Dodge Challenger intake manifold price snapshot
- Low
- $40
- Average
- $371
- High
- $1,200
Vehicle-specific price guide
How much is a used Dodge Challenger intake manifold?
Asking prices from 145 salvage yards in 29 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 20, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Dodge Challenger intake manifold
What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →
Also known asInlet Manifold
Price summary
A used Dodge Challenger intake manifold costs $40 to $1,200, with a median asking price of $200. Based on 1,033 priced salvage yard listings across the US, compatible across 2011–2023 (13 model years), updated Sep 20, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$200
Grade B (good)$241
Grade C (fair)$200
USD
Condition comparison
Price by part grade
Grade AClean / low wear$40–$1,093681 listings
Grade BStandard used$61–$1,15088 listings
Grade CVisible wear$70–$2955 listings
Grade XUngraded$50–$1,200259 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $40–$1,093 | 681 | |
| Grade BStandard used | $61–$1,150 | 88 | |
| Grade CVisible wear | $70–$295 | 5 | |
| Grade XUngraded | $50–$1,200 | 259 |
Median by grade
Grade price comparison
Grade A$200
Grade B$241
Grade C$200
Ungraded$125
Median asking price by seller-reported condition grade · $40–$1,200 overall range
Regional supply
Where the Dodge Challenger intake manifold is listed
We found priced Dodge Challenger intake manifold listings at 145 salvage yards across 29 states. California supplies the most, with 472 listings (44% of the total) from 32 yards. Location matters: yards in Indiana ask a median $100, while Iowa yards ask $974, 874% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 472 | 32 | $150-25% |
| Illinois | 126 | 13 | $150-25% |
| Arizona | 84 | 13 | $344+72% |
| Michigan | 53 | 11 | $700+250% |
| Indiana | 47 | 4 | $100-50% |
| Minnesota | 37 | 5 | $800+300% |
| Wisconsin | 30 | 6 | $750+275% |
| Iowa | 30 | 3 | $974+387% |
States with at least 10 priced listings. % is versus the $200 national median.
Replacement cost
What is the Dodge Challenger intake manifold replacement cost?
- Used part
- $200
- Dodge Challenger median asking price
- Labor
- $190–$750
- 2–5 hours at $95–$150/hr
- Estimated total
- $390–$950
- median used part + labor
Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Dodge Challenger intake manifold cost by year?
2023114 listingsFits 13 years$150$61 – $1,0932022198 listingsFits 11 years$191$40 – $1,2002021106 listingsFits 12 years$750$50 – $1,2002020198 listingsFits 13 years$216$61 – $1,2002019107 listingsFits 13 years$150$61 – $1,0932018200 listingsFits 13 years$240$50 – $1,2002017198 listingsFits 13 years$200$61 – $1,2002016198 listingsFits 13 years$200$61 – $1,2002015198 listingsFits 11 years$177$50 – $1,200
Market analysis
How much does a used Dodge Challenger intake manifold cost?
Asking prices for a used Dodge Challenger intake manifold are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 3.6L, lower, lists at a $100 median, while 6.4L commands $1,041, a 941% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2019 units carry the lowest median at $150, while 2021 tops the table at $750. Parts from 2011–2023 are interchangeable, so if the 2019 fits your vehicle, it offers the best value across 13 compatible years.
Against comparable vehicles, the Dodge Challenger sits 10% above the Mercedes S Class ($181), 15% below the Ram 3500 ($235), and 59% above the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used intake manifold: what to check
- Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
- Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
- Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
- Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
- Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.
Keep browsing this vehicle
What other Dodge Challenger parts are priced?
01wide ±230%
Wheels
$279median
$51$1,335
02wide ±237%
Axle Shaft
$190median
$35$937
03wide ±214%
Strut
$154median
$30$690
04wide ±115%
Headlight Assembly
$705median
$180$1,800
05wide ±288%
Transmission
$1,798median
$303$10,666
06wide ±288%
Engine
$3,000median
$610$17,869
07wide ±215%
Starter
$85median
$25$390
08wide ±132%
Side Mirror
$150median
$35$431
09wide ±230%
Grille
$155median
$25$737
10wide ±159%
Steering Rack
$675median
$171$2,324
11wide ±188%
Alternator
$85median
$30$350
12wide ±329%
Radiator
$130median
$44$900
Price comparisons
Compare Dodge Challenger intake manifold prices
Intake Manifoldcompare
MercedesSClassvsDodgeChallenger
Class$181
Challenger$200
$19 diff3,670 listings
Intake ManifoldcompareRam3500vsDodgeChallenger
3500$235
Challenger$200
$35 diff3,130 listings
Intake ManifoldcompareMercedesEClassvsDodgeChallenger
Class$126
Challenger$200
$74 diff2,984 listings
Intake ManifoldcompareSubaruWRXvsDodgeChallenger
WRX$125
Challenger$200
$75 diff2,849 listings
Intake ManifoldcompareMercedesGLEClassvsDodgeChallenger
Class$100
Challenger$200
$100 diff2,783 listings
Intake ManifoldcompareLandRoverRangeRovervsDodgeChallenger
Rover$150
Challenger$200
$50 diff2,517 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±99%
Acura ILX
$125median
$30$278
Acurawide ±75%
Acura Integra
$56median
$36$120
Acurawide ±237%
Acura MDX
$99median
$30$500
Acurawide ±140%
Acura RDX
$75median
$25$235
Acurawide ±120%
Acura TLX
$110median
$38$303
Audiwide ±138%
Audi A4
$90median
$50$299
Audiwide ±134%
Audi A6
$150median
$38$440
Audiwide ±150%
Audi Q3
$100median
$50$350
Dodgewide ±244%
Dodge Charger
$241median
$50$1,226
Dodgewide ±296%
Dodge Durango
$194median
$50$1,200
Dodgewide ±132%
Dodge Grand Caravan
$95median
$50$300
Dodgewide ±113%
Dodge Journey
$95median
$35$250
Common questions
Dodge Challenger intake manifold FAQ
How much is a used intake manifold for a Dodge Challenger?
The median asking price is $200 across 1,033 priced listings from 145 yards. Grade-A units, the cleanest stock, have a median of $200. 2023 is the cheapest model year we track, with a median of $150.
How much does it cost to replace a Dodge Challenger intake manifold?
Using a used part, a Dodge Challenger intake manifold replacement typically runs $390–$950 all-in: the median used intake manifold for this model lists at $200, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.
Which Dodge Challenger model years does this price guide cover?
This guide currently has year-level pricing for 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Dodge Challenger intake manifold years are interchangeable?
Salvage-yard interchange data links Dodge Challenger intake manifold fitments across 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.