Mercedes GLE Class intake manifold price snapshot
- Low
- $25
- Average
- $144
- High
- $550
Vehicle-specific price guide
How much is a used Mercedes GLE Class intake manifold?
Asking prices from 174 salvage yards in 34 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 16, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Mercedes GLE Class intake manifold
What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →
Also known asInlet Manifold
Price summary
A used Mercedes GLE Class intake manifold costs $25 to $550, with a median asking price of $100. Based on 1,750 priced salvage yard listings across the US, compatible across 2012–2024 (13 model years), updated Oct 16, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$100
Grade B (good)$287
Grade C (fair)$56
USD
Condition comparison
Price by part grade
Grade AClean / low wear$25–$5501,351 listings
Grade BStandard used$76–$425182 listings
Grade CVisible wear$40–$18044 listings
Grade XUngraded$25–$300173 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $25–$550 | 1,351 | |
| Grade BStandard used | $76–$425 | 182 | |
| Grade CVisible wear | $40–$180 | 44 | |
| Grade XUngraded | $25–$300 | 173 |
Median by grade
Grade price comparison
Grade A$100
Grade B$287
Grade C$56
Ungraded$113
Median asking price by seller-reported condition grade · $25–$550 overall range
Regional supply
Where the Mercedes GLE Class intake manifold is listed
We found priced Mercedes GLE Class intake manifold listings at 174 salvage yards across 34 states. California supplies the most, with 572 listings (32% of the total) from 22 yards. Location matters: yards in Illinois ask a median $65, while North Carolina yards ask $286, 340% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 572 | 22 | $75-25% |
| Illinois | 143 | 10 | $65-35% |
| Michigan | 126 | 11 | $195+95% |
| Florida | 115 | 15 | $249+149% |
| Texas | 98 | 9 | $126+26% |
| Indiana | 86 | 5 | $100 |
| Iowa | 67 | 4 | $204+104% |
| North Carolina | 67 | 10 | $286+186% |
States with at least 10 priced listings. % is versus the $100 national median.
Replacement cost
What is the Mercedes GLE Class intake manifold replacement cost?
- Used part
- $100
- Mercedes GLE Class median asking price
- Labor
- $190–$750
- 2–5 hours at $95–$150/hr
- Estimated total
- $290–$850
- median used part + labor
Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
167 Type, GLE450e
2 listingsInterchange 2023–2024$376$300 – $376Model-year comparison
What does a Mercedes GLE Class intake manifold cost by year?
202546 listingsFits 4 years$256$50 – $376202446 listingsFits 3 years$256$50 – $3762023137 listingsFits 6 years$175$50 – $5502022115 listingsFits 6 years$177$50 – $550202180 listingsFits 6 years$243$50 – $550202087 listingsFits 6 years$150$75 – $5502019506 listingsFits 11 years$75$25 – $4002018758 listingsFits 11 years$75$25 – $4002017699 listingsFits 10 years$122$25 – $4302016317 listingsFits 10 years$126$25 – $400
Market analysis
How much does a used Mercedes GLE Class intake manifold cost?
Asking prices for a used Mercedes GLE Class intake manifold are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 79% premium over grade-C stock, with grade-A medians at $100.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 167 Type, GLE580, LH, lists at a $250 median, while 167 Type, GLE450e commands $376, a 50% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2018 units carry the lowest median at $75, while 2024 tops the table at $256. Parts from 2012–2023 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 11 compatible years.
Against comparable vehicles, the Mercedes GLE Class sits 45% below the Mercedes S Class ($181), 57% below the Ram 3500 ($235), and 21% below the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used intake manifold: what to check
- Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
- Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
- Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
- Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
- Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.
Keep browsing this vehicle
What other Mercedes GLE Class parts are priced?
01wide ±238%
Transmission Control Module
$145median
$25$714
02wide ±261%
Brake Caliper
$297median
$49$1,600
03wide ±159%
Axle Shaft
$287median
$50$962
04wide ±178%
Air Bag
$267median
$50$1,000
05wide ±231%
Car Radio
$284median
$50$1,364
06wide ±114%
Front Seat
$307median
$120$819
07wide ±275%
Radiator
$300median
$65$1,712
08wide ±160%
Wheels
$499median
$101$1,693
09wide ±79%
Control Arm
$319median
$100$603
10wide ±138%
Steering Column
$210median
$66$644
11wide ±95%
Strut
$621median
$118$1,300
12wide ±187%
Steering Wheel
$500median
$100$1,973
Price comparisons
Compare Mercedes GLE Class intake manifold prices
Intake Manifoldcompare
MercedesSClassvsMercedesGLEClass
Class$181
Class$100
$81 diff4,387 listings
Intake ManifoldcompareRam3500vsMercedesGLEClass
3500$235
Class$100
$135 diff3,847 listings
Intake ManifoldcompareMercedesEClassvsMercedesGLEClass
Class$126
Class$100
$26 diff3,701 listings
Intake ManifoldcompareMercedesGLEClassvsRam1500
Class$100
1500$135
$35 diff3,438 listings
Intake ManifoldcompareMercedesGLEClassvsFordExplorer
Class$100
Explorer$81
$19 diff3,313 listings
Intake ManifoldcompareMercedesGLEClassvsSubaruWRX
Class$100
WRX$125
$25 diff3,288 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±99%
Acura ILX
$125median
$30$278
Acurawide ±75%
Acura Integra
$56median
$36$120
Acurawide ±237%
Acura MDX
$99median
$30$500
Acurawide ±140%
Acura RDX
$75median
$25$235
Acurawide ±120%
Acura TLX
$110median
$38$303
Audiwide ±138%
Audi A4
$90median
$50$299
Mercedeswide ±235%
Mercedes C Class
$113median
$20$550
Mercedeswide ±159%
Mercedes E Class
$126median
$25$425
Mercedeswide ±124%
Mercedes GLA Class
$86median
$45$258
Mercedeswide ±226%
Mercedes GLC Class
$116median
$25$550
Mercedeswide ±135%
Mercedes S Class
$181median
$35$525
Mercedeswide ±157%
Mercedes Sprinter
$175median
$50$600
Common questions
Mercedes GLE Class intake manifold FAQ
How much is a used intake manifold for a Mercedes GLE Class?
The median asking price is $100 across 1,750 priced listings from 174 yards. Grade-A units, the cleanest stock, have a median of $100. 2019 is the cheapest model year we track, with a median of $75.
How much does it cost to replace a Mercedes GLE Class intake manifold?
Using a used part, a Mercedes GLE Class intake manifold replacement typically runs $290–$850 all-in: the median used intake manifold for this model lists at $100, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.
Which Mercedes GLE Class model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Mercedes GLE Class intake manifold years are interchangeable?
Salvage-yard interchange data links Mercedes GLE Class intake manifold fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.