Vehicle-specific price guide

How much is a used Chevy Camaro rear bumper assembly?

Asking prices from 407 salvage yards in 43 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 27, 2026
Strong coverage2,678 priced of 3,274 observed11 variantsMethodology v2.1 →

Part overview

About the Chevy Camaro rear bumper assembly

What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →

Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary

A used Chevy Camaro rear bumper assembly costs $140 to $1,600, with a median asking price of $620. Based on 2,678 priced salvage yard listings across the US, compatible across 2016–2024 (9 model years), updated Oct 27, 2026. Prices exclude shipping, core charges, and installation.

Chevy Camaro rear bumper assembly price snapshot

USD
Low
$140
Average
$628
High
$1,600
3,274 listings observed · 2,678 pricedUpdated 1d ago· How we price·

Report incorrect price

Reporting price for Chevy Camaro Rear Bumper Assembly

Reason

Regional supply

Where the Chevy Camaro rear bumper assembly is listed

We found priced Chevy Camaro rear bumper assembly listings at 407 salvage yards across 43 states. California supplies the most, with 1,105 listings (17% of the total) from 29 yards. Location matters: yards in Michigan ask a median $503, while Illinois yards ask $799, 59% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California1,10529$575-7%
Florida64527$620
Texas58535$585-6%
Missouri43827$675+9%
Michigan35630$503-19%
Georgia34613$605-2%
North Carolina27023$624+1%
Illinois22913$799+29%

States with at least 10 priced listings. % is versus the $620 national median.

Replacement cost

What is the Chevy Camaro rear bumper assembly replacement cost?

ESTIMATE
Used part
$620
Chevy Camaro median asking price
Labor
$95–$375
1–2.5 hours at $95–$150/hr
Estimated total
$715–$995
median used part + labor

Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Camaro Rear Bumper Assembly

$

Current avg: $628 — we suggest $534 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2024)

LT, park assist, 4 round exhaust outlets (opt NPP)43 listingsInterchange 2019–2024$454$148 – $1,399
LT, w/o park assist; 2 round exhaust outlets (opt N10)43 listingsInterchange 2019–2023$669$150 – $941
LT1, 2 round exhaust outlets (opt N10)43 listingsInterchange 2019–2023$669$150 – $941
SS, park assist, 4 round exhaust outlets (opt NPP)43 listingsInterchange 2019–2024$454$148 – $1,399
SS, w/o park assist; 2 round exhaust outlets (opt N10)43 listingsInterchange 2019–2023$669$150 – $941
LT, park assist, 2 round exhaust outlets (opt N10)39 listingsInterchange 2019–2024$620$300 – $1,100
SS, park assist, 2 round exhaust outlets (opt N10)39 listingsInterchange 2019–2024$620$300 – $1,100
LT, w/o park assist; 4 round exhaust outlets (opt NPP)36 listingsInterchange 2019–2024$650$150 – $1,090
LT1, 4 round exhaust outlets (opt NPP)36 listingsInterchange 2019–2024$650$150 – $1,090
SS, w/o park assist; 4 round exhaust outlets (opt NPP)36 listingsInterchange 2019–2024$650$150 – $1,090
ZL120 listingsInterchange 2019–2024$830$250 – $1,600

Model-year comparison

What does a Chevy Camaro rear bumper assembly cost by year?

$512$555$597$640$683201820192020202220232024
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Camaro rear bumper assembly cost?

Asking prices for a used Chevy Camaro rear bumper assembly are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, LT, park assist, 4 round exhaust outlets (opt NPP), lists at a $454 median, while ZL1 commands $830, a 83% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2018 units carry the lowest median at $569, while 2022 tops the table at $650. Parts from 2016–2018 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 3 compatible years.

Against comparable vehicles, the Chevy Camaro sits 25% above the Ram 1500 ($497), 23% above the Dodge Durango ($505), and 25% above the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used rear bumper assembly: what to check

  1. Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
  2. Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
  3. Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
  4. Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
  5. Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.

Keep browsing this vehicle

What other Chevy Camaro parts are priced?

Price comparisons

Compare Chevy Camaro rear bumper assembly prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Camaro rear bumper assembly FAQ

How much is a used rear bumper assembly for a Chevy Camaro?

The median asking price is $620 across 2,678 priced listings from 407 yards. 2018 is the cheapest model year we track, with a median of $569.

How much does it cost to replace a Chevy Camaro rear bumper assembly?

Using a used part, a Chevy Camaro rear bumper assembly replacement typically runs $715–$995 all-in: the median used rear bumper assembly for this model lists at $620, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Camaro model years does this price guide cover?

This guide currently has year-level pricing for 2024, 2023, 2022, 2020, 2019, 2018. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Camaro rear bumper assembly years are interchangeable?

Salvage-yard interchange data links Chevy Camaro rear bumper assembly fitments across 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024. Searching all 9 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Camaro Rear Bumper Assembly Cost — From $140 to $1,600