Chrysler Pacifica axle shaft price snapshot
- Low
- $40
- Average
- $154
- High
- $594
Vehicle-specific price guide
How much is a used Chrysler Pacifica axle shaft?
Asking prices from 265 salvage yards in 36 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 22, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Chrysler Pacifica axle shaft
What the axle shaft does, common failure signs, and prices across all vehicles: used axle shaft price guide →
Also known asCV AxleCV ShaftDrive AxleHalf ShaftAxle AssemblyCovers front CV axles and rear axle shafts.
Price summary
A used Chrysler Pacifica axle shaft costs $40 to $594, with a median asking price of $136. Based on 2,072 priced salvage yard listings across the US, compatible across 2007–2025 (19 model years), updated Sep 22, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$136
Grade B (good)$144
Grade C (fair)$85
USD
Condition comparison
Price by part grade
Grade AClean / low wear$40–$594978 listings
Grade BStandard used$50–$327972 listings
Grade CVisible wear$80–$1508 listings
Grade XUngraded$50–$460114 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $40–$594 | 978 | |
| Grade BStandard used | $50–$327 | 972 | |
| Grade CVisible wear | $80–$150 | 8 | |
| Grade XUngraded | $50–$460 | 114 |
Median by grade
Grade price comparison
Grade A$136
Grade B$144
Grade C$85
Ungraded$80
Median asking price by seller-reported condition grade · $40–$594 overall range
Regional supply
Where the Chrysler Pacifica axle shaft is listed
We found priced Chrysler Pacifica axle shaft listings at 265 salvage yards across 36 states. Florida supplies the most, with 509 listings (25% of the total) from 32 yards. Location matters: yards in Arizona ask a median $99, while Missouri yards ask $193, 95% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Florida | 509 | 32 | $160+18% |
| Texas | 216 | 32 | $166+22% |
| Arizona | 186 | 11 | $99-27% |
| California | 184 | 21 | $111-18% |
| Georgia | 105 | 9 | $171+26% |
| Missouri | 95 | 12 | $193+42% |
| North Carolina | 84 | 7 | $192+41% |
| Virginia | 60 | 8 | $100-26% |
States with at least 10 priced listings. % is versus the $136 national median.
Replacement cost
What is the Chrysler Pacifica axle shaft replacement cost?
- Used part
- $136
- Chrysler Pacifica median asking price
- Labor
- $95–$375
- 1–2.5 hours at $95–$150/hr
- Estimated total
- $230–$510
- median used part + labor
Labor is a typical independent-shop range for axle shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Chrysler Pacifica axle shaft cost by year?
2025139 listingsFits 9 years$174$40 – $3112024350 listingsFits 9 years$161$64 – $3112023138 listingsFits 8 years$175$63 – $3112022341 listingsFits 9 years$101$40 – $5942021350 listingsFits 9 years$147$40 – $3112020350 listingsFits 9 years$158$40 – $3112019200 listingsFits 7 years$152$40 – $2902018200 listingsFits 8 years$101$40 – $3272017400 listingsFits 12 years$150$50 – $467
Market analysis
How much does a used Chrysler Pacifica axle shaft cost?
Asking prices for a used Chrysler Pacifica axle shaft are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 60% premium over grade-C stock, with grade-A medians at $136.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, front, gasoline, RH, FWD, lists at a $110 median, while rear, RH commands $260, a 136% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2018 units carry the lowest median at $101, while 2023 tops the table at $175. Parts from 2017–2025 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 8 compatible years.
Against comparable vehicles, the Chrysler Pacifica sits 53% below the Mercedes GLE Class ($287), 32% below the Mercedes C Class ($201), and 35% below the Mercedes E Class ($209) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used axle shaft: what to check
- Inspect CV boots for cracks. A torn boot means the joint has likely ingested grit.
- Confirm ABS ring compatibility with your sensor setup.
- Left and right shafts usually differ in length, so verify the side.
- Spin the joints through full articulation and listen for clicking.
Keep browsing this vehicle
What other Chrysler Pacifica parts are priced?
01wide ±224%
Transmission Control Module
$116median
$25$545
02wide ±175%
Side Mirror
$232median
$50$860
03wide ±137%
Front Seat
$175median
$50$528
04wide ±184%
Car Radio
$190median
$49$750
05wide ±148%
Strut
$96median
$36$320
06wide ±285%
Air Bag
$143median
$35$850
07wide ±125%
Headlight Assembly
$424median
$110$1,170
08wide ±163%
Wheels
$192median
$45$670
09wide ±249%
Tail Light
$150median
$25$773
10wide ±154%
Rear Bumper Assembly
$482median
$125$1,606
11wide ±146%
Grille
$167median
$38$524
12wide ±118%
Center Console
$146median
$49$394
Price comparisons
Compare Chrysler Pacifica axle shaft prices
Axle Shaftcompare
MercedesGLEClassvsChryslerPacifica
Class$287
Pacifica$136
$151 diff12,863 listings
Axle ShaftcompareMercedesCClassvsChryslerPacifica
Class$201
Pacifica$136
$65 diff11,584 listings
Axle ShaftcompareMercedesEClassvsChryslerPacifica
Class$209
Pacifica$136
$73 diff10,907 listings
Axle ShaftcompareJeepCherokeevsChryslerPacifica
Cherokee$96
Pacifica$136
$40 diff10,225 listings
Axle ShaftcompareHyundaiSantaFevsChryslerPacifica
Fe$137
Pacifica$136
$1 diff9,952 listings
Axle ShaftcompareJeepGrandCherokeevsChryslerPacifica
Cherokee$151
Pacifica$136
$15 diff9,580 listings
Compare fitments
What do similar vehicles charge for this part?
BMWwide ±278%
BMW X3
$200median
$34$1,144
BMWwide ±174%
BMW X5
$226median
$40$825
Chevywide ±168%
Chevy Equinox
$136median
$35$493
Chevywide ±193%
Chevy Malibu
$100median
$30$415
Chevywide ±132%
Chevy Silverado 1500
$160median
$45$468
Chevywide ±143%
Chevy Tahoe
$155median
$50$493
Chevywide ±154%
Chevy Traverse
$137median
$40$462
Dodgewide ±237%
Dodge Challenger
$190median
$35$937
Dodgewide ±252%
Dodge Charger
$155median
$30$812
Dodgewide ±230%
Dodge Durango
$126median
$30$609
Fordwide ±162%
Ford Edge
$120median
$35$423
Fordwide ±158%
Ford Escape
$126median
$25$423
Common questions
Chrysler Pacifica axle shaft FAQ
How much is a used axle shaft for a Chrysler Pacifica?
The median asking price is $136 across 2,072 priced listings from 265 yards. Grade-A units, the cleanest stock, have a median of $136. 2022 is the cheapest model year we track, with a median of $101.
How much does it cost to replace a Chrysler Pacifica axle shaft?
Using a used part, a Chrysler Pacifica axle shaft replacement typically runs $230–$510 all-in: the median used axle shaft for this model lists at $136, and independent-shop labor for axle shaft replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). Labor is a national part-level estimate, not a quote for your vehicle.
Which Chrysler Pacifica model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Chrysler Pacifica axle shaft years are interchangeable?
Salvage-yard interchange data links Chrysler Pacifica axle shaft fitments across 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 19 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.