Vehicle-specific price guide

How much is a used Chevy Trax rear bumper assembly?

Asking prices from 553 salvage yards in 40 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 23, 2026
Strong coverage2,520 priced of 3,042 observed12 variantsMethodology v2.1 →

Part overview

About the Chevy Trax rear bumper assembly

What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →

Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary

A used Chevy Trax rear bumper assembly costs $100 to $1,655, with a median asking price of $501. Based on 2,520 priced salvage yard listings across the US, compatible across 2015–2026 (11 model years), updated Sep 23, 2026. Prices exclude shipping, core charges, and installation.

Chevy Trax rear bumper assembly price snapshot

USD
Low
$100
Average
$573
High
$1,655
3,042 listings observed · 2,520 priced1mo ago· How we price·

Report incorrect price

Reporting price for Chevy Trax Rear Bumper Assembly

Reason

Regional supply

Where the Chevy Trax rear bumper assembly is listed

We found priced Chevy Trax rear bumper assembly listings at 553 salvage yards across 40 states. Texas supplies the most, with 420 listings (17% of the total) from 66 yards. Location matters: yards in Indiana ask a median $350, while Florida yards ask $786, 125% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas42066$464-7%
California31543$549+10%
Michigan19246$375-25%
Illinois19036$400-20%
Florida14926$786+57%
Ohio11634$623+24%
Indiana11525$350-30%
North Carolina8824$747+49%

States with at least 10 priced listings. % is versus the $501 national median.

Replacement cost

What is the Chevy Trax rear bumper assembly replacement cost?

ESTIMATE
Used part
$501
Chevy Trax median asking price
Labor
$95–$375
1–2.5 hours at $95–$150/hr
Estimated total
$595–$875
median used part + labor

Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Trax Rear Bumper Assembly

$

Current avg: $573 — we suggest $487 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

LS, park assist (opt UD7)50 listingsInterchange 2024–2025$676$350 – $1,106
LT, park assist (opt UD7), w/o keyless entry49 listingsInterchange 2024–2025$924$350 – $1,655
RS, park assist (opt UD7), w/o keyless entry49 listingsInterchange 2024–2025$924$350 – $1,655
LT, park assist (opt UD7), keyless entry (opt AVJ)48 listingsInterchange 2024–2025$750$400 – $1,250
RS, park assist (opt UD7), keyless entry (opt AVJ)48 listingsInterchange 2024–2025$750$400 – $1,250
ACTIV, park assist (opt UD7)47 listingsInterchange 2024–2025$900$350 – $1,275
LS, w/o park assist47 listingsInterchange 2024–2025$700$300 – $1,235
LT, w/o park assist; keyless entry (opt AVJ)46 listingsInterchange 2024–2025$855$550 – $1,410
RS, w/o park assist; keyless entry (opt AVJ)46 listingsInterchange 2024–2025$855$550 – $1,410
LT, w/o park assist; w/o keyless entry45 listingsInterchange 2024–2025$1,004$595 – $1,303
RS, w/o park assist; w/o keyless entry45 listingsInterchange 2024–2025$1,004$595 – $1,303
ACTIV, w/o park assist43 listingsInterchange 2024–2025$732$350 – $1,197

Model-year comparison

What does a Chevy Trax rear bumper assembly cost by year?

$270$426$581$737$8932015201620172018201920202021202220242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Trax rear bumper assembly cost?

Asking prices for a used Chevy Trax rear bumper assembly are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, LS, park assist (opt UD7), lists at a $676 median, while RS, w/o park assist; w/o keyless entry commands $1,004, a 49% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $300, while 2025 tops the table at $850. Parts from 2015–2016 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 2 compatible years.

Against comparable vehicles, the Chevy Trax sits 1% above the Ram 1500 ($497), 1% below the Dodge Durango ($505), and 1% above the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used rear bumper assembly: what to check

  1. Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
  2. Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
  3. Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
  4. Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
  5. Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.

Keep browsing this vehicle

What other Chevy Trax parts are priced?

Price comparisons

Compare Chevy Trax rear bumper assembly prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Trax rear bumper assembly FAQ

How much is a used rear bumper assembly for a Chevy Trax?

The median asking price is $501 across 2,520 priced listings from 553 yards. 2015 is the cheapest model year we track, with a median of $300.

How much does it cost to replace a Chevy Trax rear bumper assembly?

Using a used part, a Chevy Trax rear bumper assembly replacement typically runs $595–$875 all-in: the median used rear bumper assembly for this model lists at $501, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Trax model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Trax rear bumper assembly years are interchangeable?

Salvage-yard interchange data links Chevy Trax rear bumper assembly fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2024, 2025, 2026. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Trax Rear Bumper Assembly Cost — From $100 to $1,655