Vehicle-specific price guide

How much is a used Chevy Malibu rear bumper assembly?

Asking prices from 587 salvage yards in 45 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026
Strong coverage1,670 priced of 2,236 observed5 variantsMethodology v2.1 →

Part overview

About the Chevy Malibu rear bumper assembly

What the rear bumper assembly does, common failure signs, and prices across all vehicles: used rear bumper assembly price guide →

Also known asRear Bumper CompleteRear Bumper with Reinforcement
Price summary

A used Chevy Malibu rear bumper assembly costs $119 to $919, with a median asking price of $434. Based on 1,670 priced salvage yard listings across the US, compatible across 2013–2025 (13 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.

Chevy Malibu rear bumper assembly price snapshot

USD
Low
$119
Average
$452
High
$919
2,236 listings observed · 1,670 priced10d ago· How we price·

Report incorrect price

Reporting price for Chevy Malibu Rear Bumper Assembly

Reason

Regional supply

Where the Chevy Malibu rear bumper assembly is listed

We found priced Chevy Malibu rear bumper assembly listings at 587 salvage yards across 45 states. California supplies the most, with 326 listings (14% of the total) from 72 yards. Location matters: yards in Florida ask a median $355, while Texas yards ask $530, 49% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California32672$365-16%
Florida32161$355-18%
Texas25554$530+22%
Illinois25332$400-8%
Michigan18956$481+11%
Indiana12322$400-8%
Georgia12026$409-6%
Ohio10025$480+11%

States with at least 10 priced listings. % is versus the $434 national median.

Replacement cost

What is the Chevy Malibu rear bumper assembly replacement cost?

ESTIMATE
Used part
$434
Chevy Malibu median asking price
Labor
$95–$375
1–2.5 hours at $95–$150/hr
Estimated total
$530–$810
median used part + labor

Labor is a typical independent-shop range for rear bumper assembly replacement, not a quote for your vehicle; it does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Malibu Rear Bumper Assembly

$

Current avg: $452 — we suggest $384 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

w/o park assist; concealed exhaust28 listingsInterchange 2019–2023$400$250 – $562
park assist, automatic park (opt UFQ)19 listingsInterchange 2019–2025$712$500 – $900
park assist, w/o automatic park; concealed exhaust9 listingsInterchange 2019–2024$450$367 – $735
park assist, w/o automatic park; exhaust in bumper9 listingsInterchange 2019–2024$449$125 – $727
w/o park assist; exhaust in bumper8 listingsInterchange 2020–2023$417$375 – $507

Model-year comparison

What does a Chevy Malibu rear bumper assembly cost by year?

$221$316$412$508$60420152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Malibu rear bumper assembly cost?

Asking prices for a used Chevy Malibu rear bumper assembly are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, w/o park assist; concealed exhaust, lists at a $400 median, while park assist, automatic park (opt UFQ) commands $712, a 78% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $245, while 2024 tops the table at $575. Parts from 2013–2016 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 4 compatible years.

Against comparable vehicles, the Chevy Malibu sits 13% below the Ram 1500 ($497), 14% below the Dodge Durango ($505), and 12% below the Jeep Grand Cherokee ($495) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used rear bumper assembly: what to check

  1. Inspect internal reinforcement bar structure: Examine the inner metal crash bar for buckled steel, crushed crumple brackets, or hidden impact cracks behind the plastic shell.
  2. Verify sensor and blind-spot cutout options: Ensure the cover features the exact parking sensor hole count and internal blind-spot radar bracket mounts required by your trim.
  3. Check outer mounting tabs and guide slots: Broken fender-side attachment eyelets or torn diffuser clips will cause sagging body lines and uneven bumper gaps.
  4. Ask about intact wiring harness inclusion: Buying an assembly with the factory license plate light wiring and rear sensor harness intact saves tedious splicing time.
  5. Match exhaust tip cutout geometry: Single-outlet and dual-outlet bumper cutouts differ between engine options, so verify your tailpipe configuration before buying.

Keep browsing this vehicle

What other Chevy Malibu parts are priced?

Price comparisons

Compare Chevy Malibu rear bumper assembly prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Malibu rear bumper assembly FAQ

How much is a used rear bumper assembly for a Chevy Malibu?

The median asking price is $434 across 1,670 priced listings from 587 yards. 2015 is the cheapest model year we track, with a median of $245.

How much does it cost to replace a Chevy Malibu rear bumper assembly?

Using a used part, a Chevy Malibu rear bumper assembly replacement typically runs $530–$810 all-in: the median used rear bumper assembly for this model lists at $434, and independent-shop labor for rear bumper assembly replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). The labor figure does not include paint and refinishing if not color-matched, and sensor recalibration if equipped. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Malibu model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Malibu rear bumper assembly years are interchangeable?

Salvage-yard interchange data links Chevy Malibu rear bumper assembly fitments across 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Malibu Rear Bumper Assembly Cost — From $119 to $919