Used Nissan Murano steering column from a salvage yard

Vehicle-specific price guide

How much is a used Nissan Murano steering column?

Asking prices from 379 salvage yards in 43 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 20, 2026
Strong coverage1,083 priced of 1,264 observed4 variantsMethodology v2.1 →

Part overview

About the Nissan Murano steering column

What the steering column does, common failure signs, and prices across all vehicles: used steering column price guide →

Price summary

A used Nissan Murano steering column costs $60 to $500, with a median asking price of $175. Based on 1,083 priced salvage yard listings across the US, compatible across 2013–2025 (13 model years), updated Oct 20, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$185
Grade B (good)$153
Grade C (fair)$90

Nissan Murano steering column price snapshot

USD
Low
$60
Average
$184
High
$500
1,264 listings observed · 1,083 priced11d ago· How we price·

Report incorrect price

Reporting price for Nissan Murano Steering Column

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$60–$500742 listings
Grade BStandard used$65–$435318 listings
Grade CVisible wear$86–$1514 listings
Grade XUngraded$75–$29519 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $60–$500 overall range

Regional supply

Where the Nissan Murano steering column is listed

We found priced Nissan Murano steering column listings at 379 salvage yards across 43 states. Texas supplies the most, with 269 listings (17% of the total) from 39 yards. Location matters: yards in California ask a median $100, while Oklahoma yards ask $238, 138% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas26939$190+9%
Florida22227$201+15%
Illinois17320$125-29%
California6423$100-43%
New York6220$150-14%
Indiana6010$150-14%
Missouri607$155-11%
Oklahoma595$238+36%

States with at least 10 priced listings. % is versus the $175 national median.

Replacement cost

What is the Nissan Murano steering column replacement cost?

ESTIMATE
Used part
$175
Nissan Murano median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$365–$925
median used part + labor

Labor is a typical independent-shop range for steering column replacement, not a quote for your vehicle; it does not include steering wheel and dashboard panel removal and reassembly. The part price is the live median from the salvage-yard listings on this page. Full steering column replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Nissan Murano Steering Column

$

Current avg: $184 — we suggest $156 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

(floor shift), manual tilt and telescopic, Canada market, w/o rain sensor

4 listings
$342$215 – $384
(floor shift), power tilt and telescopic1 listings$250$250 – $250

Model-year comparison

What does a Nissan Murano steering column cost by year?

$113$150$188$225$26320152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Nissan Murano steering column cost?

Asking prices for a used Nissan Murano steering column are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 106% premium over grade-C stock, with grade-A medians at $185.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (floor shift), manual tilt and telescopic, US market, w/o rain sensor, lists at a $180 median, while (floor shift), manual tilt and telescopic, US market, rain sensor commands $375, a 108% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $125, while 2025 tops the table at $250. Parts from 2013–2020 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 8 compatible years.

Against comparable vehicles, the Nissan Murano sits 21% above the Subaru Impreza ($145), 40% above the Subaru Outback ($125), and 21% above the Honda Civic ($145) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used steering column: what to check

  1. Inspect intermediate shaft u-joint splines: Check lower universal joints for play, binding, or stripped pinch-bolt splines where the column meets the rack.
  2. Verify electric power steering motor inclusion: Ask if columns with integrated electric assist include the assist motor, reduction gear, and module assembly.
  3. Check tilt and telescoping locking lever: Test manual tilt and telescoping levers to ensure column lock shoes clamp tightly without slipping under load.
  4. Confirm ignition switch and clockspring wiring: Match multi-function switch stalk plugs, clockspring connectors, and key tumbler housings to your vehicle.
  5. Lock steering wheel straight before installation: Lock steering wheel alignment straight before installation to prevent over-rotating and snapping internal clockspring wires.

Keep browsing this vehicle

What other Nissan Murano parts are priced?

Price comparisons

Compare Nissan Murano steering column prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Nissan Murano steering column FAQ

How much is a used steering column for a Nissan Murano?

The median asking price is $175 across 1,083 priced listings from 379 yards. Grade-A units, the cleanest stock, have a median of $185. 2017 is the cheapest model year we track, with a median of $125.

How much does it cost to replace a Nissan Murano steering column?

Using a used part, a Nissan Murano steering column replacement typically runs $365–$925 all-in: the median used steering column for this model lists at $175, and independent-shop labor for steering column replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include steering wheel and dashboard panel removal and reassembly. Labor is a national part-level estimate, not a quote for your vehicle.

Which Nissan Murano model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Nissan Murano steering column years are interchangeable?

Salvage-yard interchange data links Nissan Murano steering column fitments across 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Nissan Murano Steering Column Cost — From $60 to $500