Used Chrysler 300 exhaust manifold from a salvage yard

Vehicle-specific price guide

How much is a used Chrysler 300 exhaust manifold?

Asking prices from 191 salvage yards in 37 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 30, 2026
Strong coverage596 priced of 1,000 observed4 variantsMethodology v2.1 →

Part overview

About the Chrysler 300 exhaust manifold

What the exhaust manifold does, common failure signs, and prices across all vehicles: used exhaust manifold price guide →

Price summary

A used Chrysler 300 exhaust manifold costs $35 to $272, with a median asking price of $50. Based on 596 priced salvage yard listings across the US, compatible across 2009–2023 (15 model years), updated Oct 30, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$60
Grade B (good)$200

Chrysler 300 exhaust manifold price snapshot

USD
Low
$35
Average
$79
High
$272
1,000 listings observed · 596 pricedUpdated 6h ago· How we price·

Report incorrect price

Reporting price for Chrysler 300 Exhaust Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$35–$262381 listings
Grade BStandard used$45–$20036 listings
Grade XUngraded$40–$272179 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $35–$272 overall range

Regional supply

Where the Chrysler 300 exhaust manifold is listed

We found priced Chrysler 300 exhaust manifold listings at 191 salvage yards across 37 states. Georgia supplies the most, with 366 listings (14% of the total) from 8 yards. Location matters: yards in Georgia ask a median $50, while Florida yards ask $150, 200% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Georgia3668$50
North Carolina26719$65+30%
Tennessee25211$65+30%
Indiana2135$50
Florida14416$150+200%
Texas1359$66+32%
Michigan13112$60+20%
California12915$85+70%

States with at least 10 priced listings. % is versus the $50 national median.

Replacement cost

What is the Chrysler 300 exhaust manifold replacement cost?

ESTIMATE
Used part
$50
Chrysler 300 median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$240–$800
median used part + labor

Labor is a typical independent-shop range for exhaust manifold replacement, not a quote for your vehicle; it does not include new manifold gaskets and hardware; rusted bolts may require extraction. The part price is the live median from the salvage-yard listings on this page. Full exhaust manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chrysler 300 Exhaust Manifold

$

Current avg: $79 — we suggest $67 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2023)

5.7L, RH34 listingsInterchange 2009–2021$50$35 – $203
6.4L, RH33 listingsInterchange 2015–2023$150$90 – $272
5.7L, LH26 listingsInterchange 2009–2021$50$35 – $200
6.4L, LH17 listingsInterchange 2015–2023$150$90 – $251

Model-year comparison

What does a Chrysler 300 exhaust manifold cost by year?

$45$60$75$90$105201520162017201820192020202120222023
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chrysler 300 exhaust manifold cost?

Asking prices for a used Chrysler 300 exhaust manifold are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 5.7L, LH, lists at a $50 median, while 6.4L, RH commands $150, a 200% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $50, while 2023 tops the table at $100. Parts from 2009–2021 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 11 compatible years.

Against comparable vehicles, the Chrysler 300 sits 30% below the GMC Sierra 1500 ($71), 33% below the Chevy Silverado 1500 ($75), and 60% below the Ram 3500 ($125) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used exhaust manifold: what to check

  1. Inspect runner webbing for thermal cracks: Check between cylinder port runners for stress cracks caused by extreme engine heat cycles.
  2. Check cylinder head flange flatness: Lay a straightedge across the mounting flange to check for warping that will cause persistent exhaust gas leaks.
  3. Verify catalytic converter substrate condition: Look inside integrated converter manifolds to confirm the ceramic honeycomb catalyst is intact and un-melted.
  4. Check oxygen sensor port thread condition: Ensure oxygen sensor threads are clean and not cross-threaded or stripped out by previous sensor removal.
  5. Install new exhaust studs and steel gaskets: Replace rusted cylinder head studs, brass nuts, and multi-layer steel gaskets to guarantee a leak-free seal.

Keep browsing this vehicle

What other Chrysler 300 parts are priced?

Price comparisons

Compare Chrysler 300 exhaust manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chrysler 300 exhaust manifold FAQ

How much is a used exhaust manifold for a Chrysler 300?

The median asking price is $50 across 596 priced listings from 191 yards. Grade-A units, the cleanest stock, have a median of $60. 2022 is the cheapest model year we track, with a median of $50.

How much does it cost to replace a Chrysler 300 exhaust manifold?

Using a used part, a Chrysler 300 exhaust manifold replacement typically runs $240–$800 all-in: the median used exhaust manifold for this model lists at $50, and independent-shop labor for exhaust manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new manifold gaskets and hardware; rusted bolts may require extraction. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chrysler 300 model years does this price guide cover?

This guide currently has year-level pricing for 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chrysler 300 exhaust manifold years are interchangeable?

Salvage-yard interchange data links Chrysler 300 exhaust manifold fitments across 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023. Searching all 15 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chrysler 300 Exhaust Manifold Cost — From $35 to $272