Used Chevy Malibu ABS module from a salvage yard

Vehicle-specific price guide

How much is a used Chevy Malibu ABS module?

Asking prices from 227 salvage yards in 25 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 23, 2026
Strong coverage1,147 priced of 1,477 observed4 variantsMethodology v2.1 →

Part overview

About the Chevy Malibu ABS module

What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →

Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary

A used Chevy Malibu ABS module costs $30 to $410, with a median asking price of $119. Based on 1,147 priced salvage yard listings across the US, compatible across 2012–2025 (14 model years), updated Sep 23, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$110
Grade B (good)$190

Chevy Malibu ABS module price snapshot

USD
Low
$30
Average
$137
High
$410
1,477 listings observed · 1,147 priced1mo ago· How we price·

Report incorrect price

Reporting price for Chevy Malibu ABS Module

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$30–$410730 listings
Grade BStandard used$40–$405285 listings
Grade XUngraded$39–$200132 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $30–$410 overall range

Regional supply

Where the Chevy Malibu ABS module is listed

We found priced Chevy Malibu ABS module listings at 227 salvage yards across 25 states. Arizona supplies the most, with 233 listings (20% of the total) from 20 yards. Location matters: yards in Arizona ask a median $99, while Texas yards ask $190, 92% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Arizona23320$99-17%
Texas22928$190+60%
California22152$100-16%
Illinois19721$162+36%
Florida9413$100-16%
Michigan3519$182+53%
Indiana3412$100-16%
Nevada276$101-15%

States with at least 10 priced listings. % is versus the $119 national median.

Replacement cost

What is the Chevy Malibu ABS module replacement cost?

ESTIMATE
Used part
$119
Chevy Malibu median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$215–$570
median used part + labor

Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Malibu ABS Module

$

Current avg: $137 — we suggest $116 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2022)

w/o forward collision warning; ID 8444246230 listingsInterchange 2019–2022$120$40 – $272
w/o forward collision warning; ID 847672807 listingsInterchange 2019–2022$75$50 – $80
forward collision warning (opt UGN)6 listingsInterchange 2019–2022$116$85 – $191

Model-year comparison

What does a Chevy Malibu ABS module cost by year?

$74$106$138$170$20320152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Malibu ABS module cost?

Asking prices for a used Chevy Malibu ABS module are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, w/o forward collision warning; ID 84767280, lists at a $75 median, while w/o forward collision warning; ID 84442462 commands $120, a 60% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $82, while 2025 tops the table at $193. Parts from 2012–2016 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Chevy Malibu sits 21% below the Honda Civic ($150), 34% below the Honda CRV ($180), and 18% below the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ABS module: what to check

  1. Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
  2. Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
  3. Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
  4. Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
  5. Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.

Keep browsing this vehicle

What other Chevy Malibu parts are priced?

Price comparisons

Compare Chevy Malibu ABS module prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Malibu ABS module FAQ

How much is a used ABS module for a Chevy Malibu?

The median asking price is $119 across 1,147 priced listings from 227 yards. Grade-A units, the cleanest stock, have a median of $110. 2015 is the cheapest model year we track, with a median of $82.

How much does it cost to replace a Chevy Malibu ABS module?

Using a used part, a Chevy Malibu ABS module replacement typically runs $215–$570 all-in: the median used ABS module for this model lists at $119, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Malibu model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Malibu ABS module years are interchangeable?

Salvage-yard interchange data links Chevy Malibu ABS module fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 14 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Malibu ABS Module Cost — From $30 to $410