Used Ram 2500 master cylinder from a salvage yard

Vehicle-specific price guide

How much is a used Ram 2500 master cylinder?

Asking prices from 113 salvage yards in 21 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 18, 2026
Strong coverage837 priced of 950 observed2 variantsMethodology v2.1 →

Part overview

About the Ram 2500 master cylinder

What the master cylinder does, common failure signs, and prices across all vehicles: used master cylinder price guide →

Also known asBrake Master Cylinder
Price summary

A used Ram 2500 master cylinder costs $30 to $328, with a median asking price of $94. Based on 837 priced salvage yard listings across the US, compatible across 2012–2024 (13 model years), updated Oct 18, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$82
Grade B (good)$105
Grade C (fair)$74

Ram 2500 master cylinder price snapshot

USD
Low
$30
Average
$111
High
$328
950 listings observed · 837 priced11d ago· How we price·

Report incorrect price

Reporting price for Ram 2500 Master Cylinder

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$35–$321445 listings
Grade BStandard used$30–$328333 listings
Grade CVisible wear$35–$9816 listings
Grade XUngraded$45–$10043 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $30–$328 overall range

Regional supply

Where the Ram 2500 master cylinder is listed

We found priced Ram 2500 master cylinder listings at 113 salvage yards across 21 states. Arizona supplies the most, with 226 listings (27% of the total) from 8 yards. Location matters: yards in Michigan ask a median $35, while California yards ask $182, 420% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Arizona2268$82-13%
Texas20419$103+10%
California16321$182+94%
Michigan4711$35-63%
Utah405$141+50%
Nevada304$73-22%
Colorado285$101+7%
Idaho284$94

States with at least 10 priced listings. % is versus the $94 national median.

Replacement cost

What is the Ram 2500 master cylinder replacement cost?

ESTIMATE
Used part
$94
Ram 2500 median asking price
Labor
$145–$450
1.5–3 hours at $95–$150/hr
Estimated total
$240–$545
median used part + labor

Labor is a typical independent-shop range for master cylinder replacement, not a quote for your vehicle; it does not include brake fluid and full system bleed at all four wheels. The part price is the live median from the salvage-yard listings on this page. Full master cylinder replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Ram 2500 Master Cylinder

$

Current avg: $111 — we suggest $94 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

hydro-boost41 listingsInterchange 2019–2024$99$35 – $321
vacuum boost40 listingsInterchange 2019–2024$95$45 – $233

Model-year comparison

What does a Ram 2500 master cylinder cost by year?

$55$93$132$170$20920152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Ram 2500 master cylinder cost?

Asking prices for a used Ram 2500 master cylinder are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 11% premium over grade-C stock, with grade-A medians at $82.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, vacuum boost, lists at a $95 median, while hydro-boost commands $99, a 4% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $61, while 2020 tops the table at $199. Parts from 2012–2018 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 7 compatible years.

Against comparable vehicles, the Ram 2500 sits 45% above the Ford Mustang ($65), 47% above the Honda Civic ($64), and 45% above the Mercedes E Class ($65) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used master cylinder: what to check

  1. Inspect rear piston seal for fluid leaks: Check the rear mounting flange for wet fluid leakage that damages power brake booster rubber diaphragms.
  2. Verify reservoir clarity and mounting grommets: Inspect the plastic fluid reservoir for sun-embrittled walls, cracks, or hardened rubber mounting grommets.
  3. Check brake line port thread types: Verify whether hydraulic output ports use metric bubble flares or inverted flare threads before connecting brake lines.
  4. Confirm fluid level sensor plug condition: Check the fluid level float switch connector for corrosion or broken locking tabs to avoid low-fluid dash warnings.
  5. Bench bleed before vehicle installation: Purge trapped air from internal piston chambers using a bench bleed kit before attaching vehicle brake lines.

Keep browsing this vehicle

What other Ram 2500 parts are priced?

Price comparisons

Compare Ram 2500 master cylinder prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Ram 2500 master cylinder FAQ

How much is a used master cylinder for a Ram 2500?

The median asking price is $94 across 837 priced listings from 113 yards. Grade-A units, the cleanest stock, have a median of $82. 2018 is the cheapest model year we track, with a median of $61.

How much does it cost to replace a Ram 2500 master cylinder?

Using a used part, a Ram 2500 master cylinder replacement typically runs $240–$545 all-in: the median used master cylinder for this model lists at $94, and independent-shop labor for master cylinder replacement typically takes 1.5–3 hours at $95–$150/hr ($145–$450). The labor figure does not include brake fluid and full system bleed at all four wheels. Labor is a national part-level estimate, not a quote for your vehicle.

Which Ram 2500 model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Ram 2500 master cylinder years are interchangeable?

Salvage-yard interchange data links Ram 2500 master cylinder fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Ram 2500 Master Cylinder Cost — From $30 to $328