Jeep Grand Cherokee drive shaft price snapshot
- Low
- $70
- Average
- $249
- High
- $1,182

Vehicle-specific price guide
A used Jeep Grand Cherokee drive shaft costs $70 to $1,182, with a median asking price of $217. Based on 2,884 priced salvage yard listings across the US, compatible across 2012–2025 (14 model years), updated Sep 12, 2026. Prices exclude shipping, core charges, and installation.
Condition comparison
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $70–$1,182 | 2,140 | |
| Grade BStandard used | $71–$470 | 574 | |
| Grade CVisible wear | $125–$250 | 15 | |
| Grade XUngraded | $80–$499 | 155 |
Median by grade
Median asking price by seller-reported condition grade · $70–$1,182 overall range
Replacement cost
Labor is a typical independent-shop range for drive shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. Full drive shaft replacement cost breakdown
Model-year comparison
Market analysis
Based on 2,884 listings, a used drive shaft for the Jeep Grand Cherokee runs $217 at the median, ranging $70–$1,182. That figure comes from 2,884 priced salvage-yard listings tracked by our index. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 54% premium over grade-C stock, with grade-A medians at $231.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 121.7" WB (3rd row seating, VIN J or K, 6th digit), 195mm, 2 speed transfer case, lists at a $186 median, while 121.7" WB (3rd row seating, VIN J or K, 6th digit), 230mm, non-locking (conventional differential) commands $300, a 61% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2016 units carry the lowest median at $190, while 2019 tops the table at $241. Parts from 2012–2022 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 11 compatible years.
Against comparable vehicles, the Jeep Grand Cherokee sits 12% below the GMC Sierra 1500 ($248), 14% above the Ram 1500 ($190), and 11% below the Ford F150 ($243) for the same part. The “similar vehicles” cards below open each comparison guide.
Keep browsing this vehicle




















































Price data updating


Price comparisons
Compare fitments
Common questions
Based on 2,884 priced salvage yard listings, a used Jeep Grand Cherokee drive shaft lists between $70 and $1,182, with a median asking price of $217.
Using a used part, a Jeep Grand Cherokee drive shaft replacement typically runs $310–$665 all-in: the median used drive shaft for this model lists at $217, and independent-shop labor for drive shaft replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). Labor is a national part-level estimate, not a quote for your vehicle.
Condition grade, mileage, model year, and fitment variant all move the price. Our data covers 7 distinct trims/variants for this part. Check the variant table above, since interchange differences can change the price substantially. Always confirm fitment against your VIN or part number before buying.
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2019, 2018, 2016. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Based on salvage-yard interchange data, Jeep Grand Cherokee drive shaft listings appear across model years 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, suggesting these years share compatible fitments. Shopping across all 14 years may surface better prices or grades. Always verify the exact part number and VIN before buying — interchange compatibility can vary by trim or drivetrain.
A driveshaft is another name for a drive shaft. The Jeep Grand Cherokee drive shaft prices on this page apply — median $217, from 2,884 salvage yard listings.