Ford Fusion torque converter price snapshot
- Low
- $70
- Average
- $232
- High
- $711
Vehicle-specific price guide
How much is a used Ford Fusion torque converter?
Asking prices from 16 salvage yards in 12 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Ford Fusion torque converter
What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →
Also known asTransmission Torque ConverterTorque Convertor
Price summary
A used Ford Fusion torque converter costs $70 to $711, with a median asking price of $200. Based on 116 priced salvage yard listings across the US, compatible across 2009–2020 (12 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$150
Grade B (good)$200
Grade C (fair)$300
USD
Condition comparison
Price by part grade
Grade AClean / low wear$100–$71142 listings
Grade BStandard used$70–$30038 listings
Grade CVisible wear$300–$30012 listings
Grade XUngraded$70–$47524 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $100–$711 | 42 | |
| Grade BStandard used | $70–$300 | 38 | |
| Grade CVisible wear | $300–$300 | 12 | |
| Grade XUngraded | $70–$475 | 24 |
Median by grade
Grade price comparison
Grade A$150
Grade B$200
Grade C$300
Ungraded$475
Median asking price by seller-reported condition grade · $70–$711 overall range
Regional supply
Where the Ford Fusion torque converter is listed
We found priced Ford Fusion torque converter listings at 16 salvage yards across 12 states. North Carolina supplies the most, with 30 listings (26% of the total) from 1 yard. Location matters: yards in Arkansas ask a median $70, while Pennsylvania yards ask $475, 579% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| North Carolina | 30 | 1 | $300+50% |
| Pennsylvania | 16 | 2 | $475+138% |
| Arkansas | 14 | 1 | $70-65% |
| Maine | 14 | 1 | $300+50% |
| California | 10 | 1 | $150-25% |
States with at least 10 priced listings. % is versus the $200 national median.
Replacement cost
What is the Ford Fusion torque converter replacement cost?
- Used part
- $200
- Ford Fusion median asking price
- Labor
- $475–$1,500
- 5–10 hours at $95–$150/hr
- Estimated total
- $675–$1,700
- median used part + labor
Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Fusion; 2.0L; SE; (4-122)
3 listingsInterchange 2013–2017$300$200 – $475Fusion; Titanium
3 listingsInterchange 2013–2017$300$200 – $475Fusion; 1.5L; SE; (4-91)
1 listings$150$150 – $150Fusion; SEL
1 listings$150$150 – $150Search using Ford Fusion and similar models
1 listings$125$125 – $125Search using only Ford Fusion
1 listings$125$125 – $125Model-year comparison
What does a Ford Fusion torque converter cost by year?
Market analysis
How much does a used Ford Fusion torque converter cost?
Asking prices for a used Ford Fusion torque converter are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, Search using Ford Fusion and similar models, lists at a $125 median, while Fusion; Titanium commands $300, a 140% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2015 units carry the lowest median at $200, while 2019 tops the table at $300. Parts from 2009–2019 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 11 compatible years.
Against comparable vehicles, the Ford Fusion sits 9% below the Jeep Compass ($219), 7% below the Jeep Cherokee ($215), and 18% below the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used torque converter: what to check
- Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
- Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
- Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
- Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
- Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.
Keep browsing this vehicle
What other Ford Fusion parts are priced?
01wide ±206%
Tail Light
$90median
$30$400
02wide ±228%
Grille
$161median
$30$765
03wide ±266%
Wheels
$137median
$30$760
04wide ±125%
Transmission
$1,624median
$532$4,596
05wide ±100%
Axle Shaft
$137median
$30$305
06wide ±145%
Side Mirror
$159median
$35$497
07wide ±160%
AC Compressor
$100median
$30$350
08wide ±218%
Alternator
$85median
$20$390
09wide ±97%
Fender
$241median
$75$541
10wide ±230%
Radiator
$115median
$20$550
11wide ±140%
Headlight Assembly
$469median
$85$1,400
12wide ±197%
Strut
$75median
$25$320
Price comparisons
Compare Ford Fusion torque converter prices
Torque Convertercompare
JeepCompassvsFordFusion
Compass$219
Fusion$200
$19 diff886 listings
Torque ConvertercompareVolkswagenAtlasvsFordFusion
Atlas$244
Fusion$200
$44 diff634 listings
Torque ConvertercompareFordF150vsFordFusion
F150$512
Fusion$200
$312 diff552 listings
Torque ConvertercompareJeepRenegadevsFordFusion
Renegade$206
Fusion$200
$6 diff486 listings
Torque ConvertercompareChevyCruzevsFordFusion
Cruze$138
Fusion$200
$62 diff457 listings
Torque ConvertercompareFordExplorervsFordFusion
Explorer$250
Fusion$200
$50 diff429 listings
Compare fitments
What do similar vehicles charge for this part?
Fordtight ±6%
Ford Bronco Sport
$385median
$350$400
Fordspread ±54%
Ford Edge
$300median
$150$475
Fordspread ±55%
Ford Escape
$300median
$70$400
Fordwide ±61%
Ford Expedition
$460median
$250$814
Fordwide ±129%
Ford Explorer
$250median
$95$740
Fordwide ±77%
Ford F150
$512median
$250$1,036
Fordtight ±17%
Ford F250
$968median
$749$1,086
Fordspread ±30%
Ford Mustang
$300median
$200$380
Fordspread ±24%
Ford Transit
$440median
$300$512
Ford
Ford Bronco
Price data updating
Ford
Ford Focus
Price data updating
Ford
Ford Maverick
Price data updating
Common questions
Ford Fusion torque converter FAQ
How much is a used torque converter for a Ford Fusion?
The median asking price is $200 across 116 priced listings from 16 yards. Grade-A units, the cleanest stock, have a median of $150. 2020 is the cheapest model year we track, with a median of $200.
How much does it cost to replace a Ford Fusion torque converter?
Using a used part, a Ford Fusion torque converter replacement typically runs $675–$1,700 all-in: the median used torque converter for this model lists at $200, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.
Which Ford Fusion model years does this price guide cover?
This guide currently has year-level pricing for 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Ford Fusion torque converter years are interchangeable?
Salvage-yard interchange data links Ford Fusion torque converter fitments across 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.