Dodge Durango intake manifold price snapshot
- Low
- $50
- Average
- $334
- High
- $1,200
Vehicle-specific price guide
How much is a used Dodge Durango intake manifold?
Asking prices from 276 salvage yards in 40 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Dodge Durango intake manifold
What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →
Also known asInlet Manifold
Price summary
A used Dodge Durango intake manifold costs $50 to $1,200, with a median asking price of $194. Based on 1,266 priced salvage yard listings across the US, compatible across 2011–2025 (15 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$216
Grade B (good)$150
Grade C (fair)$200
USD
Condition comparison
Price by part grade
Grade AClean / low wear$50–$1,200730 listings
Grade BStandard used$50–$1,200258 listings
Grade CVisible wear$50–$30022 listings
Grade XUngraded$50–$1,200256 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $50–$1,200 | 730 | |
| Grade BStandard used | $50–$1,200 | 258 | |
| Grade CVisible wear | $50–$300 | 22 | |
| Grade XUngraded | $50–$1,200 | 256 |
Median by grade
Grade price comparison
Grade A$216
Grade B$150
Grade C$200
Ungraded$200
Median asking price by seller-reported condition grade · $50–$1,200 overall range
Regional supply
Where the Dodge Durango intake manifold is listed
We found priced Dodge Durango intake manifold listings at 276 salvage yards across 40 states. California supplies the most, with 269 listings (14% of the total) from 22 yards. Location matters: yards in Indiana ask a median $100, while Arizona yards ask $425, 325% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 269 | 22 | $191-2% |
| Texas | 243 | 21 | $116-40% |
| Indiana | 144 | 10 | $100-48% |
| Michigan | 136 | 30 | $250+29% |
| Illinois | 92 | 11 | $240+24% |
| Oklahoma | 84 | 8 | $169-13% |
| Florida | 68 | 9 | $229+18% |
| Arizona | 61 | 6 | $425+119% |
States with at least 10 priced listings. % is versus the $194 national median.
Replacement cost
What is the Dodge Durango intake manifold replacement cost?
- Used part
- $194
- Dodge Durango median asking price
- Labor
- $190–$750
- 2–5 hours at $95–$150/hr
- Estimated total
- $385–$945
- median used part + labor
Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Dodge Durango intake manifold cost by year?
202590 listingsFits 13 years$225$75 – $8002024200 listingsFits 14 years$300$50 – $1,2002023192 listingsFits 14 years$211$50 – $1,2002022192 listingsFits 14 years$211$50 – $1,2002021200 listingsFits 13 years$191$50 – $1,2002020198 listingsFits 15 years$225$65 – $1,2002019200 listingsFits 13 years$191$50 – $1,2002018106 listingsFits 14 years$241$72 – $1,2002017150 listingsFits 12 years$131$50 – $6622016148 listingsFits 11 years$150$50 – $650201562 listingsFits 10 years$125$65 – $350
Market analysis
How much does a used Dodge Durango intake manifold cost?
Asking prices for a used Dodge Durango intake manifold are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 8% premium over grade-C stock, with grade-A medians at $216.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 3.6L, lower, lists at a $120 median, while 5.7L commands $240, a 100% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2015 units carry the lowest median at $125, while 2024 tops the table at $300. Parts from 2011–2022 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 10 compatible years.
Against comparable vehicles, the Dodge Durango sits 7% above the Mercedes S Class ($181), 17% below the Ram 3500 ($235), and 54% above the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used intake manifold: what to check
- Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
- Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
- Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
- Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
- Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.
Keep browsing this vehicle
What other Dodge Durango parts are priced?
01wide ±241%
Wheels
$200median
$35$1,000
02wide ±246%
Side Mirror
$141median
$30$725
03wide ±230%
Axle Shaft
$126median
$30$609
04wide ±166%
Headlight Assembly
$515median
$90$1,800
05wide ±149%
Grille
$174median
$29$547
06wide ±286%
Strut
$145median
$35$863
07wide ±135%
Transmission
$1,283median
$388$3,862
08wide ±176%
Alternator
$105median
$25$395
09wide ±262%
Steering Rack
$590median
$99$3,187
10wide ±181%
Rear Bumper
$255median
$70$995
11wide ±158%
Radiator
$159median
$35$538
12wide ±251%
Tail Light
$250median
$45$1,300
Price comparisons
Compare Dodge Durango intake manifold prices
Intake Manifoldcompare
MercedesSClassvsDodgeDurango
Class$181
Durango$194
$13 diff3,903 listings
Intake ManifoldcompareRam3500vsDodgeDurango
3500$235
Durango$194
$41 diff3,363 listings
Intake ManifoldcompareSubaruWRXvsDodgeDurango
WRX$125
Durango$194
$69 diff3,082 listings
Intake ManifoldcompareMercedesGLEClassvsDodgeDurango
Class$100
Durango$194
$94 diff3,016 listings
Intake ManifoldcompareRam1500vsDodgeDurango
1500$135
Durango$194
$59 diff2,954 listings
Intake ManifoldcompareFordExplorervsDodgeDurango
Explorer$81
Durango$194
$113 diff2,829 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±99%
Acura ILX
$125median
$30$278
Acurawide ±75%
Acura Integra
$56median
$36$120
Acurawide ±237%
Acura MDX
$99median
$30$500
Acurawide ±140%
Acura RDX
$75median
$25$235
Acurawide ±120%
Acura TLX
$110median
$38$303
Audiwide ±138%
Audi A4
$90median
$50$299
Audiwide ±134%
Audi A6
$150median
$38$440
Audiwide ±150%
Audi Q3
$100median
$50$350
Dodgewide ±290%
Dodge Challenger
$200median
$40$1,200
Dodgewide ±244%
Dodge Charger
$241median
$50$1,226
Dodgewide ±132%
Dodge Grand Caravan
$95median
$50$300
Dodgewide ±113%
Dodge Journey
$95median
$35$250
Common questions
Dodge Durango intake manifold FAQ
How much is a used intake manifold for a Dodge Durango?
The median asking price is $194 across 1,266 priced listings from 276 yards. Grade-A units, the cleanest stock, have a median of $216. 2015 is the cheapest model year we track, with a median of $125.
How much does it cost to replace a Dodge Durango intake manifold?
Using a used part, a Dodge Durango intake manifold replacement typically runs $385–$945 all-in: the median used intake manifold for this model lists at $194, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.
Which Dodge Durango model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Dodge Durango intake manifold years are interchangeable?
Salvage-yard interchange data links Dodge Durango intake manifold fitments across 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 15 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.