Used Chevy Trax master cylinder from a salvage yard

Vehicle-specific price guide

How much is a used Chevy Trax master cylinder?

Asking prices from 81 salvage yards in 22 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 22, 2026
Strong coverage306 priced of 510 observed2 variantsMethodology v2.1 →

Part overview

About the Chevy Trax master cylinder

What the master cylinder does, common failure signs, and prices across all vehicles: used master cylinder price guide →

Also known asBrake Master Cylinder
Price summary

A used Chevy Trax master cylinder costs $20 to $305, with a median asking price of $99. Based on 306 priced salvage yard listings across the US, compatible across 2012–2025 (13 model years), updated Sep 22, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$128
Grade B (good)$76

Chevy Trax master cylinder price snapshot

USD
Low
$20
Average
$121
High
$305
510 listings observed · 306 priced1mo ago· How we price·

Report incorrect price

Reporting price for Chevy Trax Master Cylinder

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$20–$305248 listings
Grade BStandard used$20–$23231 listings
Grade XUngraded$25–$15027 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $20–$305 overall range

Regional supply

Where the Chevy Trax master cylinder is listed

We found priced Chevy Trax master cylinder listings at 81 salvage yards across 22 states. Florida supplies the most, with 109 listings (36% of the total) from 9 yards. Location matters: yards in Texas ask a median $76, while Florida yards ask $203, 167% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Florida1099$203+105%
Texas6516$76-23%
California419$137+38%
Georgia1711$99
Oklahoma103$76-23%

States with at least 10 priced listings. % is versus the $99 national median.

Replacement cost

What is the Chevy Trax master cylinder replacement cost?

ESTIMATE
Used part
$99
Chevy Trax median asking price
Labor
$145–$450
1.5–3 hours at $95–$150/hr
Estimated total
$245–$550
median used part + labor

Labor is a typical independent-shop range for master cylinder replacement, not a quote for your vehicle; it does not include brake fluid and full system bleed at all four wheels. The part price is the live median from the salvage-yard listings on this page. Full master cylinder replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Trax Master Cylinder

$

Current avg: $121 — we suggest $103 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

Model-year comparison

What does a Chevy Trax master cylinder cost by year?

$53$93$133$173$2132015201620172018201920202021202220242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Trax master cylinder cost?

Asking prices for a used Chevy Trax master cylinder are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 68% premium over grade-B stock, with grade-A medians at $128.

Model year matters too: 2018 units carry the lowest median at $59, while 2016 tops the table at $203. Parts from 2012–2020 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 9 compatible years.

Against comparable vehicles, the Chevy Trax sits 60% below the Nissan Titan ($250), 52% above the Ford Mustang ($65), and 55% above the Honda Civic ($64) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used master cylinder: what to check

  1. Inspect rear piston seal for fluid leaks: Check the rear mounting flange for wet fluid leakage that damages power brake booster rubber diaphragms.
  2. Verify reservoir clarity and mounting grommets: Inspect the plastic fluid reservoir for sun-embrittled walls, cracks, or hardened rubber mounting grommets.
  3. Check brake line port thread types: Verify whether hydraulic output ports use metric bubble flares or inverted flare threads before connecting brake lines.
  4. Confirm fluid level sensor plug condition: Check the fluid level float switch connector for corrosion or broken locking tabs to avoid low-fluid dash warnings.
  5. Bench bleed before vehicle installation: Purge trapped air from internal piston chambers using a bench bleed kit before attaching vehicle brake lines.

Keep browsing this vehicle

What other Chevy Trax parts are priced?

Price comparisons

Compare Chevy Trax master cylinder prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Trax master cylinder FAQ

How much is a used master cylinder for a Chevy Trax?

The median asking price is $99 across 306 priced listings from 81 yards. Grade-A units, the cleanest stock, have a median of $128. 2018 is the cheapest model year we track, with a median of $59.

How much does it cost to replace a Chevy Trax master cylinder?

Using a used part, a Chevy Trax master cylinder replacement typically runs $245–$550 all-in: the median used master cylinder for this model lists at $99, and independent-shop labor for master cylinder replacement typically takes 1.5–3 hours at $95–$150/hr ($145–$450). The labor figure does not include brake fluid and full system bleed at all four wheels. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Trax model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Trax master cylinder years are interchangeable?

Salvage-yard interchange data links Chevy Trax master cylinder fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2024, 2025. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Trax Master Cylinder Cost — From $20 to $305