Used Chrysler 300 throttle body from a salvage yard

Vehicle-specific price guide

How much is a used Chrysler 300 throttle body?

Asking prices from 70 salvage yards in 23 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 30, 2026
Strong coverage489 priced of 950 observed3 variantsMethodology v2.1 →

Part overview

About the Chrysler 300 throttle body

What the throttle body does, common failure signs, and prices across all vehicles: used throttle body price guide →

Also known asThrottle Body AssemblyElectronic Throttle Body
Price summary

A used Chrysler 300 throttle body costs $46 to $175, with a median asking price of $78. Based on 489 priced salvage yard listings across the US, compatible across 2011–2022 (12 model years), updated Oct 30, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$78
Grade B (good)$78
Grade C (fair)$63

Chrysler 300 throttle body price snapshot

USD
Low
$46
Average
$98
High
$175
950 listings observed · 489 pricedUpdated 14h ago· How we price·

Report incorrect price

Reporting price for Chrysler 300 Throttle Body

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$46–$175288 listings
Grade BStandard used$75–$17586 listings
Grade CVisible wear$63–$7519 listings
Grade XUngraded$46–$7596 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $46–$175 overall range

Regional supply

Where the Chrysler 300 throttle body is listed

We found priced Chrysler 300 throttle body listings at 70 salvage yards across 23 states. New Jersey supplies the most, with 450 listings (15% of the total) from 1 yard. Location matters: yards in New Jersey ask a median $41, while Nebraska yards ask $160, 290% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
New Jersey4501$41-47%
Florida4164$93+19%
Illinois3317$78
New Mexico2153$71-9%
Texas1913$125+60%
Indiana1185$55-29%
Pennsylvania1002$78
Nebraska942$160+105%

States with at least 10 priced listings. % is versus the $78 national median.

Replacement cost

What is the Chrysler 300 throttle body replacement cost?

ESTIMATE
Used part
$78
Chrysler 300 median asking price
Labor
$50–$225
0.5–1.5 hours at $95–$150/hr
Estimated total
$130–$305
median used part + labor

Labor is a typical independent-shop range for throttle body replacement, not a quote for your vehicle; it does not include throttle body relearn procedure after installation. The part price is the live median from the salvage-yard listings on this page. Full throttle body replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chrysler 300 Throttle Body

$

Current avg: $98 — we suggest $83 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2023)

(throttle valve assembly), 5.7L33 listingsInterchange 2013–2022$75$46 – $175
(throttle valve assembly), 6.4L33 listingsInterchange 2013–2022$75$46 – $175
(throttle valve assembly), 3.6L19 listingsInterchange 2011–2021$78$75 – $175

Model-year comparison

What does a Chrysler 300 throttle body cost by year?

$68$71$75$78$82201520162017201820192020202120222023
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chrysler 300 throttle body cost?

Asking prices for a used Chrysler 300 throttle body are unusually spread out: the top listing asks about 4 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 24% premium over grade-C stock, with grade-A medians at $78.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (throttle valve assembly), 5.7L, lists at a $75 median, while (throttle valve assembly), 3.6L commands $78, a 4% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2023 units carry the lowest median at $75, while 2015 tops the table at $78. Parts from 2011–2022 are interchangeable, so if the 2023 fits your vehicle, it offers the best value across 12 compatible years.

Against comparable vehicles, the Chrysler 300 sits 35% below the Mercedes S Class ($120), 22% below the Mercedes GLE Class ($100), and 14% below the Mercedes E Class ($91) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used throttle body: what to check

  1. Inspect bore and butterfly blade for carbon: Check the throttle plate for heavy carbon varnish or sticky shaft movement that causes rough engine idle.
  2. Verify electric actuator plug pins: Check electronic throttle actuator plug pins for corrosion, bent spades, or cracked plastic connector shrouds.
  3. Check butterfly shaft play and spring return: Wiggle the throttle shaft to check for worn bronze bushings or weak return springs on cable-operated units.
  4. Confirm vacuum nipples and coolant heating tubes: Check metal vacuum nipples and coolant heating passage tubes for corrosion, clogging, or breakage.
  5. Perform idle relearn procedure after install: Run an electronic throttle position calibration scan tool routine to clear high-idle fault codes.

Keep browsing this vehicle

What other Chrysler 300 parts are priced?

Price comparisons

Compare Chrysler 300 throttle body prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chrysler 300 throttle body FAQ

How much is a used throttle body for a Chrysler 300?

The median asking price is $78 across 489 priced listings from 70 yards. Grade-A units, the cleanest stock, have a median of $78. 2023 is the cheapest model year we track, with a median of $75.

How much does it cost to replace a Chrysler 300 throttle body?

Using a used part, a Chrysler 300 throttle body replacement typically runs $130–$305 all-in: the median used throttle body for this model lists at $78, and independent-shop labor for throttle body replacement typically takes 0.5–1.5 hours at $95–$150/hr ($50–$225). The labor figure does not include throttle body relearn procedure after installation. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chrysler 300 model years does this price guide cover?

This guide currently has year-level pricing for 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chrysler 300 throttle body years are interchangeable?

Salvage-yard interchange data links Chrysler 300 throttle body fitments across 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chrysler 300 Throttle Body Cost — From $46 to $175