Used Nissan Titan master cylinder from a salvage yard

Vehicle-specific price guide

How much is a used Nissan Titan master cylinder?

Asking prices from 410 salvage yards in 43 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 29, 2026
Strong coverage1,399 priced of 1,716 observed14 variantsMethodology v2.1 →

Part overview

About the Nissan Titan master cylinder

What the master cylinder does, common failure signs, and prices across all vehicles: used master cylinder price guide →

Also known asBrake Master Cylinder
Price summary

A used Nissan Titan master cylinder costs $90 to $746, with a median asking price of $245. Based on 1,399 priced salvage yard listings across the US, compatible across 2016–2024 (9 model years), updated Oct 29, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$288
Grade B (good)$263
Grade C (fair)$182

Nissan Titan master cylinder price snapshot

USD
Low
$90
Average
$293
High
$746
1,716 listings observed · 1,399 pricedUpdated 20h ago· How we price·

Report incorrect price

Reporting price for Nissan Titan Master Cylinder

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$90–$700702 listings
Grade BStandard used$90–$746456 listings
Grade CVisible wear$182–$1826 listings
Grade XUngraded$120–$500235 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $90–$746 overall range

Regional supply

Where the Nissan Titan master cylinder is listed

We found priced Nissan Titan master cylinder listings at 410 salvage yards across 43 states. Texas supplies the most, with 507 listings (13% of the total) from 44 yards. Location matters: yards in North Carolina ask a median $200, while California yards ask $350, 75% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas50744$296+21%
Florida40823$243-1%
Georgia33016$262+7%
North Carolina31224$200-18%
Michigan26716$225-8%
Tennessee12818$240-2%
California12321$350+43%
Pennsylvania12015$336+37%

States with at least 10 priced listings. % is versus the $245 national median.

Replacement cost

What is the Nissan Titan master cylinder replacement cost?

ESTIMATE
Used part
$245
Nissan Titan median asking price
Labor
$145–$450
1.5–3 hours at $95–$150/hr
Estimated total
$390–$695
median used part + labor

Labor is a typical independent-shop range for master cylinder replacement, not a quote for your vehicle; it does not include brake fluid and full system bleed at all four wheels. The part price is the live median from the salvage-yard listings on this page. Full master cylinder replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Nissan Titan Master Cylinder

$

Current avg: $293 — we suggest $249 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2020)

Crew Cab, 4x2, Platinum Reserve44 listingsInterchange 2017–2021$225$90 – $690
Crew Cab, 4x2, SL44 listingsInterchange 2017–2021$225$90 – $690
Crew Cab, 4x2, SV44 listingsInterchange 2017–2021$225$90 – $690
Crew Cab, 4x4, Platinum Reserve43 listingsInterchange 2017–2021$254$125 – $690
Crew Cab, 4x4, SL43 listingsInterchange 2017–2021$254$125 – $690
Crew Cab, 4x4, SV43 listingsInterchange 2017–2021$300$126 – $500
Crew Cab, 4x2, S38 listingsInterchange 2017–2021$306$115 – $500
Crew Cab, 4x4, S35 listingsInterchange 2017–2021$275$168 – $655
King Cab, 4x4, SV32 listingsInterchange 2017–2018$225$196 – $505
Crew Cab, 4x4, PRO-4X31 listingsInterchange 2017–2021$300$155 – $650
King Cab, 4x2, SV15 listingsInterchange 2017–2021$251$135 – $700
King Cab, 4x2, S12 listingsInterchange 2017–2021$600$321 – $746
King Cab, 4x4, S4 listingsInterchange 2017–2019$206$125 – $225

King Cab, 4x4, PRO-4X

2 listings
Interchange 2017–2018$376$300 – $376

Model-year comparison

What does a Nissan Titan master cylinder cost by year?

$208$234$261$287$3142016201720182020
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Nissan Titan master cylinder cost?

Asking prices for a used Nissan Titan master cylinder are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 58% premium over grade-C stock, with grade-A medians at $288.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, King Cab, 4x4, S, lists at a $206 median, while King Cab, 4x2, S commands $600, a 191% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2018 units carry the lowest median at $231, while 2016 tops the table at $299. Parts from 2017–2021 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Nissan Titan sits 277% above the Ford Mustang ($65), 283% above the Honda Civic ($64), and 277% above the Mercedes E Class ($65) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used master cylinder: what to check

  1. Inspect rear piston seal for fluid leaks: Check the rear mounting flange for wet fluid leakage that damages power brake booster rubber diaphragms.
  2. Verify reservoir clarity and mounting grommets: Inspect the plastic fluid reservoir for sun-embrittled walls, cracks, or hardened rubber mounting grommets.
  3. Check brake line port thread types: Verify whether hydraulic output ports use metric bubble flares or inverted flare threads before connecting brake lines.
  4. Confirm fluid level sensor plug condition: Check the fluid level float switch connector for corrosion or broken locking tabs to avoid low-fluid dash warnings.
  5. Bench bleed before vehicle installation: Purge trapped air from internal piston chambers using a bench bleed kit before attaching vehicle brake lines.

Keep browsing this vehicle

What other Nissan Titan parts are priced?

Price comparisons

Compare Nissan Titan master cylinder prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Nissan Titan master cylinder FAQ

How much is a used master cylinder for a Nissan Titan?

The median asking price is $245 across 1,399 priced listings from 410 yards. Grade-A units, the cleanest stock, have a median of $288. 2018 is the cheapest model year we track, with a median of $231.

How much does it cost to replace a Nissan Titan master cylinder?

Using a used part, a Nissan Titan master cylinder replacement typically runs $390–$695 all-in: the median used master cylinder for this model lists at $245, and independent-shop labor for master cylinder replacement typically takes 1.5–3 hours at $95–$150/hr ($145–$450). The labor figure does not include brake fluid and full system bleed at all four wheels. Labor is a national part-level estimate, not a quote for your vehicle.

Which Nissan Titan model years does this price guide cover?

This guide currently has year-level pricing for 2024, 2023, 2022, 2020, 2018, 2017, 2016. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Nissan Titan master cylinder years are interchangeable?

Salvage-yard interchange data links Nissan Titan master cylinder fitments across 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024. Searching all 9 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Nissan Titan Master Cylinder Cost — From $90 to $746