Used GMC Canyon water pump from a salvage yard

Vehicle-specific price guide

How much is a used GMC Canyon water pump?

Asking prices from 51 salvage yards in 25 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 24, 2026
Strong coverage273 priced of 464 observed3 variantsMethodology v2.1 →

Part overview

About the GMC Canyon water pump

What the water pump does, common failure signs, and prices across all vehicles: used water pump price guide →

Also known asCoolant PumpEngine Water Pump
Price summary

A used GMC Canyon water pump costs $24 to $250, with a median asking price of $66. Based on 273 priced salvage yard listings across the US, compatible across 2008–2025 (18 model years), updated Sep 24, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$67
Grade B (good)$66

GMC Canyon water pump price snapshot

USD
Low
$24
Average
$88
High
$250
464 listings observed · 273 priced1mo ago· How we price·

Report incorrect price

Reporting price for GMC Canyon Water Pump

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$24–$241181 listings
Grade BStandard used$53–$17551 listings
Grade XUngraded$25–$25041 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $24–$250 overall range

Regional supply

Where the GMC Canyon water pump is listed

We found priced GMC Canyon water pump listings at 51 salvage yards across 25 states. California supplies the most, with 85 listings (31% of the total) from 9 yards. Location matters: yards in Texas ask a median $24, while New York yards ask $143, 496% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California859$65-2%
Washington521$66
New York122$143+117%
Indiana115$40-39%
Michigan114$114+73%
Wisconsin104$45-32%
Texas102$24-64%
Florida102$43-35%

States with at least 10 priced listings. % is versus the $66 national median.

Replacement cost

What is the GMC Canyon water pump replacement cost?

ESTIMATE
Used part
$66
GMC Canyon median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$255–$815
median used part + labor

Labor is a typical independent-shop range for water pump replacement, not a quote for your vehicle; it does not include coolant refill and system bleed; timing belt replacement recommended if belt-driven. The part price is the live median from the salvage-yard listings on this page. Full water pump replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for GMC Canyon Water Pump

$

Current avg: $88 — we suggest $75 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2022)

2.5L13 listingsInterchange 2015–2022$65$24 – $200
3.6L7 listingsInterchange 2017–2022$66$30 – $161

2.8L

2 listings
Interchange 2017–2018$241$95 – $241

Model-year comparison

What does a GMC Canyon water pump cost by year?

$45$63$80$98$1162015201620172018201920202021202220232024
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used GMC Canyon water pump cost?

Asking prices for a used GMC Canyon water pump are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 2% premium over grade-B stock, with grade-A medians at $67.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 2.5L, lists at a $65 median, while 2.8L commands $241, a 271% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $50, while 2023 tops the table at $110. Parts from 2014–2023 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 10 compatible years.

Against comparable vehicles, the GMC Canyon sits 56% below the Mercedes S Class ($150), 58% below the Mercedes GLE Class ($158), and 54% below the Mercedes E Class ($144) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used water pump: what to check

  1. Inspect weep hole for coolant stain trails: Check the bottom housing weep hole for wet coolant leaks, green crust, or rust trails indicating shaft seal failure.
  2. Verify shaft bearing play and impeller rotation: Spin the pulley hub by hand to feel for gritty bearing movement, radial shaft wobble, or binding impellers.
  3. Check impeller blade material and condition: Inspect plastic or stamped metal impeller vanes for cavitation erosion, broken fins, or loose press-fit hubs.
  4. Confirm housing mounting flange flatness: Verify that aluminum mating flanges are free of deep gouges, corrosion pits, or cracked bolt holes.
  5. Install a new gasket and flush system coolant: Clean block mating surfaces thoroughly and refill with fresh manufacturer-approved coolant during installation.

Keep browsing this vehicle

What other GMC Canyon parts are priced?

Price comparisons

Compare GMC Canyon water pump prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

GMC Canyon water pump FAQ

How much is a used water pump for a GMC Canyon?

The median asking price is $66 across 273 priced listings from 51 yards. Grade-A units, the cleanest stock, have a median of $67. 2015 is the cheapest model year we track, with a median of $50.

How much does it cost to replace a GMC Canyon water pump?

Using a used part, a GMC Canyon water pump replacement typically runs $255–$815 all-in: the median used water pump for this model lists at $66, and independent-shop labor for water pump replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include coolant refill and system bleed; timing belt replacement recommended if belt-driven. Labor is a national part-level estimate, not a quote for your vehicle.

Which GMC Canyon model years does this price guide cover?

This guide currently has year-level pricing for 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which GMC Canyon water pump years are interchangeable?

Salvage-yard interchange data links GMC Canyon water pump fitments across 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 18 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used GMC Canyon Water Pump Cost — From $24 to $250