Used Chevy Camaro ABS module from a salvage yard

Vehicle-specific price guide

How much is a used Chevy Camaro ABS module?

Asking prices from 596 salvage yards in 45 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 29, 2026
Strong coverage1,068 priced of 1,152 observed2 variantsMethodology v2.1 →

Part overview

About the Chevy Camaro ABS module

What the ABS module does, common failure signs, and prices across all vehicles: used ABS module price guide →

Also known asABS PumpABS Control ModuleEBCMABS Unit
Price summary

A used Chevy Camaro ABS module costs $34 to $500, with a median asking price of $185. Based on 1,068 priced salvage yard listings across the US, compatible across 2012–2024 (13 model years), updated Oct 29, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$187
Grade B (good)$177
Grade C (fair)$75

Chevy Camaro ABS module price snapshot

USD
Low
$34
Average
$173
High
$500
1,152 listings observed · 1,068 pricedUpdated 2h ago· How we price·

Report incorrect price

Reporting price for Chevy Camaro ABS Module

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$34–$500943 listings
Grade BStandard used$75–$28296 listings
Grade CVisible wear$75–$752 listings
Grade XUngraded$40–$15027 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $34–$500 overall range

Regional supply

Where the Chevy Camaro ABS module is listed

We found priced Chevy Camaro ABS module listings at 596 salvage yards across 45 states. Illinois supplies the most, with 460 listings (10% of the total) from 27 yards. Location matters: yards in California ask a median $80, while Illinois yards ask $195, 144% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Illinois46027$195+5%
Michigan40343$193+4%
North Carolina28838$155-16%
Florida27030$111-40%
Texas26841$121-35%
California23042$80-57%
Ohio20926$109-41%
Tennessee20720$111-40%

States with at least 10 priced listings. % is versus the $185 national median.

Replacement cost

What is the Chevy Camaro ABS module replacement cost?

ESTIMATE
Used part
$185
Chevy Camaro median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$280–$635
median used part + labor

Labor is a typical independent-shop range for ABS module replacement, not a quote for your vehicle; it does not include brake fluid flush and module programming if required. The part price is the live median from the salvage-yard listings on this page. How we price

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Camaro ABS Module

$

Current avg: $173 — we suggest $147 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2024)

ID 8482090848 listingsInterchange 2019–2023$215$75 – $264
ID 8445277947 listingsInterchange 2019–2024$187$75 – $264

Model-year comparison

What does a Chevy Camaro ABS module cost by year?

$108$132$155$179$2032015201620172018201920202021202220232024
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Chevy Camaro ABS module cost?

Asking prices for a used Chevy Camaro ABS module are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 149% premium over grade-C stock, with grade-A medians at $187.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, ID 84452779, lists at a $187 median, while ID 84820908 commands $215, a 15% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $120, while 2019 tops the table at $193. Parts from 2012–2015 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 4 compatible years.

Against comparable vehicles, the Chevy Camaro sits 23% above the Honda Civic ($150), 3% above the Honda CRV ($180), and 27% above the Nissan Rogue ($146) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used ABS module: what to check

  1. Verify option code compatibility: Exact matching of vehicle traction control, stability control, and wheel-speed sensor options is required because mismatched modules cannot be recoded.
  2. Inspect connector pins for liquid intrusion: Check for green copper oxidation, melted pin housings, or burnt traces inside the harness plug caused by leaking brake fluid.
  3. Confirm hydraulic block port sealing: Ensure all hydraulic line ports remained capped during storage to prevent internal solenoid valve corrosion and dirt contamination.
  4. Purchase pump and ECU together: Buying the combined hydraulic block and electronic control unit prevents internal seal damage caused by bench separation.
  5. Plan for bi-directional scan tool bleeding: Budget time for an automated scan tool system bleed and steering angle sensor calibration immediately after installation.

Keep browsing this vehicle

What other Chevy Camaro parts are priced?

Price comparisons

Compare Chevy Camaro ABS module prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Camaro ABS module FAQ

How much is a used ABS module for a Chevy Camaro?

The median asking price is $185 across 1,068 priced listings from 596 yards. Grade-A units, the cleanest stock, have a median of $187. 2015 is the cheapest model year we track, with a median of $120.

How much does it cost to replace a Chevy Camaro ABS module?

Using a used part, a Chevy Camaro ABS module replacement typically runs $280–$635 all-in: the median used ABS module for this model lists at $185, and independent-shop labor for ABS module replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include brake fluid flush and module programming if required. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Camaro model years does this price guide cover?

This guide currently has year-level pricing for 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Camaro ABS module years are interchangeable?

Salvage-yard interchange data links Chevy Camaro ABS module fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Camaro ABS Module Cost — From $34 to $500