Used Mercedes C Class intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used Mercedes C Class intake manifold?

Asking prices from 172 salvage yards in 34 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026
Strong coverage1,022 priced of 1,654 observed7 variantsMethodology v2.1 →

Part overview

About the Mercedes C Class intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used Mercedes C Class intake manifold costs $20 to $550, with a median asking price of $113. Based on 1,022 priced salvage yard listings across the US, compatible across 2012–2023 (12 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$100
Grade B (good)$286
Grade C (fair)$56

Mercedes C Class intake manifold price snapshot

USD
Low
$20
Average
$148
High
$550
1,654 listings observed · 1,022 priced11d ago· How we price·

Report incorrect price

Reporting price for Mercedes C Class Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$25–$550658 listings
Grade BStandard used$75–$425215 listings
Grade CVisible wear$40–$12537 listings
Grade XUngraded$20–$300112 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $20–$550 overall range

Regional supply

Where the Mercedes C Class intake manifold is listed

We found priced Mercedes C Class intake manifold listings at 172 salvage yards across 34 states. California supplies the most, with 240 listings (20% of the total) from 20 yards. Location matters: yards in Illinois ask a median $65, while North Carolina yards ask $286, 340% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California24020$75-34%
Florida8721$125+11%
Texas867$114+1%
North Carolina7212$286+153%
Michigan686$146+29%
Illinois674$65-42%
Indiana642$100-12%
New Jersey497$95-16%

States with at least 10 priced listings. % is versus the $113 national median.

Replacement cost

What is the Mercedes C Class intake manifold replacement cost?

ESTIMATE
Used part
$113
Mercedes C Class median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$305–$865
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Mercedes C Class Intake Manifold

$

Current avg: $148 — we suggest $126 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2023)

205 Type (Coupe and Convertible), C43, upper31 listingsInterchange 2015–2023$125$65 – $425
205 Type (Coupe and Convertible), C63s, LH10 listingsInterchange 2018–2021$264$99 – $286
205 Type (Coupe and Convertible), C43, lower, LH9 listingsInterchange 2015–2022$41$25 – $204
205 Type (Coupe and Convertible), C63s, RH8 listingsInterchange 2019–2020$286$149 – $286
205 Type (Coupe and Convertible), C3007 listingsInterchange 2019–2020$80$64 – $106
205 Type (Coupe and Convertible), C43, lower, RH7 listingsInterchange 2015–2020$49$25 – $204

206 Type (Sedan), C300

3 listings
Interchange 2022–2023$275$156 – $350

Model-year comparison

What does a Mercedes C Class intake manifold cost by year?

$68$104$141$178$214201520162017201820192020202120222023
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Mercedes C Class intake manifold cost?

Asking prices for a used Mercedes C Class intake manifold are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 79% premium over grade-C stock, with grade-A medians at $100.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 205 Type (Coupe and Convertible), C43, lower, LH, lists at a $41 median, while 205 Type (Coupe and Convertible), C63s, RH commands $286, a 598% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $75, while 2021 tops the table at $204. Parts from 2015–2023 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 9 compatible years.

Against comparable vehicles, the Mercedes C Class sits 38% below the Mercedes S Class ($181), 52% below the Ram 3500 ($235), and 10% below the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other Mercedes C Class parts are priced?

Price comparisons

Compare Mercedes C Class intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Mercedes C Class intake manifold FAQ

How much is a used intake manifold for a Mercedes C Class?

The median asking price is $113 across 1,022 priced listings from 172 yards. Grade-A units, the cleanest stock, have a median of $100. 2016 is the cheapest model year we track, with a median of $75.

How much does it cost to replace a Mercedes C Class intake manifold?

Using a used part, a Mercedes C Class intake manifold replacement typically runs $305–$865 all-in: the median used intake manifold for this model lists at $113, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which Mercedes C Class model years does this price guide cover?

This guide currently has year-level pricing for 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Mercedes C Class intake manifold years are interchangeable?

Salvage-yard interchange data links Mercedes C Class intake manifold fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Mercedes C Class Intake Manifold Cost — From $20 to $550