Vehicle-specific price guide

How much is a used Chevy Silverado 1500 rear bumper assembly?

Asking prices from 415 salvage yards in 39 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 24, 2026
Strong coverage2,788 priced of 3,558 observed11 variantsMethodology v2.1 →

Part overview

About the Chevy Silverado 1500 rear bumper assembly

What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →

Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary

A used Chevy Silverado 1500 rear bumper assembly costs $170 to $1,695, with a median asking price of $675. Based on 2,788 priced salvage yard listings across the US, compatible across 2014–2026 (13 model years), updated Sep 24, 2026. Prices exclude shipping, core charges, and installation.

Chevy Silverado 1500 rear bumper assembly price snapshot

USD
Low
$170
Average
$669
High
$1,695
3,558 listings observed · 2,788 priced1mo ago· How we price·

Report incorrect price

Reporting price for Chevy Silverado 1500 Rear Bumper Assembly

Reason

Regional supply

Where the Chevy Silverado 1500 rear bumper assembly is listed

We found priced Chevy Silverado 1500 rear bumper assembly listings at 415 salvage yards across 39 states. Florida supplies the most, with 695 listings (24% of the total) from 57 yards. Location matters: yards in Florida ask a median $522, while Colorado yards ask $802, 54% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Florida69557$522-23%
California64779$620-8%
Indiana24012$800+19%
Texas20946$575-15%
North Carolina12324$725+7%
Michigan11822$746+11%
Colorado1177$802+19%
Georgia10127$761+13%

States with at least 10 priced listings. % is versus the $675 national median.

Replacement cost

What is the Chevy Silverado 1500 rear bumper assembly replacement cost?

ESTIMATE
Used part
$675
Chevy Silverado 1500 median asking price
Labor
$95–$375
1–2.5 hours at $95–$150/hr
Estimated total
$770–$1,050
median used part + labor

Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Silverado 1500 Rear Bumper Assembly

$

Current avg: $669 — we suggest $569 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

dual exhaust (opt N10), exhaust in bumper, automatic lane change (opt UKL)50 listingsInterchange 2022–2026$906$745 – $1,294
single exhaust (opt NB5), park assist (side obstacle detection), chrome50 listingsInterchange 2019–2025$676$300 – $1,174
single exhaust (opt NB5), park assist (side obstacle detection), painted50 listingsInterchange 2019–2026$740$640 – $952
dual exhaust (opt N10), exhaust below bumper, w/o tow hooks36 listingsInterchange 2023–2026$900$175 – $1,305
dual exhaust (opt N10), exhaust below bumper, tow hooks (AEV edition)11 listingsInterchange 2024–2025$330$250 – $1,250

Model-year comparison

What does a Chevy Silverado 1500 rear bumper assembly cost by year?

$315$431$548$664$78020152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Silverado 1500 rear bumper assembly cost?

Asking prices for a used Chevy Silverado 1500 rear bumper assembly are unusually spread out: the top listing asks about 10 times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, dual exhaust (opt N10), exhaust below bumper, tow hooks (AEV edition), lists at a $330 median, while dual exhaust (opt N10), exhaust in bumper, w/o automatic lane change; park assist (side obstacle detection), painted commands $950, a 188% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2018 units carry the lowest median at $350, while 2022 tops the table at $743. Parts from 2014–2019 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 6 compatible years.

Against comparable vehicles, the Chevy Silverado 1500 sits 36% above the Ram 1500 ($497), 34% above the Dodge Durango ($505), and 36% above the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used rear bumper assembly: what to check

  1. Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
  2. Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
  3. Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
  4. Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
  5. Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.

Keep browsing this vehicle

What other Chevy Silverado 1500 parts are priced?

Price comparisons

Compare Chevy Silverado 1500 rear bumper assembly prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Silverado 1500 rear bumper assembly FAQ

How much is a used rear bumper assembly for a Chevy Silverado 1500?

The median asking price is $675 across 2,788 priced listings from 415 yards. 2018 is the cheapest model year we track, with a median of $350.

How much does it cost to replace a Chevy Silverado 1500 rear bumper assembly?

Using a used part, a Chevy Silverado 1500 rear bumper assembly replacement typically runs $770–$1,050 all-in: the median used rear bumper assembly for this model lists at $675, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Silverado 1500 model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Silverado 1500 rear bumper assembly years are interchangeable?

Salvage-yard interchange data links Chevy Silverado 1500 rear bumper assembly fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Silverado 1500 Rear Bumper Assembly Cost — From $170 to $1,695