–$49519 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $81–$425 | 51 | |
| Grade CVisible wear | $125–$125 | 1 | |
| Grade XUngraded | $125–$495 | 19 |
Median by grade
Grade price comparison
Grade A$185
Grade C$125
Ungraded$345
Median asking price by seller-reported condition grade · $81–$495 overall range
Regional supply
Where the Mazda Miata intake manifold is listed
We found priced Mazda Miata intake manifold listings at 32 salvage yards across 16 states. California supplies the most, with 18 listings (25% of the total) from 9 yards. Location matters: yards in California ask a median $175, while Texas yards ask $460, 163% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 18 | 9 | $175-12% |
| Texas | 16 | 4 | $460+130% |
States with at least 10 priced listings. % is versus the $200 national median.
Replacement cost
What is the Mazda Miata intake manifold replacement cost?
- Used part
- $200
- Mazda Miata median asking price
- Labor
- $190–$750
- 2–5 hours at $95–$150/hr
- Estimated total
- $390–$950
- median used part + labor
Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Non-Interchange search using Mazda Miata MX5 and similar models
1 listings$495$495 – $495Non-Interchange search using only Mazda Miata MX5
1 listings$495$495 – $495Model-year comparison
What does a Mazda Miata intake manifold cost by year?
20252 listings$495$495 – $49520242 listings$495$495 – $49520233 listingsFits 2 years$495$376 – $49520223 listingsFits 3 years$495$376 – $49520213 listingsFits 2 years$495$376 – $49520203 listingsFits 3 years$495$376 – $495201723 listingsFits 3 years$212$121 – $425201623 listingsFits 3 years$212$121 – $425201577 listingsFits 10 years$185$81 – $341
Market analysis
How much does a used Mazda Miata intake manifold cost?
Asking prices for a used Mazda Miata intake manifold are unusually spread out: the top listing asks about 6 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 48% premium over grade-C stock, with grade-A medians at $185.
Model year matters too: 2015 units carry the lowest median at $185, while 2020 tops the table at $495. Parts from 2006–2015 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 10 compatible years.
Against comparable vehicles, the Mazda Miata sits 10% above the Mercedes S Class ($181), 15% below the Ram 3500 ($235), and 59% above the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used intake manifold: what to check
- Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
- Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
- Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
- Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
- Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.
Keep browsing this vehicle
What other Mazda Miata parts are priced?
01wide ±201%
Transmission Control Module
$118median
$25$500
02wide ±183%
Car Radio
$167median
$40$650
03wide ±94%
Axle Shaft
$155median
$50$340
04wide ±205%
Strut
$125median
$37$550
05wide ±111%
Brake Caliper
$128median
$25$310
06spread ±55%
Quarter Panel
$550median
$275$880
07wide ±185%
Wheels
$150median
$50$605
08wide ±231%
Fog Light
$104median
$20$500
09wide ±96%
Door Assembly
$515median
$150$1,140
10wide ±223%
Air Bag
$216median
$50$1,013
11wide ±89%
Side Mirror
$200median
$70$424
12wide ±84%
Control Arm
$100median
$39$207
Price comparisons
Compare Mazda Miata intake manifold prices
Intake Manifoldcompare
MercedesSClassvsMazdaMiata
Class$181
Miata$200
$19 diff2,708 listings
Intake ManifoldcompareRam3500vsMazdaMiata
3500$235
Miata$200
$35 diff2,168 listings
Intake ManifoldcompareMercedesEClassvsMazdaMiata
Class$126
Miata$200
$74 diff2,022 listings
Intake ManifoldcompareSubaruWRXvsMazdaMiata
WRX$125
Miata$200
$75 diff1,853 listings
Intake ManifoldcompareMercedesGLEClassvsMazdaMiata
Class$100
Miata$200
$100 diff1,821 listings
Intake ManifoldcompareRam1500vsMazdaMiata
1500$135
Miata$200
$65 diff1,759 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±99%
Acura ILX
$125median
$30$278
Acurawide ±75%
Acura Integra
$56median
$36$120
Acurawide ±237%
Acura MDX
$99median
$30$500
Acurawide ±140%
Acura RDX
$75median
$25$235
Acurawide ±120%
Acura TLX
$110median
$38$303
Audiwide ±138%
Audi A4
$90median
$50$299
Audiwide ±134%
Audi A6
$150median
$38$440
Audiwide ±150%
Audi Q3
$100median
$50$350
Audiwide ±190%
Audi Q5
$126median
$40$520
Audiwide ±149%
Audi Q7
$131median
$50$440
Mazdawide ±98%
Mazda 3
$171median
$60$395
Mazdawide ±73%
Mazda CX5
$150median
$80$300
Common questions
Mazda Miata intake manifold FAQ
How much is a used intake manifold for a Mazda Miata?
The median asking price is $200 across 71 priced listings from 32 yards. Grade-A units, the cleanest stock, have a median of $185. 2015 is the cheapest model year we track, with a median of $185.
How much does it cost to replace a Mazda Miata intake manifold?
Using a used part, a Mazda Miata intake manifold replacement typically runs $390–$950 all-in: the median used intake manifold for this model lists at $200, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.
Which Mazda Miata model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Mazda Miata intake manifold years are interchangeable?
Salvage-yard interchange data links Mazda Miata intake manifold fitments across 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2021, 2023, 2024, 2025. Searching all 17 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.