Chrysler Pacifica intake manifold price snapshot
- Low
- $50
- Average
- $139
- High
- $300
Vehicle-specific price guide
How much is a used Chrysler Pacifica intake manifold?
Asking prices from 128 salvage yards in 35 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 22, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Chrysler Pacifica intake manifold
What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →
Also known asInlet Manifold
Price summary
A used Chrysler Pacifica intake manifold costs $50 to $300, with a median asking price of $140. Based on 980 priced salvage yard listings across the US, compatible across 2016–2025 (10 model years), updated Sep 22, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$145
Grade B (good)$126
Grade C (fair)$125
USD
Condition comparison
Price by part grade
Grade AClean / low wear$50–$300431 listings
Grade BStandard used$50–$293310 listings
Grade CVisible wear$50–$14012 listings
Grade XUngraded$50–$300227 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $50–$300 | 431 | |
| Grade BStandard used | $50–$293 | 310 | |
| Grade CVisible wear | $50–$140 | 12 | |
| Grade XUngraded | $50–$300 | 227 |
Median by grade
Grade price comparison
Grade A$145
Grade B$126
Grade C$125
Ungraded$100
Median asking price by seller-reported condition grade · $50–$300 overall range
Regional supply
Where the Chrysler Pacifica intake manifold is listed
We found priced Chrysler Pacifica intake manifold listings at 128 salvage yards across 35 states. California supplies the most, with 467 listings (48% of the total) from 17 yards. Location matters: yards in Indiana ask a median $50, while Tennessee yards ask $197, 294% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 467 | 17 | $145+4% |
| Texas | 77 | 12 | $101-28% |
| Indiana | 75 | 6 | $50-64% |
| Tennessee | 35 | 3 | $197+41% |
| Illinois | 28 | 7 | $100-29% |
| Virginia | 24 | 5 | $100-29% |
| Florida | 23 | 3 | $90-36% |
| Michigan | 23 | 11 | $166+19% |
States with at least 10 priced listings. % is versus the $140 national median.
Replacement cost
What is the Chrysler Pacifica intake manifold replacement cost?
- Used part
- $140
- Chrysler Pacifica median asking price
- Labor
- $190–$750
- 2–5 hours at $95–$150/hr
- Estimated total
- $330–$890
- median used part + labor
Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Chrysler Pacifica intake manifold cost by year?
2025180 listingsFits 10 years$145$65 – $3002024181 listingsFits 9 years$150$50 – $3002023181 listingsFits 10 years$145$70 – $3002022176 listingsFits 10 years$145$65 – $3002021109 listingsFits 9 years$101$50 – $3002020179 listingsFits 9 years$125$50 – $3002019181 listingsFits 9 years$150$50 – $300201877 listingsFits 10 years$145$75 – $3002017177 listingsFits 10 years$145$65 – $300
Market analysis
How much does a used Chrysler Pacifica intake manifold cost?
Asking prices for a used Chrysler Pacifica intake manifold are unusually spread out: the top listing asks about 6 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 16% premium over grade-C stock, with grade-A medians at $145.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, gasoline, lower, lists at a $101 median, while gasoline, upper commands $176, a 74% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2021 units carry the lowest median at $101, while 2019 tops the table at $150. Parts from 2016–2024 are interchangeable, so if the 2021 fits your vehicle, it offers the best value across 9 compatible years.
Against comparable vehicles, the Chrysler Pacifica sits 23% below the Mercedes S Class ($181), 40% below the Ram 3500 ($235), and 11% above the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used intake manifold: what to check
- Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
- Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
- Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
- Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
- Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.
Keep browsing this vehicle
What other Chrysler Pacifica parts are priced?
01wide ±224%
Transmission Control Module
$116median
$25$545
02wide ±175%
Side Mirror
$232median
$50$860
03wide ±137%
Front Seat
$175median
$50$528
04wide ±184%
Car Radio
$190median
$49$750
05wide ±148%
Strut
$96median
$36$320
06wide ±285%
Air Bag
$143median
$35$850
07wide ±125%
Headlight Assembly
$424median
$110$1,170
08wide ±163%
Wheels
$192median
$45$670
09wide ±249%
Tail Light
$150median
$25$773
10wide ±154%
Rear Bumper Assembly
$482median
$125$1,606
11wide ±146%
Grille
$167median
$38$524
12wide ±204%
Axle Shaft
$136median
$40$594
Price comparisons
Compare Chrysler Pacifica intake manifold prices
Intake Manifoldcompare
MercedesSClassvsChryslerPacifica
Class$181
Pacifica$140
$41 diff3,617 listings
Intake ManifoldcompareRam3500vsChryslerPacifica
3500$235
Pacifica$140
$95 diff3,077 listings
Intake ManifoldcompareMercedesEClassvsChryslerPacifica
Class$126
Pacifica$140
$14 diff2,931 listings
Intake ManifoldcompareSubaruWRXvsChryslerPacifica
WRX$125
Pacifica$140
$15 diff2,796 listings
Intake ManifoldcompareMercedesGLEClassvsChryslerPacifica
Class$100
Pacifica$140
$40 diff2,730 listings
Intake ManifoldcompareRam1500vsChryslerPacifica
1500$135
Pacifica$140
$5 diff2,668 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±99%
Acura ILX
$125median
$30$278
Acurawide ±75%
Acura Integra
$56median
$36$120
Acurawide ±237%
Acura MDX
$99median
$30$500
Acurawide ±140%
Acura RDX
$75median
$25$235
Acurawide ±120%
Acura TLX
$110median
$38$303
Audiwide ±138%
Audi A4
$90median
$50$299
Audiwide ±134%
Audi A6
$150median
$38$440
Audiwide ±150%
Audi Q3
$100median
$50$350
Audiwide ±190%
Audi Q5
$126median
$40$520
Audiwide ±149%
Audi Q7
$131median
$50$440
Chryslerwide ±223%
Chrysler 300
$100median
$60$505
Chryslerwide ±102%
Chrysler Voyager
$125median
$45$300
Common questions
Chrysler Pacifica intake manifold FAQ
How much is a used intake manifold for a Chrysler Pacifica?
The median asking price is $140 across 980 priced listings from 128 yards. Grade-A units, the cleanest stock, have a median of $145. 2021 is the cheapest model year we track, with a median of $101.
How much does it cost to replace a Chrysler Pacifica intake manifold?
Using a used part, a Chrysler Pacifica intake manifold replacement typically runs $330–$890 all-in: the median used intake manifold for this model lists at $140, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.
Which Chrysler Pacifica model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Chrysler Pacifica intake manifold years are interchangeable?
Salvage-yard interchange data links Chrysler Pacifica intake manifold fitments across 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 10 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.