Used Chevy Impala ABS module from a salvage yard

Vehicle-specific price guide

How much is a used Chevy Impala ABS module?

Asking prices from 398 salvage yards in 45 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 29, 2026
Strong coverage512 priced of 709 observed2 variantsMethodology v2.1 →

Part overview

About the Chevy Impala ABS module

What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →

Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary

A used Chevy Impala ABS module costs $39 to $345, with a median asking price of $100. Based on 512 priced salvage yard listings across the US, compatible across 2012–2020 (9 model years), updated Oct 29, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$139
Grade B (good)$90
Grade C (fair)$75

Chevy Impala ABS module price snapshot

USD
Low
$39
Average
$130
High
$345
709 listings observed · 512 pricedUpdated 2h ago· How we price·

Report incorrect price

Reporting price for Chevy Impala ABS Module

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$39–$345377 listings
Grade BStandard used$39–$25092 listings
Grade CVisible wear$50–$1009 listings
Grade XUngraded$40–$9534 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $39–$345 overall range

Regional supply

Where the Chevy Impala ABS module is listed

We found priced Chevy Impala ABS module listings at 398 salvage yards across 45 states. Illinois supplies the most, with 323 listings (14% of the total) from 25 yards. Location matters: yards in California ask a median $80, while Florida yards ask $149, 86% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Illinois32325$99-1%
Georgia17613$99-1%
Ohio14931$106+6%
Kentucky13215$102+2%
Michigan12730$137+37%
California12127$80-20%
Florida9413$149+49%
Connecticut9012$139+39%

States with at least 10 priced listings. % is versus the $100 national median.

Replacement cost

What is the Chevy Impala ABS module replacement cost?

ESTIMATE
Used part
$100
Chevy Impala median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$195–$550
median used part + labor

Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Impala ABS Module

$

Current avg: $130 — we suggest $111 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2020)

adaptive cruise (opt KSG)38 listingsInterchange 2017–2020$136$39 – $281
w/o adaptive cruise38 listingsInterchange 2017–2020$75$75 – $232

Model-year comparison

What does a Chevy Impala ABS module cost by year?

$85$96$108$120$131201520162017201820192020
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Impala ABS module cost?

Asking prices for a used Chevy Impala ABS module are unusually spread out: the top listing asks about 9 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 85% premium over grade-C stock, with grade-A medians at $139.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, w/o adaptive cruise, lists at a $75 median, while adaptive cruise (opt KSG) commands $136, a 81% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $94, while 2016 tops the table at $125. Parts from 2012–2016 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Chevy Impala sits 33% below the Honda Civic ($150), 44% below the Honda CRV ($180), and 32% below the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ABS module: what to check

  1. Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
  2. Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
  3. Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
  4. Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
  5. Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.

Keep browsing this vehicle

What other Chevy Impala parts are priced?

Price comparisons

Compare Chevy Impala ABS module prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Impala ABS module FAQ

How much is a used ABS module for a Chevy Impala?

The median asking price is $100 across 512 priced listings from 398 yards. Grade-A units, the cleanest stock, have a median of $139. 2015 is the cheapest model year we track, with a median of $94.

How much does it cost to replace a Chevy Impala ABS module?

Using a used part, a Chevy Impala ABS module replacement typically runs $195–$550 all-in: the median used ABS module for this model lists at $100, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Impala model years does this price guide cover?

This guide currently has year-level pricing for 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Impala ABS module years are interchangeable?

Salvage-yard interchange data links Chevy Impala ABS module fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020. Searching all 9 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Impala ABS Module Cost — From $39 to $345