Used Toyota Highlander intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used Toyota Highlander intake manifold?

Asking prices from 277 salvage yards in 41 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026
Strong coverage943 priced of 1,230 observed2 variantsMethodology v2.1 →

Part overview

About the Toyota Highlander intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used Toyota Highlander intake manifold costs $55 to $530, with a median asking price of $222. Based on 943 priced salvage yard listings across the US, compatible across 2006–2025 (20 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$232
Grade B (good)$236
Grade C (fair)$100

Toyota Highlander intake manifold price snapshot

USD
Low
$55
Average
$222
High
$530
1,230 listings observed · 943 priced11d ago· How we price·

Report incorrect price

Reporting price for Toyota Highlander Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$60–$530696 listings
Grade BStandard used$95–$396107 listings
Grade CVisible wear$55–$25023 listings
Grade XUngraded$60–$495117 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $55–$530 overall range

Regional supply

Where the Toyota Highlander intake manifold is listed

We found priced Toyota Highlander intake manifold listings at 277 salvage yards across 41 states. California supplies the most, with 247 listings (17% of the total) from 25 yards. Location matters: yards in Illinois ask a median $115, while Michigan yards ask $280, 143% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California24725$220-1%
Texas1139$241+9%
Indiana8813$125-44%
Michigan8614$280+26%
North Carolina7014$232+5%
Illinois6814$115-48%
Florida6018$237+7%
Wisconsin5219$150-32%

States with at least 10 priced listings. % is versus the $222 national median.

Replacement cost

What is the Toyota Highlander intake manifold replacement cost?

ESTIMATE
Used part
$222
Toyota Highlander median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$410–$970
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Toyota Highlander Intake Manifold

$

Current avg: $222 — we suggest $189 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

2.5L40 listingsInterchange 2018–2025$250$150 – $500
2.4L4 listingsInterchange 2022–2025$266$211 – $266

Model-year comparison

What does a Toyota Highlander intake manifold cost by year?

$95$137$179$222$26420152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Toyota Highlander intake manifold cost?

Asking prices for a used Toyota Highlander intake manifold are unusually spread out: the top listing asks about 10 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 132% premium over grade-C stock, with grade-A medians at $232.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 2.5L, lists at a $250 median, while 2.4L commands $266, a 6% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $106, while 2020 tops the table at $251. Parts from 2006–2019 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 14 compatible years.

Against comparable vehicles, the Toyota Highlander sits 23% above the Mercedes S Class ($181), 6% below the Ram 3500 ($235), and 76% above the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other Toyota Highlander parts are priced?

Price comparisons

Compare Toyota Highlander intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Toyota Highlander intake manifold FAQ

How much is a used intake manifold for a Toyota Highlander?

The median asking price is $222 across 943 priced listings from 277 yards. Grade-A units, the cleanest stock, have a median of $232. 2016 is the cheapest model year we track, with a median of $106.

How much does it cost to replace a Toyota Highlander intake manifold?

Using a used part, a Toyota Highlander intake manifold replacement typically runs $410–$970 all-in: the median used intake manifold for this model lists at $222, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which Toyota Highlander model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Toyota Highlander intake manifold years are interchangeable?

Salvage-yard interchange data links Toyota Highlander intake manifold fitments across 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 20 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Toyota Highlander Intake Manifold Cost — From $55 to $530