Used Toyota Tacoma intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used Toyota Tacoma intake manifold?

Asking prices from 159 salvage yards in 35 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 18, 2026
Strong coverage602 priced of 868 observed2 variantsMethodology v2.1 →

Part overview

About the Toyota Tacoma intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used Toyota Tacoma intake manifold costs $45 to $360, with a median asking price of $136. Based on 602 priced salvage yard listings across the US, compatible across 2003–2026 (24 model years), updated Sep 18, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$141
Grade B (good)$125
Grade C (fair)$75

Toyota Tacoma intake manifold price snapshot

USD
Low
$45
Average
$143
High
$360
868 listings observed · 602 priced1mo ago· How we price·

Report incorrect price

Reporting price for Toyota Tacoma Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$46–$360395 listings
Grade BStandard used$50–$30079 listings
Grade CVisible wear$45–$956 listings
Grade XUngraded$50–$320122 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $45–$360 overall range

Regional supply

Where the Toyota Tacoma intake manifold is listed

We found priced Toyota Tacoma intake manifold listings at 159 salvage yards across 35 states. California supplies the most, with 284 listings (45% of the total) from 28 yards. Location matters: yards in Arkansas ask a median $90, while Arizona yards ask $186, 107% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California28428$114-16%
Texas5921$141+4%
Florida3812$100-26%
Arizona264$186+37%
Louisiana244$146+7%
Arkansas179$90-34%
Missouri157$150+10%
Oregon123$156+15%

States with at least 10 priced listings. % is versus the $136 national median.

Replacement cost

What is the Toyota Tacoma intake manifold replacement cost?

ESTIMATE
Used part
$136
Toyota Tacoma median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$325–$885
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Toyota Tacoma Intake Manifold

$

Current avg: $143 — we suggest $122 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2023)

3.5L (6 cylinder, 2GRFKS engine)40 listingsInterchange 2016–2023$136$55 – $305
2.7L (4 cylinder, 2TRFE engine)37 listingsInterchange 2016–2023$150$85 – $277

Model-year comparison

What does a Toyota Tacoma intake manifold cost by year?

$90$108$127$145$16420152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Toyota Tacoma intake manifold cost?

Asking prices for a used Toyota Tacoma intake manifold are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 88% premium over grade-C stock, with grade-A medians at $141.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 3.5L (6 cylinder, 2GRFKS engine), lists at a $136 median, while 2.7L (4 cylinder, 2TRFE engine) commands $150, a 10% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $100, while 2024 tops the table at $156. Parts from 2003–2015 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 13 compatible years.

Against comparable vehicles, the Toyota Tacoma sits 25% below the Mercedes S Class ($181), 42% below the Ram 3500 ($235), and 8% above the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other Toyota Tacoma parts are priced?

Price comparisons

Compare Toyota Tacoma intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Toyota Tacoma intake manifold FAQ

How much is a used intake manifold for a Toyota Tacoma?

The median asking price is $136 across 602 priced listings from 159 yards. Grade-A units, the cleanest stock, have a median of $141. 2021 is the cheapest model year we track, with a median of $100.

How much does it cost to replace a Toyota Tacoma intake manifold?

Using a used part, a Toyota Tacoma intake manifold replacement typically runs $325–$885 all-in: the median used intake manifold for this model lists at $136, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which Toyota Tacoma model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Toyota Tacoma intake manifold years are interchangeable?

Salvage-yard interchange data links Toyota Tacoma intake manifold fitments across 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 24 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Toyota Tacoma Intake Manifold Cost — From $45 to $360