Used Chevy Silverado 1500 master cylinder from a salvage yard

Vehicle-specific price guide

How much is a used Chevy Silverado 1500 master cylinder?

Asking prices from 146 salvage yards in 29 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 20, 2026
Strong coverage443 priced of 561 observed2 variantsMethodology v2.1 →

Part overview

About the Chevy Silverado 1500 master cylinder

What the master cylinder does, common failure signs, and prices across all vehicles: used master cylinder price guide →

Also known asBrake Master Cylinder
Price summary

A used Chevy Silverado 1500 master cylinder costs $25 to $405, with a median asking price of $99. Based on 443 priced salvage yard listings across the US, compatible across 2014–2025 (12 model years), updated Sep 20, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$89
Grade B (good)$99
Grade C (fair)$75

Chevy Silverado 1500 master cylinder price snapshot

USD
Low
$25
Average
$108
High
$405
561 listings observed · 443 priced1mo ago· How we price·

Report incorrect price

Reporting price for Chevy Silverado 1500 Master Cylinder

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$25–$310259 listings
Grade BStandard used$25–$405173 listings
Grade CVisible wear$68–$1003 listings
Grade XUngraded$35–$1008 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $25–$405 overall range

Regional supply

Where the Chevy Silverado 1500 master cylinder is listed

We found priced Chevy Silverado 1500 master cylinder listings at 146 salvage yards across 29 states. Illinois supplies the most, with 95 listings (21% of the total) from 8 yards. Location matters: yards in Illinois ask a median $46, while Florida yards ask $176, 283% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Illinois958$46-54%
California724$100+1%
Florida4511$176+78%
Texas4017$68-31%
Georgia3513$99
Michigan1915$99
North Carolina179$76-23%
Alabama143$148+49%

States with at least 10 priced listings. % is versus the $99 national median.

Replacement cost

What is the Chevy Silverado 1500 master cylinder replacement cost?

ESTIMATE
Used part
$99
Chevy Silverado 1500 median asking price
Labor
$145–$450
1.5–3 hours at $95–$150/hr
Estimated total
$245–$550
median used part + labor

Labor is a typical independent-shop range for master cylinder replacement, not a quote for your vehicle; it does not include brake fluid and full system bleed at all four wheels. The part price is the live median from the salvage-yard listings on this page. Full master cylinder replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Silverado 1500 Master Cylinder

$

Current avg: $108 — we suggest $92 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

Non-Interchange search using only Chevy Truck-Silverado 1500 (1999 Up)

1 listings
$125$125 – $125

Model-year comparison

What does a Chevy Silverado 1500 master cylinder cost by year?

$41$67$93$118$14420152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Silverado 1500 master cylinder cost?

Asking prices for a used Chevy Silverado 1500 master cylinder are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 19% premium over grade-C stock, with grade-A medians at $89.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, Non-Interchange search using Chevy Truck-Silverado 1500 (1999 Up) and similar models, lists at a $113 median, while Non-Interchange search using only Chevy Truck-Silverado 1500 (1999 Up) commands $125, a 11% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2018 units carry the lowest median at $46, while 2017 tops the table at $137. Parts from 2014–2020 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 7 compatible years.

Against comparable vehicles, the Chevy Silverado 1500 sits 60% below the Nissan Titan ($250), 52% above the Ford Mustang ($65), and 55% above the Honda Civic ($64) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used master cylinder: what to check

  1. Inspect rear piston seal for fluid leaks: Check the rear mounting flange for wet fluid leakage that damages power brake booster rubber diaphragms.
  2. Verify reservoir clarity and mounting grommets: Inspect the plastic fluid reservoir for sun-embrittled walls, cracks, or hardened rubber mounting grommets.
  3. Check brake line port thread types: Verify whether hydraulic output ports use metric bubble flares or inverted flare threads before connecting brake lines.
  4. Confirm fluid level sensor plug condition: Check the fluid level float switch connector for corrosion or broken locking tabs to avoid low-fluid dash warnings.
  5. Bench bleed before vehicle installation: Purge trapped air from internal piston chambers using a bench bleed kit before attaching vehicle brake lines.

Keep browsing this vehicle

What other Chevy Silverado 1500 parts are priced?

Price comparisons

Compare Chevy Silverado 1500 master cylinder prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Silverado 1500 master cylinder FAQ

How much is a used master cylinder for a Chevy Silverado 1500?

The median asking price is $99 across 443 priced listings from 146 yards. Grade-A units, the cleanest stock, have a median of $89. 2019 is the cheapest model year we track, with a median of $46.

How much does it cost to replace a Chevy Silverado 1500 master cylinder?

Using a used part, a Chevy Silverado 1500 master cylinder replacement typically runs $245–$550 all-in: the median used master cylinder for this model lists at $99, and independent-shop labor for master cylinder replacement typically takes 1.5–3 hours at $95–$150/hr ($145–$450). The labor figure does not include brake fluid and full system bleed at all four wheels. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Silverado 1500 model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Silverado 1500 master cylinder years are interchangeable?

Salvage-yard interchange data links Chevy Silverado 1500 master cylinder fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Silverado 1500 Master Cylinder Cost — From $25 to $405