Used Chevy Trax ABS module from a salvage yard

Vehicle-specific price guide

How much is a used Chevy Trax ABS module?

Asking prices from 120 salvage yards in 12 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 23, 2026
Strong coverage588 priced of 723 observed2 variantsMethodology v2.1 →

Part overview

About the Chevy Trax ABS module

What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →

Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary

A used Chevy Trax ABS module costs $30 to $335, with a median asking price of $101. Based on 588 priced salvage yard listings across the US, compatible across 2015–2025 (10 model years), updated Sep 23, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$110
Grade B (good)$95
Grade C (fair)$85

Chevy Trax ABS module price snapshot

USD
Low
$30
Average
$130
High
$335
723 listings observed · 588 priced1mo ago· How we price·

Report incorrect price

Reporting price for Chevy Trax ABS Module

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$30–$335476 listings
Grade BStandard used$55–$27255 listings
Grade CVisible wear$67–$852 listings
Grade XUngraded$40–$15055 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $30–$335 overall range

Regional supply

Where the Chevy Trax ABS module is listed

We found priced Chevy Trax ABS module listings at 120 salvage yards across 12 states. Arizona supplies the most, with 136 listings (23% of the total) from 22 yards. Location matters: yards in Utah ask a median $60, while Illinois yards ask $137, 128% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Arizona13622$101
California12934$100-1%
Florida12819$130+29%
Texas9121$100-1%
Illinois456$137+36%
Nevada214$110+9%
New Mexico173$87-14%
Utah115$60-41%

States with at least 10 priced listings. % is versus the $101 national median.

Replacement cost

What is the Chevy Trax ABS module replacement cost?

ESTIMATE
Used part
$101
Chevy Trax median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$195–$550
median used part + labor

Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Trax ABS Module

$

Current avg: $130 — we suggest $111 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2020)

(assembly), active brake control (opt JL4)45 listingsInterchange 2017–2022$100$50 – $310
(assembly), w/o active brake control35 listingsInterchange 2017–2020$73$45 – $150

Model-year comparison

What does a Chevy Trax ABS module cost by year?

$80$110$141$171$2022015201620172018201920202021202220242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Trax ABS module cost?

Asking prices for a used Chevy Trax ABS module are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 29% premium over grade-C stock, with grade-A medians at $110.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (assembly), w/o active brake control, lists at a $73 median, while (assembly), active brake control (opt JL4) commands $100, a 37% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $89, while 2017 tops the table at $192. Parts from 2015–2016 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 2 compatible years.

Against comparable vehicles, the Chevy Trax sits 33% below the Honda Civic ($150), 44% below the Honda CRV ($180), and 31% below the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ABS module: what to check

  1. Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
  2. Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
  3. Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
  4. Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
  5. Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.

Keep browsing this vehicle

What other Chevy Trax parts are priced?

Price comparisons

Compare Chevy Trax ABS module prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Trax ABS module FAQ

How much is a used ABS module for a Chevy Trax?

The median asking price is $101 across 588 priced listings from 120 yards. Grade-A units, the cleanest stock, have a median of $110. 2016 is the cheapest model year we track, with a median of $89.

How much does it cost to replace a Chevy Trax ABS module?

Using a used part, a Chevy Trax ABS module replacement typically runs $195–$550 all-in: the median used ABS module for this model lists at $101, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Trax model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Trax ABS module years are interchangeable?

Salvage-yard interchange data links Chevy Trax ABS module fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2024, 2025. Searching all 10 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Trax ABS Module Cost — From $30 to $335