Used Jeep Wrangler control arm from a salvage yard

Vehicle-specific price guide

How much is a used Jeep Wrangler control arm?

Asking prices from 92 salvage yards in 23 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026
Strong coverage491 priced of 545 observed2 variantsMethodology v2.1 →

Part overview

About the Jeep Wrangler control arm

What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →

Also known asLower Control ArmA-ArmWishbone
Price summary

A used Jeep Wrangler control arm costs $40 to $319, with a median asking price of $177. Based on 491 priced salvage yard listings across the US, compatible across 2007–2025 (19 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$177
Grade B (good)$205

Jeep Wrangler control arm price snapshot

USD
Low
$40
Average
$160
High
$319
545 listings observed · 491 priced9d ago· How we price·

Report incorrect price

Reporting price for Jeep Wrangler Control Arm

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$40–$319430 listings
Grade BStandard used$80–$26229 listings
Grade XUngraded$49–$12032 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $40–$319 overall range

Regional supply

Where the Jeep Wrangler control arm is listed

We found priced Jeep Wrangler control arm listings at 92 salvage yards across 23 states. California supplies the most, with 126 listings (19% of the total) from 13 yards. Location matters: yards in Michigan ask a median $50, while South Carolina yards ask $298, 496% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California12613$100-44%
Florida12013$260+47%
Michigan1148$50-72%
Indiana865$200+13%
Wisconsin355$199+12%
South Carolina211$298+68%
Illinois193$80-55%
Colorado194$149-16%

States with at least 10 priced listings. % is versus the $177 national median.

Replacement cost

What is the Jeep Wrangler control arm replacement cost?

ESTIMATE
Used part
$177
Jeep Wrangler median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$270–$625
median used part + labor

Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Jeep Wrangler Control Arm

$

Current avg: $160 — we suggest $136 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2018)

(LHD), VIN W (6th digit, JK body)20 listingsInterchange 2007–2018$74$50 – $260
(LHD), VIN X (6th digit, JL body)11 listingsInterchange 2019–2025$276$65 – $308

Model-year comparison

What does a Jeep Wrangler control arm cost by year?

$68$119$171$223$27520152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Jeep Wrangler control arm cost?

Asking prices for a used Jeep Wrangler control arm are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (LHD), VIN W (6th digit, JK body), lists at a $74 median, while (LHD), VIN X (6th digit, JL body) commands $276, a 273% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $75, while 2020 tops the table at $262. Parts from 2014–2018 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Jeep Wrangler sits 8% below the Toyota 4Runner ($193), 2% below the Mercedes S Class ($180), and 77% above the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used control arm: what to check

  1. Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
  2. Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
  3. Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
  4. Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
  5. Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.

Keep browsing this vehicle

What other Jeep Wrangler parts are priced?

Price comparisons

Compare Jeep Wrangler control arm prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Jeep Wrangler control arm FAQ

How much is a used control arm for a Jeep Wrangler?

The median asking price is $177 across 491 priced listings from 92 yards. Grade-A units, the cleanest stock, have a median of $177. 2015 is the cheapest model year we track, with a median of $75.

How much does it cost to replace a Jeep Wrangler control arm?

Using a used part, a Jeep Wrangler control arm replacement typically runs $270–$625 all-in: the median used control arm for this model lists at $177, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.

Which Jeep Wrangler model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Jeep Wrangler control arm years are interchangeable?

Salvage-yard interchange data links Jeep Wrangler control arm fitments across 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 19 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Jeep Wrangler Control Arm Cost — From $40 to $319