Used Dodge Durango control arm from a salvage yard

Vehicle-specific price guide

How much is a used Dodge Durango control arm?

Asking prices from 97 salvage yards in 21 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 18, 2026
Strong coverage792 priced of 1,349 observed4 variantsMethodology v2.1 →

Part overview

About the Dodge Durango control arm

What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →

Also known asLower Control ArmA-ArmWishbone
Price summary

A used Dodge Durango control arm costs $40 to $800, with a median asking price of $193. Based on 792 priced salvage yard listings across the US, compatible across 2011–2024 (14 model years), updated Sep 18, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$212
Grade B (good)$190
Grade C (fair)$75

Dodge Durango control arm price snapshot

USD
Low
$40
Average
$217
High
$800
1,349 listings observed · 792 priced1mo ago· How we price·

Report incorrect price

Reporting price for Dodge Durango Control Arm

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$55–$800559 listings
Grade BStandard used$70–$353158 listings
Grade CVisible wear$75–$754 listings
Grade XUngraded$40–$30071 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $40–$800 overall range

Regional supply

Where the Dodge Durango control arm is listed

We found priced Dodge Durango control arm listings at 97 salvage yards across 21 states. California supplies the most, with 285 listings (36% of the total) from 13 yards. Location matters: yards in Arizona ask a median $93, while Alabama yards ask $365, 292% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California28513$161-17%
Florida19526$191-1%
Texas7917$190-2%
Mississippi544$250+30%
Arizona446$93-52%
Louisiana422$365+89%
Tennessee163$344+78%
Alabama151$365+89%

States with at least 10 priced listings. % is versus the $193 national median.

Replacement cost

What is the Dodge Durango control arm replacement cost?

ESTIMATE
Used part
$193
Dodge Durango median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$290–$645
median used part + labor

Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Dodge Durango Control Arm

$

Current avg: $217 — we suggest $184 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

high performance suspension (opt SDX), LH4 listingsInterchange 2017–2021$365$230 – $412
high performance suspension (opt SDX), RH4 listingsInterchange 2017–2021$365$220 – $412
w/o high performance suspension; LH4 listingsInterchange 2016–2022$190$190 – $190
w/o high performance suspension; RH2 listingsInterchange 2016–2024$190$100 – $190

Model-year comparison

What does a Dodge Durango control arm cost by year?

$84$130$176$222$26820152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Dodge Durango control arm cost?

Asking prices for a used Dodge Durango control arm are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 183% premium over grade-C stock, with grade-A medians at $212.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, w/o high performance suspension; LH, lists at a $190 median, while high performance suspension (opt SDX), RH commands $365, a 92% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $93, while 2021 tops the table at $255. Parts from 2011–2015 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Dodge Durango sits level with the Toyota 4Runner ($193), 7% above the Mercedes S Class ($180), and 93% above the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used control arm: what to check

  1. Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
  2. Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
  3. Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
  4. Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
  5. Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.

Keep browsing this vehicle

What other Dodge Durango parts are priced?

Price comparisons

Compare Dodge Durango control arm prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Dodge Durango control arm FAQ

How much is a used control arm for a Dodge Durango?

The median asking price is $193 across 792 priced listings from 97 yards. Grade-A units, the cleanest stock, have a median of $212. 2015 is the cheapest model year we track, with a median of $93.

How much does it cost to replace a Dodge Durango control arm?

Using a used part, a Dodge Durango control arm replacement typically runs $290–$645 all-in: the median used control arm for this model lists at $193, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.

Which Dodge Durango model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Dodge Durango control arm years are interchangeable?

Salvage-yard interchange data links Dodge Durango control arm fitments across 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024. Searching all 14 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Dodge Durango Control Arm Cost — From $40 to $800