Used Ram 2500 drive shaft from a salvage yard

Vehicle-specific price guide

How much is a used Ram 2500 drive shaft?

Asking prices from 486 salvage yards in 44 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 17, 2026
Strong coverage5,565 priced of 6,402 observed5 variantsMethodology v2.1 →

Part overview

About the Ram 2500 drive shaft

What the drive shaft does, common failure signs, and prices across all vehicles: used drive shaft price guide →

Also known asDriveshaftPropeller ShaftProp Shaft
Price summary

A used Ram 2500 drive shaft costs $70 to $1,248, with a median asking price of $295. Based on 5,565 priced salvage yard listings across the US, compatible across 2012–2026 (15 model years), updated Oct 17, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$320
Grade B (good)$274
Grade C (fair)$220

Ram 2500 drive shaft price snapshot

USD
Low
$70
Average
$392
High
$1,248
6,402 listings observed · 5,565 priced11d ago· How we price·

Report incorrect price

Reporting price for Ram 2500 Drive Shaft

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$70–$1,2483,469 listings
Grade BStandard used$75–$1,2001,532 listings
Grade CVisible wear$99–$800175 listings
Grade XUngraded$75–$1,020389 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $70–$1,248 overall range

Regional supply

Where the Ram 2500 drive shaft is listed

We found priced Ram 2500 drive shaft listings at 486 salvage yards across 44 states. Texas supplies the most, with 914 listings (16% of the total) from 60 yards. Location matters: yards in California ask a median $228, while Illinois yards ask $663, 191% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas91460$265-10%
Michigan69246$310+5%
Illinois41325$663+125%
California34633$228-23%
Wisconsin33518$293-1%
Missouri30420$314+6%
North Carolina20412$350+19%
Colorado1818$233-21%

States with at least 10 priced listings. % is versus the $295 national median.

Replacement cost

What is the Ram 2500 drive shaft replacement cost?

ESTIMATE
Used part
$295
Ram 2500 median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$390–$745
median used part + labor

Labor is a typical independent-shop range for drive shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. Full drive shaft replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Ram 2500 Drive Shaft

$

Current avg: $392 — we suggest $333 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

4x4, 1 piece drive shaft, gasoline, Crew Cab (4 Dr)48 listingsInterchange 2019–2024$301$185 – $625
4x4, 1 piece drive shaft, diesel, Crew Cab (4 Dr)30 listingsInterchange 2025–2026$345$200 – $462
4x4, 2 piece drive shaft, diesel5 listingsInterchange 2025–2026$353$350 – $587

4x4, 2 piece drive shaft, gasoline

2 listings
$425$250 – $425

4x2, Crew Cab (4 Dr), 8' box, diesel

1 listings
$271$271 – $271

Model-year comparison

What does a Ram 2500 drive shaft cost by year?

$233$265$297$328$3602015201620172018201920202021202220232025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Ram 2500 drive shaft cost?

Asking prices for a used Ram 2500 drive shaft are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 45% premium over grade-C stock, with grade-A medians at $320.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 4x2, Crew Cab (4 Dr), 8' box, diesel, lists at a $271 median, while 4x4, 2 piece drive shaft, gasoline commands $425, a 57% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2017 units carry the lowest median at $259, while 2019 tops the table at $343. Parts from 2012–2018 are interchangeable, so if the 2017 fits your vehicle, it offers the best value across 7 compatible years.

Against comparable vehicles, the Ram 2500 sits 55% above the Ram 1500 ($190), 29% above the Chevy Silverado 1500 ($228), and 21% above the GMC Sierra 1500 ($243) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used drive shaft: what to check

  1. Flex universal joints and CV boots: Articulate each U-joint by hand to check for stiff binding, rusted needle bearings, or torn rubber constant-velocity boots.
  2. Inspect slip yoke splines and balance weights: Check male splines for twisting or galling, and verify that welded steel balance weights are present along the tube.
  3. Examine center carrier bearing rubber: Inspect two-piece driveshaft center bearings for cracked rubber mounting rings or noisy, dry support bearings.
  4. Measure overall compressed length: Verify flange-to-flange operating length exactly, as transmission options and wheelbase variations alter shaft dimensions.
  5. Index flange alignment before installation: Mark mating yokes to the differential flange before installation to prevent high-speed driveline vibration.

Keep browsing this vehicle

What other Ram 2500 parts are priced?

Price comparisons

Compare Ram 2500 drive shaft prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Ram 2500 drive shaft FAQ

How much is a used drive shaft for a Ram 2500?

The median asking price is $295 across 5,565 priced listings from 486 yards. Grade-A units, the cleanest stock, have a median of $320. 2017 is the cheapest model year we track, with a median of $259.

How much does it cost to replace a Ram 2500 drive shaft?

Using a used part, a Ram 2500 drive shaft replacement typically runs $390–$745 all-in: the median used drive shaft for this model lists at $295, and independent-shop labor for drive shaft replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). Labor is a national part-level estimate, not a quote for your vehicle.

Which Ram 2500 model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Ram 2500 drive shaft years are interchangeable?

Salvage-yard interchange data links Ram 2500 drive shaft fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 15 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Ram 2500 Drive Shaft Cost — From $70 to $1,248