Ram 2500 intake manifold price snapshot
- Low
- $50
- Average
- $374
- High
- $1,133
Vehicle-specific price guide
How much is a used Ram 2500 intake manifold?
Asking prices from 144 salvage yards in 41 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 16, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Ram 2500 intake manifold
What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →
Also known asInlet Manifold
Price summary
A used Ram 2500 intake manifold costs $50 to $1,133, with a median asking price of $228. Based on 1,077 priced salvage yard listings across the US, compatible across 2013–2026 (14 model years), updated Oct 16, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$228
Grade B (good)$257
Grade C (fair)$200
USD
Condition comparison
Price by part grade
Grade AClean / low wear$50–$1,016618 listings
Grade BStandard used$100–$1,133260 listings
Grade CVisible wear$75–$62651 listings
Grade XUngraded$50–$1,020148 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $50–$1,016 | 618 | |
| Grade BStandard used | $100–$1,133 | 260 | |
| Grade CVisible wear | $75–$626 | 51 | |
| Grade XUngraded | $50–$1,020 | 148 |
Median by grade
Grade price comparison
Grade A$228
Grade B$257
Grade C$200
Ungraded$200
Median asking price by seller-reported condition grade · $50–$1,133 overall range
Regional supply
Where the Ram 2500 intake manifold is listed
We found priced Ram 2500 intake manifold listings at 144 salvage yards across 41 states. Georgia supplies the most, with 135 listings (13% of the total) from 8 yards. Location matters: yards in Virginia ask a median $125, while New York yards ask $900, 620% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Georgia | 135 | 8 | $223-2% |
| Tennessee | 112 | 5 | $244+7% |
| North Carolina | 111 | 6 | $228 |
| California | 88 | 23 | $145-36% |
| Virginia | 70 | 4 | $125-45% |
| Arizona | 55 | 10 | $700+207% |
| Florida | 51 | 13 | $259+14% |
| New York | 44 | 8 | $900+295% |
States with at least 10 priced listings. % is versus the $228 national median.
Replacement cost
What is the Ram 2500 intake manifold replacement cost?
- Used part
- $228
- Ram 2500 median asking price
- Labor
- $190–$750
- 2–5 hours at $95–$150/hr
- Estimated total
- $420–$980
- median used part + labor
Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Ram 2500 intake manifold cost by year?
202511 listingsFits 2 years$241$231 – $1,0162024150 listingsFits 12 years$243$50 – $1,1332023147 listingsFits 12 years$223$50 – $1,1332022150 listingsFits 12 years$228$50 – $1,133202161 listingsFits 12 years$141$50 – $1,1332020147 listingsFits 12 years$243$50 – $1,0202019150 listingsFits 11 years$228$50 – $1,1332017200 listingsFits 12 years$244$50 – $1,1332016200 listingsFits 12 years$244$50 – $1,1332015199 listingsFits 12 years$175$50 – $1,133
Market analysis
How much does a used Ram 2500 intake manifold cost?
Asking prices for a used Ram 2500 intake manifold are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 14% premium over grade-C stock, with grade-A medians at $228.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 6.7L, lists at a $231 median, while 6.4L commands $1,016, a 340% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2021 units carry the lowest median at $141, while 2016 tops the table at $244. Parts from 2013–2024 are interchangeable, so if the 2021 fits your vehicle, it offers the best value across 12 compatible years.
Against comparable vehicles, the Ram 2500 sits 26% above the Mercedes S Class ($181), 3% below the Ram 3500 ($235), and 81% above the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used intake manifold: what to check
- Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
- Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
- Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
- Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
- Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.
Keep browsing this vehicle
What other Ram 2500 parts are priced?
01wide ±247%
Front Seat
$180median
$46$934
02wide ±186%
Transmission Control Module
$153median
$30$600
03wide ±283%
Side Mirror
$292median
$50$1,700
04wide ±237%
Wheels
$253median
$50$1,250
05wide ±200%
Drive Shaft
$295median
$70$1,248
06wide ±287%
Car Radio
$182median
$35$1,080
07wide ±208%
Grille
$600median
$100$2,600
08wide ±114%
Door Assembly
$650median
$110$1,597
09wide ±197%
Tail Light
$250median
$44$1,027
10wide ±107%
Headlight Assembly
$600median
$106$1,385
11wide ±114%
Window Regulator
$166median
$28$405
12wide ±132%
Fuel Tank
$220median
$70$650
Price comparisons
Compare Ram 2500 intake manifold prices
Intake Manifoldcompare
MercedesSClassvsRam2500
Class$181
2500$228
$47 diff3,714 listings
Intake ManifoldcompareRam3500vsRam2500
3500$235
2500$228
$7 diff3,174 listings
Intake ManifoldcompareMercedesEClassvsRam2500
Class$126
2500$228
$102 diff3,028 listings
Intake ManifoldcompareMercedesGLEClassvsRam2500
Class$100
2500$228
$128 diff2,827 listings
Intake ManifoldcompareRam1500vsRam2500
1500$135
2500$228
$93 diff2,765 listings
Intake ManifoldcompareFordExplorervsRam2500
Explorer$81
2500$228
$147 diff2,640 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±99%
Acura ILX
$125median
$30$278
Acurawide ±75%
Acura Integra
$56median
$36$120
Acurawide ±237%
Acura MDX
$99median
$30$500
Acurawide ±140%
Acura RDX
$75median
$25$235
Acurawide ±120%
Acura TLX
$110median
$38$303
Audiwide ±138%
Audi A4
$90median
$50$299
Audiwide ±134%
Audi A6
$150median
$38$440
Audiwide ±150%
Audi Q3
$100median
$50$350
Audiwide ±190%
Audi Q5
$126median
$40$520
Audiwide ±149%
Audi Q7
$131median
$50$440
Ramwide ±207%
Ram 1500
$135median
$40$600
Ramwide ±230%
Ram 3500
$235median
$50$1,133
Common questions
Ram 2500 intake manifold FAQ
How much is a used intake manifold for a Ram 2500?
The median asking price is $228 across 1,077 priced listings from 144 yards. Grade-A units, the cleanest stock, have a median of $228. 2021 is the cheapest model year we track, with a median of $141.
How much does it cost to replace a Ram 2500 intake manifold?
Using a used part, a Ram 2500 intake manifold replacement typically runs $420–$980 all-in: the median used intake manifold for this model lists at $228, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.
Which Ram 2500 model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Ram 2500 intake manifold years are interchangeable?
Salvage-yard interchange data links Ram 2500 intake manifold fitments across 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 14 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.