Used GMC Acadia intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used GMC Acadia intake manifold?

Asking prices from 146 salvage yards in 27 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 24, 2026
Strong coverage787 priced of 1,075 observed2 variantsMethodology v2.1 →

Part overview

About the GMC Acadia intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used GMC Acadia intake manifold costs $36 to $190, with a median asking price of $75. Based on 787 priced salvage yard listings across the US, compatible across 2010–2026 (17 model years), updated Sep 24, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$81
Grade B (good)$75
Grade C (fair)$75

GMC Acadia intake manifold price snapshot

USD
Low
$36
Average
$81
High
$190
1,075 listings observed · 787 priced1mo ago· How we price·

Report incorrect price

Reporting price for GMC Acadia Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$36–$179513 listings
Grade BStandard used$36–$190149 listings
Grade CVisible wear$50–$10015 listings
Grade XUngraded$40–$150110 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $36–$190 overall range

Regional supply

Where the GMC Acadia intake manifold is listed

We found priced GMC Acadia intake manifold listings at 146 salvage yards across 27 states. Texas supplies the most, with 264 listings (30% of the total) from 14 yards. Location matters: yards in Texas ask a median $71, while Michigan yards ask $125, 76% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Texas26414$71-5%
Illinois11817$75
Michigan8125$125+67%
Oklahoma562$71-5%
Indiana489$90+20%
Florida4418$75
Louisiana414$81+8%
Wisconsin3210$82+9%

States with at least 10 priced listings. % is versus the $75 national median.

Replacement cost

What is the GMC Acadia intake manifold replacement cost?

ESTIMATE
Used part
$75
GMC Acadia median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$265–$825
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for GMC Acadia Intake Manifold

$

Current avg: $81 — we suggest $69 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2023)

3.6L44 listingsInterchange 2017–2025$81$66 – $150
2.0L39 listingsInterchange 2019–2025$46$36 – $150

Model-year comparison

What does a GMC Acadia intake manifold cost by year?

$50$72$93$114$13520152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used GMC Acadia intake manifold cost?

Asking prices for a used GMC Acadia intake manifold are unusually spread out: the top listing asks about 5 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 8% premium over grade-C stock, with grade-A medians at $81.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 2.0L, lists at a $46 median, while 3.6L commands $81, a 76% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2022 units carry the lowest median at $56, while 2024 tops the table at $129. Parts from 2017–2025 are interchangeable, so if the 2022 fits your vehicle, it offers the best value across 9 compatible years.

Against comparable vehicles, the GMC Acadia sits 59% below the Mercedes S Class ($181), 68% below the Ram 3500 ($235), and 40% below the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other GMC Acadia parts are priced?

Price comparisons

Compare GMC Acadia intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

GMC Acadia intake manifold FAQ

How much is a used intake manifold for a GMC Acadia?

The median asking price is $75 across 787 priced listings from 146 yards. Grade-A units, the cleanest stock, have a median of $81. 2022 is the cheapest model year we track, with a median of $56.

How much does it cost to replace a GMC Acadia intake manifold?

Using a used part, a GMC Acadia intake manifold replacement typically runs $265–$825 all-in: the median used intake manifold for this model lists at $75, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which GMC Acadia model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which GMC Acadia intake manifold years are interchangeable?

Salvage-yard interchange data links GMC Acadia intake manifold fitments across 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 17 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used GMC Acadia Intake Manifold Cost — From $36 to $190