Mazda 3 master cylinder price snapshot
- Low
- $55
- Average
- $84
- High
- $147
Vehicle-specific price guide
How much is a used Mazda 3 master cylinder?
Asking prices from 125 salvage yards in 30 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 23, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Mazda 3 master cylinder
What the master cylinder does, common failure signs, and prices across all vehicles: used master cylinder price guide →
Also known asBrake Master Cylinder
Price summary
A used Mazda 3 master cylinder costs $55 to $147, with a median asking price of $76. Based on 431 priced salvage yard listings across the US, compatible across 2014–2025 (12 model years), updated Sep 23, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$76
Grade B (good)$76
USD
Condition comparison
Price by part grade
Grade AClean / low wear$55–$147387 listings
Grade BStandard used$76–$12834 listings
Grade XUngraded$60–$9010 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $55–$147 | 387 | |
| Grade BStandard used | $76–$128 | 34 | |
| Grade XUngraded | $60–$90 | 10 |
Median by grade
Grade price comparison
Grade A$76
Grade B$76
Ungraded$88
Median asking price by seller-reported condition grade · $55–$147 overall range
Regional supply
Where the Mazda 3 master cylinder is listed
We found priced Mazda 3 master cylinder listings at 125 salvage yards across 30 states. Arizona supplies the most, with 119 listings (18% of the total) from 5 yards. Location matters: yards in Arizona ask a median $76, while Michigan yards ask $100, 32% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Arizona | 119 | 5 | $76 |
| Texas | 93 | 15 | $76 |
| California | 82 | 17 | $76 |
| Florida | 51 | 16 | $99+30% |
| Georgia | 47 | 12 | $99+30% |
| Michigan | 32 | 8 | $100+32% |
| Kansas | 19 | 1 | $76 |
| Ohio | 18 | 5 | $76 |
States with at least 10 priced listings. % is versus the $76 national median.
Replacement cost
What is the Mazda 3 master cylinder replacement cost?
- Used part
- $76
- Mazda 3 median asking price
- Labor
- $145–$450
- 1.5–3 hours at $95–$150/hr
- Estimated total
- $220–$525
- median used part + labor
Labor is a typical independent-shop range for master cylinder replacement, not a quote for your vehicle; it does not include brake fluid and full system bleed at all four wheels. The part price is the live median from the salvage-yard listings on this page. Full master cylinder replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Mazda 3 master cylinder cost by year?
202556 listings$76$75 – $100202482 listings$76$76 – $100202391 listingsFits 6 years$76$55 – $128202291 listingsFits 6 years$76$55 – $128202191 listingsFits 6 years$76$55 – $124202091 listingsFits 6 years$76$55 – $1242018100 listingsFits 5 years$99$55 – $147201779 listingsFits 5 years$99$65 – $1282016100 listingsFits 5 years$99$55 – $128201571 listingsFits 5 years$99$60 – $135
Market analysis
How much does a used Mazda 3 master cylinder cost?
Asking prices for a used Mazda 3 master cylinder sit in a fairly tight band around the $76 median, so most quotes far outside it deserve a second look.
Model year matters too: 2020 units carry the lowest median at $76, while 2015 tops the table at $99. Parts from 2019–2024 are interchangeable, so if the 2020 fits your vehicle, it offers the best value across 6 compatible years.
Against comparable vehicles, the Mazda 3 sits 70% below the Nissan Titan ($250), 17% above the Ford Mustang ($65), and 19% above the Honda Civic ($64) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used master cylinder: what to check
- Inspect rear piston seal for fluid leaks: Check the rear mounting flange for wet fluid leakage that damages power brake booster rubber diaphragms.
- Verify reservoir clarity and mounting grommets: Inspect the plastic fluid reservoir for sun-embrittled walls, cracks, or hardened rubber mounting grommets.
- Check brake line port thread types: Verify whether hydraulic output ports use metric bubble flares or inverted flare threads before connecting brake lines.
- Confirm fluid level sensor plug condition: Check the fluid level float switch connector for corrosion or broken locking tabs to avoid low-fluid dash warnings.
- Bench bleed before vehicle installation: Purge trapped air from internal piston chambers using a bench bleed kit before attaching vehicle brake lines.
Keep browsing this vehicle
What other Mazda 3 parts are priced?
01wide ±202%
Tail Light
$195median
$34$821
02wide ±206%
Axle Shaft
$96median
$28$424
03wide ±179%
Side Mirror
$157median
$30$593
04wide ±225%
Wheels
$178median
$30$830
05wide ±253%
Transmission
$560median
$116$2,947
06wide ±115%
Headlight Assembly
$950median
$147$2,325
07wide ±235%
Grille
$184median
$29$895
08wide ±110%
Fender
$198median
$65$500
09wide ±207%
Engine
$1,072median
$204$4,650
10wide ±227%
Alternator
$88median
$25$425
11wide ±162%
Strut
$100median
$30$354
12wide ±254%
Starter
$71median
$25$385
Price comparisons
Compare Mazda 3 master cylinder prices
Master Cylindercompare
NissanTitanvsMazda3
Titan$250
3$76
$174 diff2,730 listings
Master CylindercompareFordMustangvsMazda3
Mustang$65
3$76
$11 diff2,565 listings
Master CylindercompareHondaCivicvsMazda3
Civic$64
3$76
$12 diff2,287 listings
Master CylindercompareMercedesEClassvsMazda3
Class$65
3$76
$11 diff2,216 listings
Master CylindercompareHyundaiElantravsMazda3
Elantra$99
3$76
$23 diff2,197 listings
Master CylindercompareMercedesSClassvsMazda3
Class$87
3$76
$11 diff1,650 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±140%
Acura ILX
$75median
$25$235
Acurawide ±152%
Acura Integra
$99median
$35$335
Acurawide ±267%
Acura MDX
$99median
$25$554
Acurawide ±138%
Acura RDX
$99median
$25$299
Acurawide ±244%
Acura TLX
$100median
$25$513
Audiwide ±213%
Audi A4
$51median
$30$247
Audiwide ±97%
Audi A6
$99median
$40$232
Audiwide ±65%
Audi Q3
$76median
$51$150
Audiwide ±95%
Audi Q5
$76median
$35$180
Audiwide ±138%
Audi Q7
$100median
$30$305
Mazdawide ±141%
Mazda CX5
$76median
$24$239
Mazdawide ±207%
Mazda Miata
$76median
$20$335
Common questions
Mazda 3 master cylinder FAQ
How much is a used master cylinder for a Mazda 3?
The median asking price is $76 across 431 priced listings from 125 yards. Grade-A units, the cleanest stock, have a median of $76. 2025 is the cheapest model year we track, with a median of $76.
How much does it cost to replace a Mazda 3 master cylinder?
Using a used part, a Mazda 3 master cylinder replacement typically runs $220–$525 all-in: the median used master cylinder for this model lists at $76, and independent-shop labor for master cylinder replacement typically takes 1.5–3 hours at $95–$150/hr ($145–$450). The labor figure does not include brake fluid and full system bleed at all four wheels. Labor is a national part-level estimate, not a quote for your vehicle.
Which Mazda 3 model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Mazda 3 master cylinder years are interchangeable?
Salvage-yard interchange data links Mazda 3 master cylinder fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.