Mercedes E Class intake manifold price snapshot
- Low
- $25
- Average
- $148
- High
- $425
Vehicle-specific price guide
How much is a used Mercedes E Class intake manifold?
Asking prices from 153 salvage yards in 32 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 15, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Mercedes E Class intake manifold
What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →
Also known asInlet Manifold
Price summary
A used Mercedes E Class intake manifold costs $25 to $425, with a median asking price of $126. Based on 1,951 priced salvage yard listings across the US, compatible across 2012–2023 (12 model years), updated Sep 15, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$123
Grade B (good)$387
Grade C (fair)$56
USD
Condition comparison
Price by part grade
Grade AClean / low wear$25–$4011,355 listings
Grade BStandard used$100–$425141 listings
Grade CVisible wear$40–$18085 listings
Grade XUngraded$25–$400370 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $25–$401 | 1,355 | |
| Grade BStandard used | $100–$425 | 141 | |
| Grade CVisible wear | $40–$180 | 85 | |
| Grade XUngraded | $25–$400 | 370 |
Median by grade
Grade price comparison
Grade A$123
Grade B$387
Grade C$56
Ungraded$126
Median asking price by seller-reported condition grade · $25–$425 overall range
Regional supply
Where the Mercedes E Class intake manifold is listed
We found priced Mercedes E Class intake manifold listings at 153 salvage yards across 32 states. California supplies the most, with 408 listings (21% of the total) from 18 yards. Location matters: yards in Illinois ask a median $65, while Michigan yards ask $350, 438% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 408 | 18 | $75-40% |
| Texas | 212 | 12 | $130+3% |
| Illinois | 147 | 6 | $65-48% |
| Florida | 120 | 17 | $95-25% |
| Indiana | 113 | 6 | $100-21% |
| North Carolina | 108 | 9 | $192+52% |
| Iowa | 88 | 3 | $204+62% |
| Michigan | 82 | 5 | $350+178% |
States with at least 10 priced listings. % is versus the $126 national median.
Replacement cost
What is the Mercedes E Class intake manifold replacement cost?
- Used part
- $126
- Mercedes E Class median asking price
- Labor
- $190–$750
- 2–5 hours at $95–$150/hr
- Estimated total
- $315–$875
- median used part + labor
Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
213 Type (Sedan and Wagon), E450 (integrated intercooler)6 listingsInterchange 2020–2022$250$170 – $350
213 Type (Sedan and Wagon), E53 (integrated intercooler)6 listingsInterchange 2020–2022$250$170 – $350
238 type (Coupe and Convertible), E450 (integrated intercooler)6 listingsInterchange 2020–2022$250$170 – $350
238 type (Coupe and Convertible), E53 (integrated intercooler)6 listingsInterchange 2020–2022$250$170 – $350
Model-year comparison
What does a Mercedes E Class intake manifold cost by year?
202249 listingsFits 4 years$235$64 – $350202163 listingsFits 5 years$235$50 – $3502020227 listingsFits 8 years$100$25 – $4252019268 listingsFits 9 years$115$25 – $4252018166 listingsFits 7 years$100$25 – $4002017336 listingsFits 10 years$125$25 – $4252016887 listingsFits 12 years$75$25 – $40020151,230 listingsFits 10 years$150$25 – $425
Market analysis
How much does a used Mercedes E Class intake manifold cost?
Asking prices for a used Mercedes E Class intake manifold are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 120% premium over grade-C stock, with grade-A medians at $123.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 213 Type (Sedan and Wagon), E350, lists at a $80 median, while 238 type (Coupe and Convertible), E53 (integrated intercooler) commands $250, a 213% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2016 units carry the lowest median at $75, while 2021 tops the table at $235. Parts from 2012–2023 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 12 compatible years.
Against comparable vehicles, the Mercedes E Class sits 30% below the Mercedes S Class ($181), 46% below the Ram 3500 ($235), and 1% above the Subaru WRX ($125) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used intake manifold: what to check
- Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
- Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
- Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
- Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
- Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.
Keep browsing this vehicle
What other Mercedes E Class parts are priced?
01wide ±183%
Side Mirror
$438median
$94$1,693
02wide ±253%
Axle Shaft
$210median
$40$1,101
03wide ±215%
Wheels
$339median
$59$1,520
04wide ±105%
Headlight Assembly
$1,175median
$440$2,901
05wide ±172%
Tail Light
$255median
$70$947
06wide ±236%
Radiator
$201median
$50$1,000
07wide ±262%
Strut
$222median
$37$1,200
08wide ±258%
Grille
$175median
$30$934
09wide ±251%
Fender
$302median
$95$1,610
10wide ±194%
Turbocharger
$487median
$86$1,975
11wide ±121%
Steering Rack
$930median
$148$2,394
12wide ±289%
Transmission
$1,050median
$199$6,270
Price comparisons
Compare Mercedes E Class intake manifold prices
Intake Manifoldcompare
MercedesSClassvsMercedesEClass
Class$181
Class$126
$55 diff4,588 listings
Intake ManifoldcompareRam3500vsMercedesEClass
3500$235
Class$126
$109 diff4,048 listings
Intake ManifoldcompareMercedesEClassvsSubaruWRX
Class$126
WRX$125
$1 diff3,767 listings
Intake ManifoldcompareMercedesEClassvsMercedesGLEClass
Class$126
Class$100
$26 diff3,701 listings
Intake ManifoldcompareMercedesEClassvsLandRoverRangeRover
Class$126
Rover$150
$24 diff3,435 listings
Intake ManifoldcompareMercedesEClassvsHyundaiSonata
Class$126
Sonata$136
$10 diff3,295 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±99%
Acura ILX
$125median
$30$278
Acurawide ±75%
Acura Integra
$56median
$36$120
Acurawide ±237%
Acura MDX
$99median
$30$500
Acurawide ±140%
Acura RDX
$75median
$25$235
Acurawide ±120%
Acura TLX
$110median
$38$303
Audiwide ±138%
Audi A4
$90median
$50$299
Mercedeswide ±235%
Mercedes C Class
$113median
$20$550
Mercedeswide ±124%
Mercedes GLA Class
$86median
$45$258
Mercedeswide ±226%
Mercedes GLC Class
$116median
$25$550
Mercedeswide ±263%
Mercedes GLE Class
$100median
$25$550
Mercedeswide ±135%
Mercedes S Class
$181median
$35$525
Mercedeswide ±157%
Mercedes Sprinter
$175median
$50$600
Common questions
Mercedes E Class intake manifold FAQ
How much is a used intake manifold for a Mercedes E Class?
The median asking price is $126 across 1,951 priced listings from 153 yards. Grade-A units, the cleanest stock, have a median of $123. 2016 is the cheapest model year we track, with a median of $75.
How much does it cost to replace a Mercedes E Class intake manifold?
Using a used part, a Mercedes E Class intake manifold replacement typically runs $315–$875 all-in: the median used intake manifold for this model lists at $126, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.
Which Mercedes E Class model years does this price guide cover?
This guide currently has year-level pricing for 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Mercedes E Class intake manifold years are interchangeable?
Salvage-yard interchange data links Mercedes E Class intake manifold fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.