Used Ford Explorer drive shaft from a salvage yard

Vehicle-specific price guide

How much is a used Ford Explorer drive shaft?

Asking prices from 261 salvage yards in 33 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 23, 2026
Strong coverage2,010 priced of 2,355 observed5 variantsMethodology v2.1 →

Part overview

About the Ford Explorer drive shaft

What the drive shaft does, common failure signs, and prices across all vehicles: used drive shaft price guide →

Also known asDriveshaftPropeller ShaftProp Shaft
Price summary

A used Ford Explorer drive shaft costs $51 to $615, with a median asking price of $163. Based on 2,010 priced salvage yard listings across the US, compatible across 2009–2026 (18 model years), updated Sep 23, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$161
Grade B (good)$148

Ford Explorer drive shaft price snapshot

USD
Low
$51
Average
$183
High
$615
2,355 listings observed · 2,010 priced1mo ago· How we price·

Report incorrect price

Reporting price for Ford Explorer Drive Shaft

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$51–$6151,233 listings
Grade BStandard used$71–$510573 listings
Grade XUngraded$85–$445204 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $51–$615 overall range

Regional supply

Where the Ford Explorer drive shaft is listed

We found priced Ford Explorer drive shaft listings at 261 salvage yards across 33 states. California supplies the most, with 574 listings (28% of the total) from 48 yards. Location matters: yards in Georgia ask a median $126, while Indiana yards ask $225, 79% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California57448$148-9%
Florida39623$150-8%
Texas30231$153-6%
Illinois14122$212+30%
Arizona1198$225+38%
Indiana808$225+38%
Utah668$158-3%
Georgia5215$126-23%

States with at least 10 priced listings. % is versus the $163 national median.

Replacement cost

What is the Ford Explorer drive shaft replacement cost?

ESTIMATE
Used part
$163
Ford Explorer median asking price
Labor
$95–$450
1–3 hours at $95–$150/hr
Estimated total
$260–$615
median used part + labor

Labor is a typical independent-shop range for drive shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. Full drive shaft replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Ford Explorer Drive Shaft

$

Current avg: $183 — we suggest $156 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

(assembly), 2.3L, 4x236 listingsInterchange 2020–2025$148$85 – $356
(assembly), 3.0L, 4x236 listingsInterchange 2020–2025$148$85 – $356
(assembly), 3.3L, 4x435 listings$246$125 – $420
(assembly), 2.3L, 4x432 listingsInterchange 2025–2026$246$100 – $398
(assembly), 3.0L, 4x412 listings$300$222 – $370

Model-year comparison

What does a Ford Explorer drive shaft cost by year?

$132$164$196$228$25920152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Ford Explorer drive shaft cost?

Asking prices for a used Ford Explorer drive shaft are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 9% premium over grade-B stock, with grade-A medians at $161.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (assembly), 2.3L, 4x2, lists at a $148 median, while (assembly), 3.0L, 4x4 commands $300, a 103% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $147, while 2017 tops the table at $247. Parts from 2015–2019 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Ford Explorer sits 14% below the Ram 1500 ($190), 29% below the Chevy Silverado 1500 ($228), and 33% below the GMC Sierra 1500 ($243) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used drive shaft: what to check

  1. Flex universal joints and CV boots: Articulate each U-joint by hand to check for stiff binding, rusted needle bearings, or torn rubber constant-velocity boots.
  2. Inspect slip yoke splines and balance weights: Check male splines for twisting or galling, and verify that welded steel balance weights are present along the tube.
  3. Examine center carrier bearing rubber: Inspect two-piece driveshaft center bearings for cracked rubber mounting rings or noisy, dry support bearings.
  4. Measure overall compressed length: Verify flange-to-flange operating length exactly, as transmission options and wheelbase variations alter shaft dimensions.
  5. Index flange alignment before installation: Mark mating yokes to the differential flange before installation to prevent high-speed driveline vibration.

Keep browsing this vehicle

What other Ford Explorer parts are priced?

Price comparisons

Compare Ford Explorer drive shaft prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Ford Explorer drive shaft FAQ

How much is a used drive shaft for a Ford Explorer?

The median asking price is $163 across 2,010 priced listings from 261 yards. Grade-A units, the cleanest stock, have a median of $161. 2016 is the cheapest model year we track, with a median of $147.

How much does it cost to replace a Ford Explorer drive shaft?

Using a used part, a Ford Explorer drive shaft replacement typically runs $260–$615 all-in: the median used drive shaft for this model lists at $163, and independent-shop labor for drive shaft replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). Labor is a national part-level estimate, not a quote for your vehicle.

Which Ford Explorer model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Ford Explorer drive shaft years are interchangeable?

Salvage-yard interchange data links Ford Explorer drive shaft fitments across 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 18 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Ford Explorer Drive Shaft Cost — From $51 to $615