Used GMC Yukon water pump from a salvage yard

Vehicle-specific price guide

How much is a used GMC Yukon water pump?

Asking prices from 106 salvage yards in 36 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026
Strong coverage519 priced of 799 observed5 variantsMethodology v2.1 →

Part overview

About the GMC Yukon water pump

What the water pump does, common failure signs, and prices across all vehicles: used water pump price guide →

Also known asCoolant PumpEngine Water Pump
Price summary

A used GMC Yukon water pump costs $25 to $315, with a median asking price of $75. Based on 519 priced salvage yard listings across the US, compatible across 2014–2025 (12 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$75
Grade B (good)$75
Grade C (fair)$56

GMC Yukon water pump price snapshot

USD
Low
$25
Average
$108
High
$315
799 listings observed · 519 priced9d ago· How we price·

Report incorrect price

Reporting price for GMC Yukon Water Pump

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$25–$315297 listings
Grade BStandard used$51–$232168 listings
Grade CVisible wear$49–$607 listings
Grade XUngraded$30–$25047 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $25–$315 overall range

Regional supply

Where the GMC Yukon water pump is listed

We found priced GMC Yukon water pump listings at 106 salvage yards across 36 states. Washington supplies the most, with 179 listings (30% of the total) from 2 yards. Location matters: yards in Wisconsin ask a median $50, while Florida yards ask $210, 320% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Washington1792$56-25%
California9110$75
South Carolina353$100+33%
Florida264$210+180%
Wisconsin257$50-33%
Ohio256$133+77%
Michigan1810$80+7%
Kentucky183$109+45%

States with at least 10 priced listings. % is versus the $75 national median.

Replacement cost

What is the GMC Yukon water pump replacement cost?

ESTIMATE
Used part
$75
GMC Yukon median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$265–$825
median used part + labor

Labor is a typical independent-shop range for water pump replacement, not a quote for your vehicle; it does not include coolant refill and system bleed; timing belt replacement recommended if belt-driven. The part price is the live median from the salvage-yard listings on this page. Full water pump replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for GMC Yukon Water Pump

$

Current avg: $108 — we suggest $92 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

5.3L, belt driven27 listingsInterchange 2019–2024$60$51 – $232
6.2L, belt driven21 listingsInterchange 2022–2024$125$75 – $315
5.3L, electric (below exhaust manifold)18 listingsInterchange 2021–2023$75$56 – $220
6.2L, electric (below exhaust manifold)18 listingsInterchange 2021–2023$75$56 – $220
3.0L9 listingsInterchange 2023–2025$199$39 – $212

Model-year comparison

What does a GMC Yukon water pump cost by year?

$46$61$75$90$10520152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used GMC Yukon water pump cost?

Asking prices for a used GMC Yukon water pump are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 34% premium over grade-C stock, with grade-A medians at $75.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 5.3L, belt driven, lists at a $60 median, while 3.0L commands $199, a 232% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $51, while 2017 tops the table at $100. Parts from 2014–2020 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 7 compatible years.

Against comparable vehicles, the GMC Yukon sits 50% below the Mercedes S Class ($150), 53% below the Mercedes GLE Class ($158), and 48% below the Mercedes E Class ($144) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used water pump: what to check

  1. Inspect weep hole for coolant stain trails: Check the bottom housing weep hole for wet coolant leaks, green crust, or rust trails indicating shaft seal failure.
  2. Verify shaft bearing play and impeller rotation: Spin the pulley hub by hand to feel for gritty bearing movement, radial shaft wobble, or binding impellers.
  3. Check impeller blade material and condition: Inspect plastic or stamped metal impeller vanes for cavitation erosion, broken fins, or loose press-fit hubs.
  4. Confirm housing mounting flange flatness: Verify that aluminum mating flanges are free of deep gouges, corrosion pits, or cracked bolt holes.
  5. Install a new gasket and flush system coolant: Clean block mating surfaces thoroughly and refill with fresh manufacturer-approved coolant during installation.

Keep browsing this vehicle

What other GMC Yukon parts are priced?

Price comparisons

Compare GMC Yukon water pump prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

GMC Yukon water pump FAQ

How much is a used water pump for a GMC Yukon?

The median asking price is $75 across 519 priced listings from 106 yards. Grade-A units, the cleanest stock, have a median of $75. 2019 is the cheapest model year we track, with a median of $51.

How much does it cost to replace a GMC Yukon water pump?

Using a used part, a GMC Yukon water pump replacement typically runs $265–$825 all-in: the median used water pump for this model lists at $75, and independent-shop labor for water pump replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include coolant refill and system bleed; timing belt replacement recommended if belt-driven. Labor is a national part-level estimate, not a quote for your vehicle.

Which GMC Yukon model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which GMC Yukon water pump years are interchangeable?

Salvage-yard interchange data links GMC Yukon water pump fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used GMC Yukon Water Pump Cost — From $25 to $315