Used Infiniti QX50 steering column from a salvage yard

Vehicle-specific price guide

How much is a used Infiniti QX50 steering column?

Asking prices from 443 salvage yards in 45 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026
Strong coverage1,306 priced of 1,409 observed4 variantsMethodology v2.1 →

Part overview

About the Infiniti QX50 steering column

What the steering column does, common failure signs, and prices across all vehicles: used steering column price guide →

Price summary

A used Infiniti QX50 steering column costs $50 to $621, with a median asking price of $186. Based on 1,306 priced salvage yard listings across the US, compatible across 2015–2024 (9 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$200
Grade B (good)$175

Infiniti QX50 steering column price snapshot

USD
Low
$50
Average
$213
High
$621
1,409 listings observed · 1,306 priced8d ago· How we price·

Report incorrect price

Reporting price for Infiniti QX50 Steering Column

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$50–$621827 listings
Grade BStandard used$85–$621452 listings
Grade XUngraded$50–$37527 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $50–$621 overall range

Regional supply

Where the Infiniti QX50 steering column is listed

We found priced Infiniti QX50 steering column listings at 443 salvage yards across 45 states. Florida supplies the most, with 503 listings (25% of the total) from 34 yards. Location matters: yards in Georgia ask a median $125, while Wisconsin yards ask $240, 92% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Florida50334$192+3%
Texas30245$166-11%
Georgia12713$125-33%
Michigan8923$235+26%
Illinois6818$182-2%
Tennessee6413$201+8%
Wisconsin6110$240+29%
North Carolina6119$182-2%

States with at least 10 priced listings. % is versus the $186 national median.

Replacement cost

What is the Infiniti QX50 steering column replacement cost?

ESTIMATE
Used part
$186
Infiniti QX50 median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$375–$935
median used part + labor

Labor is a typical independent-shop range for steering column replacement, not a quote for your vehicle; it does not include steering wheel and dashboard panel removal and reassembly. The part price is the live median from the salvage-yard listings on this page. Full steering column replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Infiniti QX50 Steering Column

$

Current avg: $213 — we suggest $181 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2024)

manual tilt and telescopic, rain sensor49 listingsInterchange 2019–2023$180$90 – $289
power tilt and telescopic, w/o adaptive steering49 listingsInterchange 2019–2024$244$106 – $621
manual tilt and telescopic, w/o rain sensor46 listingsInterchange 2019–2023$196$93 – $325
power tilt and telescopic, adaptive steering44 listingsInterchange 2019–2022$271$120 – $450

Model-year comparison

What does a Infiniti QX50 steering column cost by year?

$129$155$180$206$232201520162017201920202021202220232024
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Infiniti QX50 steering column cost?

Asking prices for a used Infiniti QX50 steering column are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 14% premium over grade-B stock, with grade-A medians at $200.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, manual tilt and telescopic, rain sensor, lists at a $180 median, while power tilt and telescopic, adaptive steering commands $271, a 51% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $143, while 2024 tops the table at $221. Parts from 2015–2017 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 3 compatible years.

Against comparable vehicles, the Infiniti QX50 sits 28% above the Subaru Impreza ($145), 49% above the Subaru Outback ($125), and 28% above the Honda Civic ($145) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used steering column: what to check

  1. Inspect intermediate shaft u-joint splines: Check lower universal joints for play, binding, or stripped pinch-bolt splines where the column meets the rack.
  2. Verify electric power steering motor inclusion: Ask if columns with integrated electric assist include the assist motor, reduction gear, and module assembly.
  3. Check tilt and telescoping locking lever: Test manual tilt and telescoping levers to ensure column lock shoes clamp tightly without slipping under load.
  4. Confirm ignition switch and clockspring wiring: Match multi-function switch stalk plugs, clockspring connectors, and key tumbler housings to your vehicle.
  5. Lock steering wheel straight before installation: Lock steering wheel alignment straight before installation to prevent over-rotating and snapping internal clockspring wires.

Keep browsing this vehicle

What other Infiniti QX50 parts are priced?

Price comparisons

Compare Infiniti QX50 steering column prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Infiniti QX50 steering column FAQ

How much is a used steering column for a Infiniti QX50?

The median asking price is $186 across 1,306 priced listings from 443 yards. Grade-A units, the cleanest stock, have a median of $200. 2016 is the cheapest model year we track, with a median of $143.

How much does it cost to replace a Infiniti QX50 steering column?

Using a used part, a Infiniti QX50 steering column replacement typically runs $375–$935 all-in: the median used steering column for this model lists at $186, and independent-shop labor for steering column replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include steering wheel and dashboard panel removal and reassembly. Labor is a national part-level estimate, not a quote for your vehicle.

Which Infiniti QX50 model years does this price guide cover?

This guide currently has year-level pricing for 2024, 2023, 2022, 2021, 2020, 2019, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Infiniti QX50 steering column years are interchangeable?

Salvage-yard interchange data links Infiniti QX50 steering column fitments across 2015, 2016, 2017, 2019, 2020, 2021, 2022, 2023, 2024. Searching all 9 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Infiniti QX50 Steering Column Cost — From $50 to $621