Used Chevy Trax intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used Chevy Trax intake manifold?

Asking prices from 81 salvage yards in 22 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 23, 2026
Strong coverage312 priced of 490 observed2 variantsMethodology v2.1 →

Part overview

About the Chevy Trax intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used Chevy Trax intake manifold costs $50 to $165, with a median asking price of $76. Based on 312 priced salvage yard listings across the US, compatible across 2012–2025 (14 model years), updated Sep 23, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$76
Grade B (good)$86
Grade C (fair)$75

Chevy Trax intake manifold price snapshot

USD
Low
$50
Average
$86
High
$165
490 listings observed · 312 priced1mo ago· How we price·

Report incorrect price

Reporting price for Chevy Trax Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$50–$165220 listings
Grade BStandard used$71–$10014 listings
Grade CVisible wear$70–$754 listings
Grade XUngraded$50–$15074 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $50–$165 overall range

Regional supply

Where the Chevy Trax intake manifold is listed

We found priced Chevy Trax intake manifold listings at 81 salvage yards across 22 states. Florida supplies the most, with 76 listings (23% of the total) from 24 yards. Location matters: yards in Illinois ask a median $65, while Indiana yards ask $95, 46% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Florida7624$75-1%
Texas589$86+13%
California4811$71-7%
Illinois377$65-14%
Indiana235$95+25%
Wisconsin204$75-1%
Louisiana183$76
Tennessee101$81+7%

States with at least 10 priced listings. % is versus the $76 national median.

Replacement cost

What is the Chevy Trax intake manifold replacement cost?

ESTIMATE
Used part
$76
Chevy Trax median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$265–$825
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Trax Intake Manifold

$

Current avg: $86 — we suggest $73 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2021)

(1.4L), VIN B (8th digit, opt LUV)19 listingsInterchange 2012–2021$71$65 – $150
(1.4L), VIN M (8th digit, opt LE2)15 listingsInterchange 2021–2022$86$51 – $150

Model-year comparison

What does a Chevy Trax intake manifold cost by year?

$64$71$77$84$902015201620172018201920202021202220242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Trax intake manifold cost?

Asking prices for a used Chevy Trax intake manifold are unusually spread out: the top listing asks about 3 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 1% premium over grade-C stock, with grade-A medians at $76.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (1.4L), VIN B (8th digit, opt LUV), lists at a $71 median, while (1.4L), VIN M (8th digit, opt LE2) commands $86, a 21% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2018 units carry the lowest median at $71, while 2021 tops the table at $86. Parts from 2012–2021 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 10 compatible years.

Against comparable vehicles, the Chevy Trax sits 58% below the Mercedes S Class ($181), 68% below the Ram 3500 ($235), and 40% below the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other Chevy Trax parts are priced?

Price comparisons

Compare Chevy Trax intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Trax intake manifold FAQ

How much is a used intake manifold for a Chevy Trax?

The median asking price is $76 across 312 priced listings from 81 yards. Grade-A units, the cleanest stock, have a median of $76. 2020 is the cheapest model year we track, with a median of $71.

How much does it cost to replace a Chevy Trax intake manifold?

Using a used part, a Chevy Trax intake manifold replacement typically runs $265–$825 all-in: the median used intake manifold for this model lists at $76, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Trax model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Trax intake manifold years are interchangeable?

Salvage-yard interchange data links Chevy Trax intake manifold fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 14 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Trax Intake Manifold Cost — From $50 to $165