Chrysler 300 drive shaft price snapshot
- Low
- $147
- Average
- $583
- High
- $1,362
Vehicle-specific price guide
How much is a used Chrysler 300 drive shaft?
Asking prices from 306 salvage yards in 39 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 29, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Chrysler 300 drive shaft
What the drive shaft does, common failure signs, and prices across all vehicles: used drive shaft price guide →
Also known asDriveshaftPropeller ShaftProp Shaft
Price summary
A used Chrysler 300 drive shaft costs $147 to $1,362, with a median asking price of $550. Based on 1,028 priced salvage yard listings across the US, compatible across 2015–2023 (9 model years), updated Oct 29, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$552
Grade B (good)$391
Grade C (fair)$245
USD
Condition comparison
Price by part grade
Grade AClean / low wear$150–$922552 listings
Grade BStandard used$147–$807285 listings
Grade CVisible wear$245–$2455 listings
Grade XUngraded$150–$1,362186 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $150–$922 | 552 | |
| Grade BStandard used | $147–$807 | 285 | |
| Grade CVisible wear | $245–$245 | 5 | |
| Grade XUngraded | $150–$1,362 | 186 |
Median by grade
Grade price comparison
Grade A$552
Grade B$391
Grade C$245
Ungraded$1,050
Median asking price by seller-reported condition grade · $147–$1,362 overall range
Regional supply
Where the Chrysler 300 drive shaft is listed
We found priced Chrysler 300 drive shaft listings at 306 salvage yards across 39 states. Michigan supplies the most, with 294 listings (9% of the total) from 22 yards. Location matters: yards in Florida ask a median $203, while Wisconsin yards ask $552, 172% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Michigan | 294 | 22 | $550 |
| New York | 265 | 22 | $525-5% |
| Illinois | 247 | 17 | $400-27% |
| Florida | 217 | 10 | $203-63% |
| California | 181 | 11 | $263-52% |
| Indiana | 144 | 15 | $490-11% |
| Wisconsin | 135 | 14 | $552 |
| Texas | 124 | 10 | $216-61% |
States with at least 10 priced listings. % is versus the $550 national median.
Replacement cost
What is the Chrysler 300 drive shaft replacement cost?
- Used part
- $550
- Chrysler 300 median asking price
- Labor
- $95–$450
- 1–3 hours at $95–$150/hr
- Estimated total
- $645–$1,000
- median used part + labor
Labor is a typical independent-shop range for drive shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. Full drive shaft replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Chrysler 300 drive shaft cost by year?
2023166 listingsFits 9 years$500$147 – $1,0002022133 listingsFits 9 years$500$147 – $1,0002021133 listingsFits 9 years$500$147 – $1,0002019150 listingsFits 9 years$567$147 – $1,3622018150 listingsFits 9 years$552$147 – $1,3622017150 listingsFits 9 years$550$147 – $1,3622016150 listingsFits 9 years$552$147 – $1,3622015150 listingsFits 9 years$567$147 – $1,362
Market analysis
How much does a used Chrysler 300 drive shaft cost?
Asking prices for a used Chrysler 300 drive shaft are unusually spread out: the top listing asks about 9 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 125% premium over grade-C stock, with grade-A medians at $552.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 3.6L (195mm), RWD, lists at a $364 median, while 3.6L (195mm), AWD commands $667, a 83% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2021 units carry the lowest median at $500, while 2015 tops the table at $567. Parts from 2015–2023 are interchangeable, so if the 2021 fits your vehicle, it offers the best value across 9 compatible years.
Against comparable vehicles, the Chrysler 300 sits 189% above the Ram 1500 ($190), 141% above the Chevy Silverado 1500 ($228), and 126% above the GMC Sierra 1500 ($243) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used drive shaft: what to check
- Flex universal joints and CV boots: Articulate each U-joint by hand to check for stiff binding, rusted needle bearings, or torn rubber constant-velocity boots.
- Inspect slip yoke splines and balance weights: Check male splines for twisting or galling, and verify that welded steel balance weights are present along the tube.
- Examine center carrier bearing rubber: Inspect two-piece driveshaft center bearings for cracked rubber mounting rings or noisy, dry support bearings.
- Measure overall compressed length: Verify flange-to-flange operating length exactly, as transmission options and wheelbase variations alter shaft dimensions.
- Index flange alignment before installation: Mark mating yokes to the differential flange before installation to prevent high-speed driveline vibration.
Keep browsing this vehicle
What other Chrysler 300 parts are priced?
01wide ±176%
Wheels
$175median
$45$662
02wide ±150%
Control Arm
$80median
$30$270
03wide ±207%
Grille
$132median
$22$569
04wide ±194%
Side Mirror
$135median
$35$560
05wide ±126%
Transmission Control Module
$125median
$21$335
06wide ±278%
Brake Caliper
$75median
$25$442
07wide ±111%
Steering Column
$171median
$40$420
08wide ±115%
Headlight Assembly
$418median
$142$1,100
09wide ±230%
Axle Shaft
$100median
$34$493
10wide ±222%
Fog Light
$146median
$25$672
11wide ±261%
Car Radio
$207median
$50$1,131
12wide ±142%
Front Seat
$176median
$50$550
Price comparisons
Compare Chrysler 300 drive shaft prices
Drive Shaftcompare
Ram1500vsChrysler300
1500$190
300$550
$360 diff20,791 listings
Drive ShaftcompareChevySilverado1500vsChrysler300
1500$228
300$550
$322 diff20,005 listings
Drive ShaftcompareGMCSierra1500vsChrysler300
1500$243
300$550
$307 diff16,560 listings
Drive ShaftcompareFordF150vsChrysler300
F150$240
300$550
$310 diff14,954 listings
Drive ShaftcompareFordF250vsChrysler300
F250$285
300$550
$265 diff10,791 listings
Drive ShaftcompareRam3500vsChrysler300
3500$431
300$550
$119 diff8,326 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±154%
Acura MDX
$232median
$75$788
Acurawide ±113%
Acura RDX
$173median
$60$450
Acurawide ±233%
Acura TLX
$209median
$60$1,036
Audiwide ±124%
Audi A4
$170median
$50$470
Audiwide ±142%
Audi A6
$180median
$54$566
Audiwide ±116%
Audi Q3
$186median
$65$495
Audiwide ±194%
Audi Q5
$269median
$55$1,100
Audiwide ±110%
Audi Q7
$300median
$81$740
BMWwide ±145%
BMW 330i
$250median
$76$800
BMWwide ±175%
BMW 530i
$250median
$70$947
Chryslerwide ±74%
Chrysler Pacifica
$300median
$100$545
Chrysler
Chrysler Voyager
Price data updating
Common questions
Chrysler 300 drive shaft FAQ
How much is a used drive shaft for a Chrysler 300?
The median asking price is $550 across 1,028 priced listings from 306 yards. Grade-A units, the cleanest stock, have a median of $552. 2023 is the cheapest model year we track, with a median of $500.
How much does it cost to replace a Chrysler 300 drive shaft?
Using a used part, a Chrysler 300 drive shaft replacement typically runs $645–$1,000 all-in: the median used drive shaft for this model lists at $550, and independent-shop labor for drive shaft replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). Labor is a national part-level estimate, not a quote for your vehicle.
Which Chrysler 300 model years does this price guide cover?
This guide currently has year-level pricing for 2023, 2022, 2021, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Chrysler 300 drive shaft years are interchangeable?
Salvage-yard interchange data links Chrysler 300 drive shaft fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023. Searching all 9 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.