Used Nissan Murano master cylinder from a salvage yard

Vehicle-specific price guide

How much is a used Nissan Murano master cylinder?

Asking prices from 98 salvage yards in 31 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026
Strong coverage511 priced of 571 observed2 variantsMethodology v2.1 →

Part overview

About the Nissan Murano master cylinder

What the master cylinder does, common failure signs, and prices across all vehicles: used master cylinder price guide →

Also known asBrake Master Cylinder
Price summary

A used Nissan Murano master cylinder costs $25 to $337, with a median asking price of $99. Based on 511 priced salvage yard listings across the US, compatible across 2015–2025 (11 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$99
Grade B (good)$99
Grade C (fair)$57

Nissan Murano master cylinder price snapshot

USD
Low
$25
Average
$106
High
$337
571 listings observed · 511 priced11d ago· How we price·

Report incorrect price

Reporting price for Nissan Murano Master Cylinder

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$25–$337341 listings
Grade BStandard used$25–$331157 listings
Grade CVisible wear$57–$571 listings
Grade XUngraded$45–$10012 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $25–$337 overall range

Regional supply

Where the Nissan Murano master cylinder is listed

We found priced Nissan Murano master cylinder listings at 98 salvage yards across 31 states. Arizona supplies the most, with 142 listings (22% of the total) from 10 yards. Location matters: yards in Arizona ask a median $60, while Nebraska yards ask $209, 248% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Arizona14210$60-39%
Illinois1328$99
Florida1016$99
California5614$100+1%
Texas446$175+77%
Nebraska253$209+111%
New York244$99
Louisiana172$168+70%

States with at least 10 priced listings. % is versus the $99 national median.

Replacement cost

What is the Nissan Murano master cylinder replacement cost?

ESTIMATE
Used part
$99
Nissan Murano median asking price
Labor
$145–$450
1.5–3 hours at $95–$150/hr
Estimated total
$245–$550
median used part + labor

Labor is a typical independent-shop range for master cylinder replacement, not a quote for your vehicle; it does not include brake fluid and full system bleed at all four wheels. The part price is the live median from the salvage-yard listings on this page. Full master cylinder replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Nissan Murano Master Cylinder

$

Current avg: $106 — we suggest $90 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2017)

3.5L (6 cylinder)44 listingsInterchange 2015–2022$113$45 – $209
2.5L (4 cylinder, Hybrid)18 listingsInterchange 2016–2017$100$35 – $203

Model-year comparison

What does a Nissan Murano master cylinder cost by year?

$46$84$123$161$20020152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Nissan Murano master cylinder cost?

Asking prices for a used Nissan Murano master cylinder are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 74% premium over grade-C stock, with grade-A medians at $99.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 2.5L (4 cylinder, Hybrid), lists at a $100 median, while 3.5L (6 cylinder) commands $113, a 13% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2018 units carry the lowest median at $51, while 2015 tops the table at $190. Parts from 2015–2023 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 9 compatible years.

Against comparable vehicles, the Nissan Murano sits 60% below the Nissan Titan ($250), 52% above the Ford Mustang ($65), and 55% above the Honda Civic ($64) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used master cylinder: what to check

  1. Inspect rear piston seal for fluid leaks: Check the rear mounting flange for wet fluid leakage that damages power brake booster rubber diaphragms.
  2. Verify reservoir clarity and mounting grommets: Inspect the plastic fluid reservoir for sun-embrittled walls, cracks, or hardened rubber mounting grommets.
  3. Check brake line port thread types: Verify whether hydraulic output ports use metric bubble flares or inverted flare threads before connecting brake lines.
  4. Confirm fluid level sensor plug condition: Check the fluid level float switch connector for corrosion or broken locking tabs to avoid low-fluid dash warnings.
  5. Bench bleed before vehicle installation: Purge trapped air from internal piston chambers using a bench bleed kit before attaching vehicle brake lines.

Keep browsing this vehicle

What other Nissan Murano parts are priced?

Price comparisons

Compare Nissan Murano master cylinder prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Nissan Murano master cylinder FAQ

How much is a used master cylinder for a Nissan Murano?

The median asking price is $99 across 511 priced listings from 98 yards. Grade-A units, the cleanest stock, have a median of $99. 2018 is the cheapest model year we track, with a median of $51.

How much does it cost to replace a Nissan Murano master cylinder?

Using a used part, a Nissan Murano master cylinder replacement typically runs $245–$550 all-in: the median used master cylinder for this model lists at $99, and independent-shop labor for master cylinder replacement typically takes 1.5–3 hours at $95–$150/hr ($145–$450). The labor figure does not include brake fluid and full system bleed at all four wheels. Labor is a national part-level estimate, not a quote for your vehicle.

Which Nissan Murano model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Nissan Murano master cylinder years are interchangeable?

Salvage-yard interchange data links Nissan Murano master cylinder fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Nissan Murano Master Cylinder Cost — From $25 to $337