Used Dodge Challenger control arm from a salvage yard

Vehicle-specific price guide

How much is a used Dodge Challenger control arm?

Asking prices from 464 salvage yards in 43 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026
Strong coverage3,738 priced of 5,918 observed14 variantsMethodology v2.1 →

Part overview

About the Dodge Challenger control arm

What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →

Also known asLower Control ArmA-ArmWishbone
Price summary

A used Dodge Challenger control arm costs $20 to $436, with a median asking price of $75. Based on 3,738 priced salvage yard listings across the US, compatible across 2011–2023 (13 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$75
Grade B (good)$90
Grade C (fair)$50

Dodge Challenger control arm price snapshot

USD
Low
$20
Average
$107
High
$436
5,918 listings observed · 3,738 priced9d ago· How we price·

Report incorrect price

Reporting price for Dodge Challenger Control Arm

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$20–$4362,707 listings
Grade BStandard used$35–$305432 listings
Grade CVisible wear$40–$9026 listings
Grade XUngraded$20–$125573 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $20–$436 overall range

Regional supply

Where the Dodge Challenger control arm is listed

We found priced Dodge Challenger control arm listings at 464 salvage yards across 43 states. California supplies the most, with 1,349 listings (27% of the total) from 47 yards. Location matters: yards in Mississippi ask a median $50, while Georgia yards ask $156, 212% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California1,34947$75
Arizona68720$82+9%
Florida55044$150+100%
Texas35548$57-24%
Colorado19010$75
Georgia16519$156+108%
Missouri15017$100+33%
Mississippi1258$50-33%

States with at least 10 priced listings. % is versus the $75 national median.

Replacement cost

What is the Dodge Challenger control arm replacement cost?

ESTIMATE
Used part
$75
Dodge Challenger median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$170–$525
median used part + labor

Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Dodge Challenger Control Arm

$

Current avg: $107 — we suggest $91 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2023)

RWD, 3.6L, rear45 listingsInterchange 2011–2021$75$45 – $100
RWD, 5.7L, rear45 listingsInterchange 2011–2021$75$45 – $100
RWD, 5.7L, forward, LH43 listingsInterchange 2015–2022$75$38 – $187
RWD, 6.2L, rear43 listingsInterchange 2012–2020$75$55 – $226
RWD, 6.4L, rear43 listingsInterchange 2012–2020$75$55 – $226
RWD, 3.6L, forward, LH37 listingsInterchange 2015–2023$75$35 – $265
AWD, RH36 listingsInterchange 2012–2023$75$50 – $159
AWD, LH35 listingsInterchange 2012–2022$75$50 – $191
RWD, 3.6L, forward, RH35 listingsInterchange 2015–2023$75$35 – $153
RWD, 5.7L, forward, RH33 listingsInterchange 2015–2022$75$40 – $305
RWD, 6.2L, forward, RH26 listingsInterchange 2011–2021$82$45 – $249
RWD, 6.4L, forward, RH26 listingsInterchange 2011–2021$82$45 – $249
RWD, 6.2L, forward, LH22 listingsInterchange 2011–2021$82$45 – $249
RWD, 6.4L, forward, LH22 listingsInterchange 2011–2021$82$45 – $249

Model-year comparison

What does a Dodge Challenger control arm cost by year?

$68$76$84$92$100201520162017201820192020202120222023
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Dodge Challenger control arm cost?

Asking prices for a used Dodge Challenger control arm are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 50% premium over grade-C stock, with grade-A medians at $75.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, AWD, LH, lists at a $75 median, while RWD, 6.4L, forward, RH commands $82, a 9% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $75, while 2021 tops the table at $95. Parts from 2011–2023 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 13 compatible years.

Against comparable vehicles, the Dodge Challenger sits 61% below the Toyota 4Runner ($193), 58% below the Mercedes S Class ($180), and 25% below the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used control arm: what to check

  1. Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
  2. Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
  3. Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
  4. Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
  5. Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.

Keep browsing this vehicle

What other Dodge Challenger parts are priced?

Price comparisons

Compare Dodge Challenger control arm prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Dodge Challenger control arm FAQ

How much is a used control arm for a Dodge Challenger?

The median asking price is $75 across 3,738 priced listings from 464 yards. Grade-A units, the cleanest stock, have a median of $75. 2023 is the cheapest model year we track, with a median of $75.

How much does it cost to replace a Dodge Challenger control arm?

Using a used part, a Dodge Challenger control arm replacement typically runs $170–$525 all-in: the median used control arm for this model lists at $75, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.

Which Dodge Challenger model years does this price guide cover?

This guide currently has year-level pricing for 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Dodge Challenger control arm years are interchangeable?

Salvage-yard interchange data links Dodge Challenger control arm fitments across 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Dodge Challenger Control Arm Cost — From $20 to $436