Used Ford F250 torque converter from a salvage yard

Vehicle-specific price guide

How much is a used Ford F250 torque converter?

Asking prices from 16 salvage yards in 9 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 29, 2026
Limited coverage21 priced of 50 observed1 variantMethodology v2.1 →

Part overview

About the Ford F250 torque converter

What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →

Also known asTransmission Torque ConverterTorque Convertor
Price summary

A used Ford F250 torque converter costs $749 to $1,086, with a median asking price of $968. Based on 21 priced salvage yard listings across the US, compatible across 2015–2025 (8 model years), updated Oct 29, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$968

Ford F250 torque converter price snapshot

USD
Low
$749
Average
$947
High
$1,086
50 listings observed · 21 pricedUpdated 12h ago· How we price·

Report incorrect price

Reporting price for Ford F250 Torque Converter

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$749–$1,08621 listings

Replacement cost

What is the Ford F250 torque converter replacement cost?

ESTIMATE
Used part
$968
Ford F250 median asking price
Labor
$475–$1,500
5–10 hours at $95–$150/hr
Estimated total
$1,445–$2,470
median used part + labor

Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Ford F250 Torque Converter

$

Current avg: $947 — we suggest $805 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

(AT), 6.7L10 listingsInterchange 2023–2025$979$749 – $1,086

Model-year comparison

What does a Ford F250 torque converter cost by year?

$770$835$899$964$1,028201820232025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Ford F250 torque converter cost?

Asking prices for a used Ford F250 torque converter sit in a fairly tight band around the $968 median, so most quotes far outside it deserve a second look.

Model year matters too: 2018 units carry the lowest median at $856, while 2023 tops the table at $979. Year-level pages linked in the table above break each one down by grade and variant.

Against comparable vehicles, the Ford F250 sits 342% above the Jeep Compass ($219), 350% above the Jeep Cherokee ($215), and 297% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used torque converter: what to check

  1. Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
  2. Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
  3. Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
  4. Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
  5. Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.

Keep browsing this vehicle

What other Ford F250 parts are priced?

Price comparisons

Compare Ford F250 torque converter prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Ford F250 torque converter FAQ

How much is a used torque converter for a Ford F250?

The median asking price is $968 across 21 priced listings from 16 yards. Grade-A units, the cleanest stock, have a median of $968. 2018 is the cheapest model year we track, with a median of $856.

How much does it cost to replace a Ford F250 torque converter?

Using a used part, a Ford F250 torque converter replacement typically runs $1,445–$2,470 all-in: the median used torque converter for this model lists at $968, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.

Which Ford F250 model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2023, 2022, 2020, 2019, 2018, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Ford F250 torque converter years are interchangeable?

Salvage-yard interchange data links Ford F250 torque converter fitments across 2015, 2016, 2018, 2019, 2020, 2022, 2023, 2025. Searching all 8 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Ford F250 Torque Converter Cost — From $749 to $1,086