Used Hyundai Santa Fe control arm from a salvage yard

Vehicle-specific price guide

How much is a used Hyundai Santa Fe control arm?

Asking prices from 187 salvage yards in 32 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 21, 2026
Strong coverage1,320 priced of 1,550 observed2 variantsMethodology v2.1 →

Part overview

About the Hyundai Santa Fe control arm

What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →

Also known asLower Control ArmA-ArmWishbone
Price summary

A used Hyundai Santa Fe control arm costs $35 to $383, with a median asking price of $116. Based on 1,320 priced salvage yard listings across the US, compatible across 2015–2025 (11 model years), updated Sep 21, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$120
Grade B (good)$137
Grade C (fair)$100

Hyundai Santa Fe control arm price snapshot

USD
Low
$35
Average
$140
High
$383
1,550 listings observed · 1,320 priced1mo ago· How we price·

Report incorrect price

Reporting price for Hyundai Santa Fe Control Arm

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$40–$383901 listings
Grade BStandard used$35–$332336 listings
Grade CVisible wear$90–$1006 listings
Grade XUngraded$45–$19577 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $35–$383 overall range

Regional supply

Where the Hyundai Santa Fe control arm is listed

We found priced Hyundai Santa Fe control arm listings at 187 salvage yards across 32 states. California supplies the most, with 389 listings (29% of the total) from 36 yards. Location matters: yards in Illinois ask a median $80, while Michigan yards ask $183, 129% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California38936$100-14%
Arizona16414$125+8%
Illinois10716$80-31%
Nevada954$126+9%
Michigan8712$183+58%
Indiana8610$100-14%
Wisconsin7418$82-29%
Utah419$80-31%

States with at least 10 priced listings. % is versus the $116 national median.

Replacement cost

What is the Hyundai Santa Fe control arm replacement cost?

ESTIMATE
Used part
$116
Hyundai Santa Fe median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$210–$565
median used part + labor

Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Hyundai Santa Fe Control Arm

$

Current avg: $140 — we suggest $119 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

RH47 listingsInterchange 2021–2025$95$50 – $322
LH45 listingsInterchange 2021–2025$165$58 – $313

Model-year comparison

What does a Hyundai Santa Fe control arm cost by year?

$90$120$149$179$20920152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Hyundai Santa Fe control arm cost?

Asking prices for a used Hyundai Santa Fe control arm are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 20% premium over grade-C stock, with grade-A medians at $120.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, RH, lists at a $95 median, while LH commands $165, a 74% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $100, while 2021 tops the table at $199. Parts from 2015–2019 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Hyundai Santa Fe sits 40% below the Toyota 4Runner ($193), 36% below the Mercedes S Class ($180), and 16% above the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used control arm: what to check

  1. Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
  2. Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
  3. Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
  4. Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
  5. Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.

Keep browsing this vehicle

What other Hyundai Santa Fe parts are priced?

Price comparisons

Compare Hyundai Santa Fe control arm prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Hyundai Santa Fe control arm FAQ

How much is a used control arm for a Hyundai Santa Fe?

The median asking price is $116 across 1,320 priced listings from 187 yards. Grade-A units, the cleanest stock, have a median of $120. 2018 is the cheapest model year we track, with a median of $100.

How much does it cost to replace a Hyundai Santa Fe control arm?

Using a used part, a Hyundai Santa Fe control arm replacement typically runs $210–$565 all-in: the median used control arm for this model lists at $116, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.

Which Hyundai Santa Fe model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Hyundai Santa Fe control arm years are interchangeable?

Salvage-yard interchange data links Hyundai Santa Fe control arm fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Hyundai Santa Fe Control Arm Cost — From $35 to $383