2016 Jeep Grand Cherokee drive shaft price snapshot
- Low
- $70
- Average
- $233
- High
- $1,002

Year-specific price guide
A used 2016 Jeep Grand Cherokee drive shaft costs $70 to $1,002, with a median asking price of $190. Based on 313 priced salvage yard listings across the US, compatible across 2012–2022 (11 model years), updated Sep 12, 2026. Prices exclude shipping, core charges, and installation.
Condition comparison
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $70–$1,002 | 245 | |
| Grade BStandard used | $71–$321 | 46 | |
| Grade CVisible wear | $125–$135 | 2 | |
| Grade XUngraded | $80–$400 | 20 |
Median by grade
Median asking price by seller-reported condition grade · $70–$1,002 overall range
Replacement cost
Labor is a typical independent-shop range for drive shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. Full drive shaft replacement cost breakdown
Fitment matters
Year-specific context
The 2016 guide is based on 435 observed listings, including 313 with posted prices. Its $190 median is 12% below the Jeep Grand Cherokee guide's $217 median.
Among the 8 model years with current price data, 2016 ranks #1 from lowest to highest median.
Interchange data shows this part is also listed under model years 2012, 2013, 2014, 2015, 2017, 2018, 2019, 2020, 2021, 2022. Shopping across all 11 compatible years may surface better prices or condition grades.
Pricing is not a fitment guarantee. Match the VIN, part number, engine or drivetrain, and seller-listed variant before ordering.
Compare model years
Keep browsing this vehicle




















































Price data updating


Common questions
Based on 313 priced salvage-yard listings, a used 2016 Jeep Grand Cherokee drive shaft lists between $70 and $1,002, with a median asking price of $190.
Using a used part, a 2016 Jeep Grand Cherokee drive shaft replacement typically runs $285–$640 all-in: the median used drive shaft for this year lists at $190, and independent-shop labor for drive shaft replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). Labor is a national part-level estimate, not a quote for your vehicle.
Based on salvage-yard interchange data, listings for the 2016 Jeep Grand Cherokee drive shaft also appear under model years 2012, 2013, 2014, 2015, 2017, 2018, 2019, 2020, 2021, 2022, suggesting these years share compatible fitments. Always verify the exact part number, drivetrain, trim, and your VIN before buying — interchange compatibility can vary by variant.
A driveshaft is another name for a drive shaft. The prices on this page cover the 2016 Jeep Grand Cherokee drive shaft — median $190, from 313 listings.