Ford Fusion drive shaft price snapshot
- Low
- $60
- Average
- $216
- High
- $500
Vehicle-specific price guide
How much is a used Ford Fusion drive shaft?
Asking prices from 162 salvage yards in 33 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Ford Fusion drive shaft
What the drive shaft does, common failure signs, and prices across all vehicles: used drive shaft price guide →
Also known asDriveshaftPropeller ShaftProp Shaft
Price summary
A used Ford Fusion drive shaft costs $60 to $500, with a median asking price of $195. Based on 301 priced salvage yard listings across the US, compatible across 2013–2020 (8 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$230
Grade B (good)$125
Grade C (fair)$125
USD
Condition comparison
Price by part grade
Grade AClean / low wear$68–$500249 listings
Grade BStandard used$61–$33545 listings
Grade CVisible wear$125–$1252 listings
Grade XUngraded$60–$1505 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $68–$500 | 249 | |
| Grade BStandard used | $61–$335 | 45 | |
| Grade CVisible wear | $125–$125 | 2 | |
| Grade XUngraded | $60–$150 | 5 |
Median by grade
Grade price comparison
Grade A$230
Grade B$125
Grade C$125
Ungraded$150
Median asking price by seller-reported condition grade · $60–$500 overall range
Regional supply
Where the Ford Fusion drive shaft is listed
We found priced Ford Fusion drive shaft listings at 162 salvage yards across 33 states. Florida supplies the most, with 99 listings (18% of the total) from 12 yards. Location matters: yards in New York ask a median $109, while Tennessee yards ask $215, 97% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Florida | 99 | 12 | $130-33% |
| Texas | 59 | 13 | $153-22% |
| Tennessee | 35 | 9 | $215+10% |
| Illinois | 31 | 9 | $195 |
| New York | 29 | 8 | $109-44% |
| Indiana | 27 | 8 | $178-9% |
| Kentucky | 21 | 3 | $166-15% |
| Michigan | 20 | 11 | $206+6% |
States with at least 10 priced listings. % is versus the $195 national median.
Replacement cost
What is the Ford Fusion drive shaft replacement cost?
- Used part
- $195
- Ford Fusion median asking price
- Labor
- $95–$450
- 1–3 hours at $95–$150/hr
- Estimated total
- $290–$645
- median used part + labor
Labor is a typical independent-shop range for drive shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. Full drive shaft replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Ford Fusion drive shaft cost by year?
Market analysis
How much does a used Ford Fusion drive shaft cost?
Asking prices for a used Ford Fusion drive shaft are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 84% premium over grade-C stock, with grade-A medians at $230.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (AWD), 2.0L, (VIN 9, 8th digit, turbo), lists at a $195 median, while (AWD), 2.7L commands $276, a 42% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2020 units carry the lowest median at $130, while 2017 tops the table at $275. Parts from 2013–2020 are interchangeable, so if the 2020 fits your vehicle, it offers the best value across 8 compatible years.
Against comparable vehicles, the Ford Fusion sits 3% above the Ram 1500 ($190), 14% below the Chevy Silverado 1500 ($228), and 20% below the GMC Sierra 1500 ($243) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used drive shaft: what to check
- Flex universal joints and CV boots: Articulate each U-joint by hand to check for stiff binding, rusted needle bearings, or torn rubber constant-velocity boots.
- Inspect slip yoke splines and balance weights: Check male splines for twisting or galling, and verify that welded steel balance weights are present along the tube.
- Examine center carrier bearing rubber: Inspect two-piece driveshaft center bearings for cracked rubber mounting rings or noisy, dry support bearings.
- Measure overall compressed length: Verify flange-to-flange operating length exactly, as transmission options and wheelbase variations alter shaft dimensions.
- Index flange alignment before installation: Mark mating yokes to the differential flange before installation to prevent high-speed driveline vibration.
Keep browsing this vehicle
What other Ford Fusion parts are priced?
01wide ±185%
Tail Light
$85median
$30$345
02wide ±228%
Grille
$161median
$30$765
03wide ±273%
Wheels
$139median
$30$790
04wide ±125%
Transmission
$1,624median
$532$4,596
05wide ±147%
Axle Shaft
$110median
$20$343
06wide ±193%
Side Mirror
$158median
$30$640
07wide ±180%
AC Compressor
$89median
$30$350
08wide ±218%
Alternator
$85median
$20$390
09wide ±117%
Fender
$200median
$75$541
10wide ±241%
Radiator
$110median
$20$550
11wide ±197%
Strut
$75median
$25$320
12wide ±141%
Headlight Assembly
$469median
$81$1,400
Price comparisons
Compare Ford Fusion drive shaft prices
Drive Shaftcompare
FordF150vsFordFusion
F150$240
Fusion$195
$45 diff14,227 listings
Drive ShaftcompareFordF250vsFordFusion
F250$295
Fusion$195
$100 diff10,804 listings
Drive ShaftcompareRam3500vsFordFusion
3500$431
Fusion$195
$236 diff7,599 listings
Drive ShaftcompareRam2500vsFordFusion
2500$295
Fusion$195
$100 diff5,866 listings
Drive ShaftcompareChevyColoradovsFordFusion
Colorado$197
Fusion$195
$2 diff4,535 listings
Drive ShaftcompareChevyCamarovsFordFusion
Camaro$195
Fusion$195
$0 diff3,585 listings
Compare fitments
What do similar vehicles charge for this part?
Fordwide ±83%
Ford Bronco
$330median
$132$681
Fordwide ±61%
Ford Bronco Sport
$213median
$99$359
Fordwide ±141%
Ford Edge
$175median
$50$544
Fordwide ±136%
Ford Escape
$182median
$51$545
Fordwide ±121%
Ford Expedition
$211median
$61$570
Fordwide ±173%
Ford Explorer
$163median
$51$615
Fordwide ±187%
Ford F150
$240median
$59$957
Fordwide ±160%
Ford F250
$295median
$84$1,030
Fordwide ±81%
Ford Focus
$238median
$115$500
Fordwide ±105%
Ford Maverick
$221median
$100$562
Fordwide ±174%
Ford Mustang
$215median
$57$804
Fordwide ±84%
Ford Ranger
$173median
$75$365
Common questions
Ford Fusion drive shaft FAQ
How much is a used drive shaft for a Ford Fusion?
The median asking price is $195 across 301 priced listings from 162 yards. Grade-A units, the cleanest stock, have a median of $230. 2020 is the cheapest model year we track, with a median of $130.
How much does it cost to replace a Ford Fusion drive shaft?
Using a used part, a Ford Fusion drive shaft replacement typically runs $290–$645 all-in: the median used drive shaft for this model lists at $195, and independent-shop labor for drive shaft replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). Labor is a national part-level estimate, not a quote for your vehicle.
Which Ford Fusion model years does this price guide cover?
This guide currently has year-level pricing for 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Ford Fusion drive shaft years are interchangeable?
Salvage-yard interchange data links Ford Fusion drive shaft fitments across 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020. Searching all 8 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.