Used Chevy Malibu intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used Chevy Malibu intake manifold?

Asking prices from 176 salvage yards in 27 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 22, 2026
Strong coverage726 priced of 1,051 observed2 variantsMethodology v2.1 →

Part overview

About the Chevy Malibu intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used Chevy Malibu intake manifold costs $35 to $232, with a median asking price of $86. Based on 726 priced salvage yard listings across the US, compatible across 2013–2025 (13 model years), updated Sep 22, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$86
Grade B (good)$81
Grade C (fair)$100

Chevy Malibu intake manifold price snapshot

USD
Low
$35
Average
$96
High
$232
1,051 listings observed · 726 priced1mo ago· How we price·

Report incorrect price

Reporting price for Chevy Malibu Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$35–$232517 listings
Grade BStandard used$45–$20090 listings
Grade CVisible wear$50–$1758 listings
Grade XUngraded$35–$225111 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $35–$232 overall range

Regional supply

Where the Chevy Malibu intake manifold is listed

We found priced Chevy Malibu intake manifold listings at 176 salvage yards across 27 states. California supplies the most, with 198 listings (27% of the total) from 28 yards. Location matters: yards in Florida ask a median $65, while Arizona yards ask $150, 131% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California19828$76-12%
Texas11815$81-6%
Illinois7919$90+5%
Indiana6713$100+16%
Arizona619$150+74%
Michigan6023$100+16%
Wisconsin3516$85-1%
Florida2713$65-24%

States with at least 10 priced listings. % is versus the $86 national median.

Replacement cost

What is the Chevy Malibu intake manifold replacement cost?

ESTIMATE
Used part
$86
Chevy Malibu median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$275–$835
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Malibu Intake Manifold

$

Current avg: $96 — we suggest $82 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2022)

2.0L38 listingsInterchange 2016–2020$81$65 – $140
1.5L32 listingsInterchange 2018–2024$76$51 – $200

Model-year comparison

What does a Chevy Malibu intake manifold cost by year?

$68$77$86$96$10520152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Malibu intake manifold cost?

Asking prices for a used Chevy Malibu intake manifold are unusually spread out: the top listing asks about 7 times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 1.5L, lists at a $76 median, while 2.0L commands $81, a 7% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $75, while 2017 tops the table at $100. Parts from 2013–2019 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 7 compatible years.

Against comparable vehicles, the Chevy Malibu sits 52% below the Mercedes S Class ($181), 63% below the Ram 3500 ($235), and 32% below the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other Chevy Malibu parts are priced?

Price comparisons

Compare Chevy Malibu intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Malibu intake manifold FAQ

How much is a used intake manifold for a Chevy Malibu?

The median asking price is $86 across 726 priced listings from 176 yards. Grade-A units, the cleanest stock, have a median of $86. 2015 is the cheapest model year we track, with a median of $75.

How much does it cost to replace a Chevy Malibu intake manifold?

Using a used part, a Chevy Malibu intake manifold replacement typically runs $275–$835 all-in: the median used intake manifold for this model lists at $86, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Malibu model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Malibu intake manifold years are interchangeable?

Salvage-yard interchange data links Chevy Malibu intake manifold fitments across 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Malibu Intake Manifold Cost — From $35 to $232